Based on the serial number 10KA0976, your equipment is a SkyTrak 10000M ATLAS telehandler, also known as the All-Terrain Lifter Army System (ATLAS) with a 10,000 lb capacity. Here are the key specifications:
Lifting Capacity: 10,000 lbs (4,536 kg)
Maximum Lift Height: Approximately 27.5 ft (8.38 m) with the 10,000 lb carriage
Maximum Reach: Approximately 24 ft (7.4 m)
Dimensions:
Height: 102 inches (259 cm)
Width: 100 inches (254 cm)
Turning Radius: 13.5 ft (4.1 m)
Frame Tilt: 9 degrees each way
Hydraulic Reservoir Capacity: 55.6 gallons (214 liters)
Fuel Tank Capacity: 44 gallons (167 liters)
Boom: Telescopic 3-stage
Steering Modes: 2-wheel, 4-wheel, and crab steering
Fording Depth: Up to 36 inches (91 cm)
Transportability: Air transportable in C-130, C-141, C-5A, and C-17 aircraft
LPR based advanced access control system enables high-efficient and user convenient parking lot operation overcoming all the weak points of legacy RF card type system.
This advance steel structure car parking system are widely used in residential communities, offices, universities, buses stations, hotels etc both on the ground and underground to provide special parking lots with less land and less investment.
Features:
1. Space Saving: This kind of multi-level steel structural provide more parking lots with same land area.
2. Economical: The cost of one steel structural park lot is normally no more than 20% of the land price, operation cost and maintenance cost is extremely low.
3. Technological: This kind of parking system is very reliable, automatic, efficient and safe.
4. Long life: This structure can safely operate for at least 50 years.
5. Flexibility: This kind of system is easy to install and uninstall as requested.
This is cutting edge intelligence type system to guide to finding parked vehicle easily, that reads parked vehicle number suing contents based recognition technology and saves the surroundings of vehicle with mega pixel ultra high resolution camera.
Used Engines
HS Code 840820
PRICE = US$1,800/PIECE CIF
ORIGIN: THAILAND
PACKAGE: TONS
MIN ORDER:5 PIECES
DESCRIPTION
There are several types of engines used in automobiles. The car engine types are generally described based on two factors: the fuel type and engine layout/number of cylinders (cylinder configuration. One of the most common types of engines is petrol and diesel engines. But that's a generic way to describe a car engine.
SPECIFICATION
General Engine Specifications
Basic Engine Specifications
I-6, 4-Stroke-Cycle-Diesel
Displacement .......................................................................... 12.88 L (in3)
Rated engine speed .................................................................... 2300 rpm
High idle speed ........................................................................... 2530 rpm
Low idle speed (programmable) ................................................... 550 rpm
Peak torque ......................................................... 3,355 N m @ 1200 rpm
Bore ....................................................................................... 135 mm (in)
Stroke ...................................................................................... 150 mm (in)
Aspiration .................................. Supercharged-Turbocharged-Aftercooled
Governor ............................................................................................. ECU
Fuel system type .................................................................. Common Rail
Length ........................................................................... 1960 mm (77.1 in)
Length to flywheel housing ........................................... 1476 mm (58.1 in)
Width ............................................................................. 1195 mm (47.0 in)
Height ............................................................................ 1117 mm (43.9 in)
Weight, net dry (approx.) ................................................1672 kg (3686 lb)
Rotation (from flywheel end) .......................................... Counterclockwise
Flywheel housing/flywheel .................................................... SAE No. 01M
Flywheel teeth ....................................................................................... 155
Tolerances
Power ............................................................................................... +/- 3%
Exhaust Stack Temperature ............................................................ +/- 8%
Inlet Air Flow .................................................................................... +/- 5%
Intake Manifold Pressure ............................................................... +/- 10%
Exhaust Flow ................................................................................... +/- 6%
Specific Fuel Consumption .............................................................. +/- 3%
Heat Rejection ................................
Work Principle
This system is designed with 4 layers and multi-columns layout. Each layer is designed with a spare space as an exchanging space. All spaces can be auto-lifting freely except the spaces in the first layer and all the spaces can be auto-transverse moving except the spaces in the top layer. When a space needs to park or release a car, all spaces under the space will make a one space transverse moving to the empty space and forms a lifting channel under this space. In this case, the space will go up and down freely. When it reaches the ground, the car will go out and in freely.
Characteristics
Low area coverage and high usage rate of space.
The layers and columns will be added to raise the number of cars.
Made according to the customer's requirements.
It may be designed with full-closed style to adjust the surrounding environment.
It operates steadily without noise and with fast operating speed and short parking and releasing time.
Multi-channels safety protection and series of safety protection devices for anti-dropping, anti-crashing and anti-overloading.
This system is designed with 3 layers and multi-columns layout. Each layer is designed with a spare space as an exchanging space. All spaces can be auto-lifting freely except the spaces in the first layer and all the spaces can be auto-transverse moving except the spaces in the top layer. When a space needs to park or release a car, all spaces under the space will make a one space transverse moving to the empty space and forms a lifting channel under this space. In this case, the space will go up and down freely. When it reaches the ground, the car will go out and in freely.
Characteristics
Low area coverage and high usage rate of space.
The layers and columns will be added to raise the number of cars according to the customer's requirements.
It may be designed with full-closed style to adjust the surrounding environment.
It operates steadily without noise and with fast operating speed and short parking and releasing time.
Multi-channels safety protection and series of safety protection devices for anti-dropping, anti-crashing and anti-overloading
