PT Bara Artho Joyo

Wood Based Powder Activated Carbon is used for decolorizing in sugar liquors, juices,soybean and food industries. Wood powder activated carbon is non-toxic, without taste and it has the appearance of a fine black powder.

Mb Value : 140 to 320
Ash:7 to 12%

Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water.

Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size.

Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements

Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power.

The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm.

The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.

Selected Anthracite Coal Granular Activated carbon for amine purify ,remove EDA, MEDA, DIPA, etc
Granular Coal based activated carbon is made from coal though high temperature activation .It is black in appearance, non-toxic and tasteless, with large pores. It is featured by strong adsorption capacity, high wear-resistant performance etc. It is evtensively applied to solvent recovery, catalyst carriers, gas adsorption and water purification in the field of chemicals, environmental protection, power plant, electronics, petrochemical industry, farming, medicine, marine transportation.
Packing
25kg PVC bags+1MT big bag or as customers'requested
Trade terms
FOB CNF CIF
Payments
terms
1).T/T 30%advance ,
2).the balance against copy of B/L
Delivery time
After we receive deposit within 7-10days
Sample
Sample is free within 1kgs

Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water.

Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size.

Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements

HiraChem is your specialist supplier of Granular Activated Carbon.
Pure carbon which is gold recovery granular activated carbon is coconut-shell-based granular activated carbons specially designed for gold recovery operations. GR was developed to be a consistent, high performance, high activity gold recovery carbon product line. The activated carbon's ability to achieve high gold loadings and the relative ease with which they can be stripped enables gold processors to obtain the highest possible yields from ores with high silver/gold ratios, carbonaceous ores and ores containing other metals that complex with cyanide; for example, copper and nickel. In Carbon in Leach (CIL), Carbon in Pulp (CIP), and Carbon in Column (CIC) circuits, it is essential that the activated carbon employed provides excellent process performance, minimal losses due to attrition, and minimal maintenance problems.

Through the years, Pure carbon has continually upgraded its manufacturing processes to ensure that it continues to provide high quality products. Steps have been added to the manufacturing process which have improved the carbon's resistance to abrasion and reduced its tendency to plug retention screens in adsorption tanks. Platelets (flatter granules which are relatively long and wide while not particularly thick) can end up oriented in such a manner that they pass through the retention screens. This results in a loss of gold-containing carbon, which directly affects percent recovery and pro stability. In order to have a product that has less tendency to plug screens with "platelets," GR is also processed through a vee-wire screen and de�­dusted. GR products are manufactured specifically for gold adsorption. As a result, the quality of the carbon is extremely consistent and tailored to gold recovery applications. GR activated carbon enable the extraction of even trace amounts of gold from every ton of ore, even when processing average or low-grade ores. Pure Carbon expertise in activated carbon application technology is a valuable resource for designing and optimizing.

We are supplier and exporter of Hematite Powder.

Hematite Powder is a mineral, coloured black to steel. It is mined as a main of iron ore and used as a weighting agent in oil drilling. It is the mineral form of iron(III) oxide (Fe2O3). Fluids weighted with API Hematite Powder contain fewer solids by volume than, making higher mud fluids possible. API Grade Hematite Powder is applicable in all types of drilling fluids, including freshwater, seawater and oil-base muds. It is used as a density increasing product, used as a weighting agent and in the paint industry. Hematite is also a harder mineral than Barite so it is more resistant to particle size degradation.

High Density Hematite Powder API Grade -SG = 5.19 - 5.47 -Fe2O3 = 96.70% -Fe = 71.82% -SiO2 = 0.89% -Mesh Size (passing at 98%) = 325

Potash Feldspar:

We have come up as a dependable firm bringing forth Potash Feldspar all over the world. Based in India, we are exporting Potash Feldspar in varied quantity packs. Potash Feldspar are processed and are used for varied industrial applications. Further, we keeping in mind the budget constraints in mind, we offer Potash Feldspar at the market leading prices.

About Feldspar:
Feldspar is non-plastic Potassium or Sodium Alumino silicate mineral represented as KAlSi38or NaAlSi38. Feldspar is used generally for the following purposes :

Ceramic Manufacturing formulations : In making the body composition of several types of ceramics and in preparation of glazes and enamel, Glass Manufacturing and Abrasive Manufacturing.

It is used along with Ball Clay, Kaolin and quartz for tiles and sanitary Wares manufacturing. The presence of iron even in small quantity tends to impart coloration.