Introduction of the key equipment:
1.Twelve lines of automatic punching, leveling, cutting-off precision rollforming machines.
2.Two automatic epoxide resin electrostatic powder coating line.
Safety standard: fem 10.2.02
Surface treatment: expoxy-polyester powder coating
Standard colour:
Upright frame: sky blue / ral 5015 (or according to your requirements)
Beam: purer orange / ral 2004 (or according to your requirements).
Upright section: 50x50mm, 60x50mm
Beam: step beam, open beam, z beam
Shelf: plywood panel, wire decking panel, steel panel
Loading capacity: from 200kgs to 1000kgs per level.
1. Light duty shelving, 100kg to 250kg loading capacity per level.
2. Simple structure, easy assembly, cheap shelving. Widely used in offices, garages, schools, hospitals, museums, libraries, etc.
3. Angle steel post, with many hole styles for choice, freely adjusted by 50mm.
4. No beam structure. Steel shelf panel connected with post by H hook or by corner plate.
5. Excellent in quality and beautiful in appearance.
Adopt the structure that the beam hitching on the frame, the beam of this kind rack can be easily adjusted by step of 50mm. This kind of rack is more bearing and longer beams, usually the bearing between 350kgs and 800kgs.
Features:
1) luxurious and elegant
2) optimizes warehouse space
3) the layer can be steel plate or wood plate
4) the height can be adjusted easily by 50mm one pitch
5) easy to assemble without any screw thread connectors
Long span shelf /medium-duty racking: film + cardboard
Cut-in composite step beam on which steel or wooden panels are assembled; the height of each layer is easily to be adjusted by 50mm, the capacity of each level is up to 800kg; the racking can be customized based on clients requirements, compared with the medium-duty shelving, it is more suitable for storing metal components and widely used in the manufacturing industry.
1. Upright: 50*58*1.5/2.0mm, 50mm pitch.
2. Step beam: 50*30*1.5p, 60*40*1.5p, 80*50*1.5p.
3. Steel shelf: 0.7 or 0.8mm, designed by loading capacity request.
Pallet rack system is a steel structure in which inventory is stacked in multiple levels. Pallet racks are typically built for optimum density of storage and designed for easy access to inventory, reconfigurable use, and simple assembly.
Pallet racking:
1) standard sizes to fit most racks
2) fully utilizes vertical space
3) suitable for storing pallets
4) the bearing capacity per shelf of such rack may reach 4, 500kg
5) durable finish, clean appearance, fireproof
6) versatile system with unsurpassed adaptability for industries
7) pallets are supported between load-supported beams, easy to assemble and manage.
All composite racking structure, fit for much higher warehouse,
storage goods by manual and storage generous quantity goods.
It can be designed into two or three layer according to actual
situation and ensure full use of the space. It is widely used
in the areas of automobiles, electronics and mechanics, etc.
Features:
Mezzanine Racking&Multi-tier racking is suit for high warehouse,
light cargo, pick by man and large storage quantity situation,
which can increase the using space.
Multi-tier racking systems are widely acceptable to automobile
and logistics industry. Its bottom level can be shelf form and above flat
form or both shelf form.
The bottom shelf is not only storage goods place but also support the
above level. Can be design many layers(usually 2-3 layers),
and with staircases handrails, elevator and lighting systems.
If the bottom beam distance can make short, the whole system
cost can low down a lot too.
