Product composition: Sn99.93-Cu0.7
Product diameter: 315*15*11mm
Product weight: 500g/piece
Working temperature: 265-275
Flux method: manual dip tin, wave solder
Product packaging: 20KG/carton
Product use: suitable for welding of transformer products
The characteristics of the tin bar: it has bright and full solder joints, and it will not be soldered and other undesirable phenomena. Add enough antioxidant elements, strong antioxidant ability. Made of pure tin, less tin dross, reducing unnecessary waste. After melting, the amount of slag is less than that of ordinary solder, and it has excellent oxidation resistance. After melting, the viscosity is low, the fluidity is good, and the weldability is high. Due to very few oxidation inclusions, the phenomenon of sharpening and bridging can be minimized, the welding quality is reliable, and the solder joints are bright and full.
Product ingredients: Sn99.95
Working temperature: 265-275
Packing: net weight 25 1.5kg per ingot, bundled with galvanized steel strips, 40 ingots per bundle, net weight 1000 30kg
Specifications: 400cmX100cmX100cm
The tin ingot has good oxidation resistance, low tin dross, cost saving, and the solder joints are bright, plump and uniform. And can produce the lowest consumption of solid solder joints. Its raw material is a silver-white and soft metal, which is similar to lead and zinc, but looks brighter. Its hardness is relatively low, and it can be cut with a knife. It has good ductility, especially when the temperature is 100 , it can be expanded into extremely thin tin foil, and the thickness can be as thin as 0.04 mm. It is also a metal with a low melting point. Its melting point is only 232 C. Therefore, as long as a candle flame is used
Product composition: Sn99.95
Product diameter: 315*15*11mm
Product weight: 500g/piece
Working temperature: 265-275
Flux method: manual dip tin, wave solder
Product packaging: 20KG/carton
Product use: suitable for welding of transformer products
Tin bar is a product in solder, which is used for soldering circuit boards. Made of pure tin, good wettability and fluidity, easy to tin. The solder joints are bright, full, and will not be soldered and other undesirable phenomena. Add enough antioxidant elements, strong antioxidant ability. Made of pure tin, less tin dross, reducing unnecessary waste.
