product Description : These Products are Exported with Stringent Adherence to Standard Russian Export Specifications with Respective GOST. Price of product ( USD price or FOB price) : Product will be priced in USD$ Based on an Appropriate PLATTS INDEX or a FIXED Price and the Agreed Upon Shipping Method. The Price will be Mutually Agreed to by Buyer and Seller Product origin : Russian Federation Key Specifications/Delivery/Logistics : 1. Certification SGC or Equivalent 2. Payment Terms = Letter of Credit ( Details to be agreed upon by Buyer and Seller 3. Delivery Time = Varies by Destination 4. Port of Loading = TBD Minimum Order Size & Contract Term : Minimum Monthly Quantity = 100,000 MT X 12 Month Contract Required with R & E up to 120 Months
D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators.
D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names.
Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400
Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil.
The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol.
D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.
Diesel Gas Oil Ultra-Low Sulphur Diesel (ULSD) is a refined diesel fuel with significantly reduced sulfur content, meeting stringent environmental standards. It ensures cleaner emissions, improved engine performance, and fuel efficiency, making it ideal for modern diesel engines in transportation and industrial applications.
Ultralow sulfur diesel ULSD is a cleanerburning diesel fuel that contains a maximum of 15 parts per million ppm of sulfur ULSD contains 97 less sulfur than lowsulfur diesel LSD which typically contains 500 ppm of sulfur The European Union began mandating the reduction of diesel sulfur content in 1993 and the United States started phasing in ULSD requirements for highway vehicles in 2006 It was developed to allow for the use of improved pollution control devices that reduce diesel emissions ULSD can significantly reduce emissions when used in combination with cleanerburning diesel engines and vehicles It may react with strong acids or strong oxidizing agents such as chlorates nitrates and peroxides You should avoid contact with heat sparks fire and oxidizing agents The appearance of ULSD should be clear and bright free from visible sediment and water
Diesel EN590 10 PPM is a type of diesel fuel that meets the European standard EN590 for automotive diesel oil. The 10 PPMâ?? refers to the maximum sulphur content of the fuel, which is 10 parts per million (ppm) or less.
Low-sulphur diesel fuels such as EN590 10 PPM are required in many parts of the world to meet emissions regulations and reduce air pollution. The lower sulphur content in the fuel allows diesel engines to operate more efficiently and with less emissions of harmful pollutants such as particulate matter and nitrogen oxides.
EN590 10 PPM diesel fuel is commonly used in modern diesel engines, including those in passenger cars, trucks, buses, and heavy equipment. It is typically available at fuel stations that offer diesel fuel, and is used in many countries throughout Europe and around the world.
(EN590) 10 PPM/50PPM
Origin: Kazakhstan
The detailed specification: Meets all International Standards
Total Spot quantity order: 100,000MT
The price and discount:
- FOB ROTTERDAM AND CIF OTHER COUNTRY: DISCOUNT $50 PER MT
FROM NWE PLATTS
- CIF ASIA: DISCOUNT $70 PER MT FROM SINGAPORE PLATTS
Shipment:
- TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per
conditions in Seller`s FCO
Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via
MT103
Payment Procedure: According to the terms of the contract, to be mutually agreed upon
by Buyer & Seller.
Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST
Product Description - Is one of a number of different grades of diesel oil
Price of product ( USD price or FOB price) - All of the various product prices/offers we receive can frequently change, therefore, please be assured we seek to find the best offers possible, and will always pass the most competitive prices/offers available to our buyers.
Product origin - Middle East and USA
Key Specifications/Special Features - D2 Diesel Gas Oil is used in most types of diesel powered engines
Minimum Order Size and Packaging details - "First initial trial shipment of 10,000 MT, followed by a 12 month contract, with monthly shipments between 25,000 to 100,000 MT per month.
Crude Oil:
Bonny Light
REBCO
ESPO (Siberia Pacific Oil)
Basra Light
WTI
Southern Green Cayon Blend
Olmeca Mexican crude
Heavy Crude, etc.
Product Description :
Crude oil is a mixture of hydrocarbons that formed from plants and animals that lived millions of years ago. Crude oil is a fossil fuel, and it exists in liquid form in underground pools or reservoirs, in tiny spaces within sedimentary rocks, and near the surface in tar (or oil) sands
Price of product ( USD price or FOB price) : Price on request
Product origin : Worldwide
Key Specifications/Special Features :
Specifications for types/grades of crude (special grade needed by buyer)
will be issued after received your credible purchase request in the form LOI/ICPO docs.
Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.
