Feature
7 inch Color LCD , Touch screen
Flow cell and Cuvette test mode compatible
Real time curve showing
7 wavelength , 90 test item pre-programmed
Memory for 10,000 sample results
Light source hibernate function making lamp life longer
RS232 interface, PC connecting
Feature
7 inch Color LCD , Touch screen
Flow cell and Cuvette test mode compatible
Real time curve showing
7 wavelength , 90 test item pre-programmed
Memory for 10,000 sample results
Light source hibernate function making lamp life longer
RS232 interface, PC connecting
Product description QT-CO2 is a fast response carbon dioxide meter with built-in temperature compensation function. It can accurately detect CO2 within the whole temperature range. It is equipped with a ceramic base which has better thermal conductivity, therefore the preheating response is between 2 to 5 minutes.
Feature:
GPS coordination can be recorded
Record data Automatically or manually
Wireless data transmission via Wi-Fi
Recognize sensors by two-dimensional code
Automatically recognize connected sensors
Terminal memory card is up to 32G
Display real-time data and curve of recorded data
Export data to Excel for analysis
Introduction
The J23-80 puncher press machine is a general punch machine used for pressing sheet metal, which is commonly used in watch, toys, tableware, telecommunications, instrumentation, electrical machine, automobile making and so many other fields.
When the press machine is equipped with the automatic feeding device, it can carry out semi-automatic pressing. The nominal force of the equipment occurs 5mm distance from the slider to bottom dead center. In the design of cold pressing process, the working rules are selected according to the pressure curve diagram. When selecting, the intersection between use pressure and corresponding crank angle must be within the scope of strength.
Technical Parameter
Item Units
Nominal pressure KN 800
Nominal stroke mm 7
Slide stroke mm 130
Stroke number min-1 40
Mold set height mm 390
Mold height adjusting amount mm 80
Slide block central distance mm 310
Working table size Front and back mm 570
Left and right mm 860
Working table hole size Front and back mm 310
Left and right mm 450
Diameter mm 400
Sliding block underside size Front and back mm 360
Left and right mm 400
Die shank hole size Diameter mm 60
Depth mm 70
Stand column distance mm 400
Working table thickness mm 85
Inclination Angle 20
Boundary dimension Front and back mm 1990
Left and right mm 1500
Height mm 2960
Motor power KW 7.5
Weight Kg 5800
Description
J21-100 punch presses are large machines with a c type frame, power press with fixed bed and slide block's reciprocating motion to finish the punching work. It is usually used for stamping and forming communications, computers, household appliances, furniture, vehicles(cars, motorcycles, bicycles metal parts), etc.
Characteristics
1.It adopts steel welding structure with high stiffness and reasonable structure and low noise.
2.Combined type air friction clutch which is easy to install and repair.
3.The main motor have positive inversion function and with duplex magnetic valve to ensure the safety.
4.The crank connecting rod serves as the working mechanism. Crank connecting rod is rigid, so the movement of the slider is mandatory, times of strokes in per minute of slider and the movement curve of the slider are fixed.
Technical parameter:
Item Units Value
Nominal pressure Kn 1000
Nominal stroke Mm 8
Slide stroke Mm 130
Stroke number Min-1 38
Mold set height Mm 400
Mold height adjusting amount Mm 80
Slide block central distance Mm 340
Working table size Front and back Mm 630
Left and right Mm 950
Working table hole size Front and back Mm 320
Left and right Mm 450
Diameter Mm 400
Sliding block underside size Front and back Mm 360
Left and right Mm 400
Die shank hole size Diameter Mm 60
Depth Mm 70
Stand column distance Mm 400
Working table thickness Mm 95
Boundary dimension Front and back Mm 2250
Left and right Mm 1600
Height Mm 2900
Motor power Kw 11
Weight Kg 7150
Liquid Filling Automatic Precision Double Platform Dispenser for Electronic Product
As the machine designed by double table structure, its most outstanding function is that it can cycle operation, save time of take and put material, improve production efficiency. With point, line, face, arc, circle, and irregular curve continuous interpolation and four axes linkage, and other functions.
Four axis designed Y&D 5400-2Y dispensing robot arm is a newly designed dispensing robot arm with a working range of X/Y/Z axis of 500 300 300 100mm. It is a very popular type of dispenser in electronic products. This kind of dispensing robot arm is compact in size and economic in price which have the function of interpolation. All the axis cof this kind of dispensing robot arm can do dispensing as make points, draw lines, arc, etc. It is operate by the teach pendent which is very easy to operate and users can learn it quickly and make programs in a few minutes. The program dates can be stored in the CF Card in the machine for next time use for which dispensing the similar products. It ca4000 points in each grup). Y&D 7500N is really quite useful in a wide range, such as
Semiconductor packaging, Fixing and protection of PCB electronic
Omponents, Packaging adhesion of LCD glass panel, Coating of panel of the mobile phone or dispensing of the key,
Speaker dispensing, Dispensing seal of battery boxes
Coating of parts of vehicles and machines, Coating adhesion of hardware parts, Coating of rationed gas, liquid filling, Chip bonding, etc.
Applicable fluid: Silica gel, EMI conductive adhesive, UV glue, AB glue, fast dry
Glue, epoxy adhesive, sealant, hot glue, grease, silver glue, red glue, solder paste,
Cooling paste, prevent solder paste, transparent lacquer, screw fixation agent, etc.
Main use: The product in the process of bonding, infusion, coating, sealing, filling,
Drop, linear/arc/round glue, etc. Dispense in point, line, surface, arc, circle and
Irregular curve and triaxial linkage function is available etc.
Specifications
Item Y&D5400-2Y
X/Y/Z working area (mm): 500/300/300/100
Load worktable: 11.0kg/5.0kg
Speed PTP X&Y/Z (mm/sec)0.1~800/500
Repeatability: 0.01mm / axis
Resolution: 0.01mm/axis
Data memory: 100 programs, 4000 points/program
Data storage: CF card/pc Storage & USB
Display: Teach pendant LCD
Operation system: PTP (point to point) & CP (continuous path)
Full Automatic Four Axis Cycle Working Spraying Equipment for Industry
As the machine designed by double table structure, its most outstanding function is that it can cycle operation, save time of take and put material, improve production efficiency. With point, line, face, arc, circle, and irregular curve continuous interpolation and four axes linkage, and other functions.
Four axis designed Y&D 5400-2Y dispensing robot arm is a newly designed dispensing robot arm with a working range of X/Y/Z axis of 500 300 300 100mm. It is a very popular type of dispenser in electronic products. This kind of dispensing robot arm is compact in size and economic in price which have the function of interpolation. All the axis cof this kind of dispensing robot arm can do dispensing as make points, draw lines, arc, etc. It is operate by the teach pendent which is very easy to operate and users can learn it quickly and make programs in a few minutes. The program dates can be stored in the CF Card in the machine for next time use for which dispensing the similar products. It ca4000 points in each grup). Y&D 7500N is really quite useful in a wide range, such as
Semiconductor packaging, Fixing and protection of PCB electronic
Omponents, Packaging adhesion of LCD glass panel, Coating of panel of the mobile phone or dispensing of the key,
Speaker dispensing, Dispensing seal of battery boxes
Coating of parts of vehicles and machines, Coating adhesion of hardware parts, Coating of rationed gas, liquid filling, Chip bonding, etc.
Applicable fluid: Silica gel, EMI conductive adhesive, UV glue, AB glue, fast dry
Glue, epoxy adhesive, sealant, hot glue, grease, silver glue, red glue, solder paste,
Cooling paste, prevent solder paste, transparent lacquer, screw fixation agent, etc.
Main use: The product in the process of bonding, infusion, coating, sealing, filling,
Drop, linear/arc/round glue, etc. Dispense in point, line, surface, arc, circle and
Irregular curve and triaxial linkage function is available etc.
Specifications
Item Y&D5400-2Y
X/Y/Z working area (mm): 500/300/300/100
Load worktable: 11.0kg/5.0kg
Speed PTP X&Y/Z (mm/sec)0.1~800/500
Repeatability: +/- 0.01mm / axis
Resolution: 0.01mm/axis
Data memory: 100 programs, 4000 points/program
Data storage: CF card/pc Storage & USB
Display: Teach pendant LCD
Operation system: PTP (point to point) & CP (continuous path)
Interpolation linear/circular: 4 axis
Teaching method: Teach pendant
I/O signals: 8 inputs / 8 outputs
External interface: RS232
Power supply: AC 90~260V 320W
Operating temperature: 0~40 C
Motor system: Micro stepping motor
If you have any interest and questions about us and our products,
Pls feel free to let me know, I promise to give you the quickest reply as soon as I got it.
Widely Collocate Easy Programming Hysol Filling Machine with Tank
Three axis designed Y&D 7500N dispensing robot arm is the largest type in the 7000 series dispensing robot arm with a working range of X/Y/Z axis of 500 500 100mm. It is a very popular type of dispenser in electronic products. This kind of dispensing robot arm is compact in size and economic in price which have the function of interpolation. All the axis cof this kind of dispensing robot arm can do dispensing as make points, draw lines, arc, etc. It is operate by the teach pendent which is very easy to operate and users can learn it quickly and make programs in a few minutes. The program dates can be stored in the CF Card in the machine for next time use for which dispensing the similar products. It ca4000 points in each grup). Y&D 7500N is really quite useful in a wide range, such as
Semiconductor packaging, Fixing and protection of PCB electronic
Omponents, Packaging adhesion of LCD glass panel, Coating of panel of the mobile phone or dispensing of the key,
Speaker dispensing, Dispensing seal of battery boxes
Coating of parts of vehicles and machines, Coating adhesion of hardware parts, Coating of rationed gas, liquid filling, Chip bonding, etc.
Applicable fluid: Silica gel, EMI conductive adhesive, UV glue, AB glue, fast dry
Glue, epoxy adhesive, sealant, hot glue, grease, silver glue, red glue, solder paste,
Cooling paste, prevent solder paste, transparent lacquer, screw fixation agent, etc.
Main use: The product in the process of bonding, infusion, coating, sealing, filling,
Drop, linear/arc/round glue, etc. Dispense in point, line, surface, arc, circle and
Irregular curve and triaxial linkage function is available etc.
Specifications
Item Y&D7500N
X/Y/Z working area (mm) 500/500/100
Load worktable10.0kg/5.0kg
Speed PTP X&Y/Z (mm/sec)0.1~800/500
Repeatability 0.01mm / axis
Resolution0.01mm/axis
Data memory100 programs, 4000 points/program
Data storageCF card/pc Storage & USB
DisplayTeach pendant LCD
Operation systemPTP (point to point) & CP (continuous path)
Interpolation linear/circular 3 axis
Teaching methodTeach pendant
I/O signals8 inputs / 8 outputs
External interfaceRS232
Power supplyC 90~260V 320W
Operating temperature0~40 C
Motor systemMicro stepping motor
Dimensions685 670 660
Weight41kg
Description
It is used for the measurement of the brake slip of crane hoisting mechanism; deflection, resilience, camber, dynamic stiffness of the crane girder; the speed and acceleration of crane and crab/trolley; Crane hydraulic cylinder inspection.
It can also be used to measure the travelling speed and braking distance of other large equipment moving parts, as well as testing deformation of large-sized objects.
Functions
The entire system requires only one digital control terminal to complete all operations.
All the measurement items are transmitted through Bluetooth or wire.
The test results are directly displayed on the digital terminal.
Intelligent curve analysis allows manual comparison of measurement results.
The system can save unlimited sets of test data over the years.
Intelligent analysis of possible risks of crane operation through changes in data.
The brake slip can be measured at any angle below the crane, which fully guarantees the safety of operators and measuring instruments.
No need to install the target and mark on the measured object to complete the deflection measurement.
The instrument adopts telephoto imaging system, which can observe the measured target from a long distance.
Speed measurement function: it can measure the lifting speed of the crane lifting mechanism.
No wiring on site, no crane control circuit required, greatly reducing the difficulty and intensity of work and increasing safety.
Linear motion speed measurement.
Measurement information is automatically collected by the instrument, no manual input required.
The instrument uses a high-precision absolute encoder to ensure measurement at any angle without affecting the accuracy of the measurement.
The instrument uses a high-precision, high-frequency rangefinder to ensure the accuracy and real-time of the ranging data.
Adopt dedicated intelligent digital terminal for data collection and data processing, friendly user interface and simple operation
The host is composed of a ranging sensor and a theodolite installed on the base.
