Contact Details:
Calpala Mevkii Organize Sanayi Bolgesi 2. Cadde No:1 Isdir/turkiye (Factory)
Ferhatpasa Mah. 99Th Street No:63
Atasehir- Istanbul (Sales Office)
Istanbul
Atasehir
Turkey
Hi-ox240 is the unidirectional room speed governor that applies to both passenger and freight elevators.
If the elevator descends with excessive speed, the descending brake will be used to support the general descending safety gear, enable the safety gear, and stop the car, playing the role of descending over-speed protection.
If the elevator ascends with excessive speed, the over-speed switch can be turned off to cut off the power and stop the car, playing the role of ascending over-speed protection.
Rated speed: equal to or lesser than 2.5m/s
Wire rope diameter (mm): 6, 6.3, 8
Sheave diameter (mm): 240
Tension force: equal to or more than 1000n
Super switch voltage grade: ac220v
Hi-ox240f is the two-way room speed governor.
If the elevator descends with excessive speed, the descending brake will be used to support the general descending safety gear, enable the safety gear, and stop the car, playing the role of descending over-speed protection.
If the elevator ascends with excessive speed, the over-speed switch can be turned off to cut off the power and stop the car, playing the role of ascending over-speed protection.
Rated speed: less than or equal to 2.5m/s
Wire rope diameter (mm):6, 6.3, 8
Sheave diameter (mm):240
Tension force: more than or equal to 1000n
Super switch voltage grade: ac220v
It can be used with magnetic rope brake of hiox-250
Hi-ox240a is the unidirectional machine-room-less speed governor.
If the elevator descends with excessive speed, the descending brake will be used to support the general descending safety gear, enable the safety gear, and stop the car, playing the role of descending over-speed protection.
If the elevator ascends with excessive speed, the over-speed switch can be turned off to cut off the power and stop the car, playing the role of ascending over-speed protection.
The electromagnet switch can be used to detect the actuation of the speed governor, and detect the elevator.
The remote control is available.
Rated speed: less than or equal to 1.75m/s
Wire rope diameter (mm):6, 6.3, 8
Sheave diameter (mm): 240
Tension force: more than or equal to 1000n
Super switch voltage grade: ac220v/dc24v
Switch voltage grade: ac220v/dc24v
Action magnet voltage grade: ac220v/dc24v
Hi-ox240e is the two-way machine-room-less speed governor.
If the elevator descends with excessive speed, the descending brake will be used to support the general descending safety gear, enable the safety gear, and stop the car, playing the role of descending overspeed protection.
If the elevator ascends with excessive speed, the overspeed switch can be turned off to cut off the power and stop the car. If the car dosen't stop due to some reason, the electrical switch will be operated to enable the electronic rope clamp, so as to control the overspeed protection on the elevator car.
The electromagnet switch can be used to detect the actuation of the speed governor, and detect the elevator.
The remote automatic reset is available.
Rated speed: less than or equal to 0.63m/s
Wire rope diameter (mm):6, 6.3, 8
Sheave diameter (mm): 240
Tension force: more than or equal to 1000n
Super switch voltage grade: ac220v/dc24v
Switch voltage grade: ac220v/dc24v
Action magnet voltage grade: ac220v/dc24v
Hi-oh10/16/20 series are spring built-in hydraulic buffers, and are used at the bottom of the shaft, if the elevator gets out of order and slides down, it will take the decelerating effect, and the knockout rod will trigger the switch, and then the safety circuit is enabled.
Oh-10:
Rated speed: less than or equal to 1.0m/s
Buffer weigh range: 300kg~2500kg
Pillar gully routing(s): 100mm
Free state (l): 388mm
A*b (mm):150*90
A*b (mm):150*90
Diameter c (mm): 14
Hydraulic oil brand: hl-46
Oil is needed: 0.48l
Oh-16:
Rated speed: less than or equal to 1.6m/s
Buffer weigh range: 700kg~5300kg
Pillar gully routing(s): 175mm
Free state (l): 625mm
A*b (mm):210*100
A*b (mm):270*150
Diameter c (mm): 18
Hydraulic oil brand: hl-46
Oil is needed: 1.7l
Oh-20
Rated speed: less than or equal to 2.0m/s
Buffer weigh range: 1000kg~5300kg
Pillar gully routing(s): 290mm
Free state (l): 915mm
A*b (mm):210*100
A*b (mm):270*160
Diameter c (mm): 18
Hydraulic oil brand: hl-46
Oil is needed: 2.6l
These belts perform exceptionally well in steam operated parboiled rice mills. These are manufactured in 4 ply and 6 ply weaving types. These belts are well known across the country as Chemical belts or Yellow Nylon Belts or Nylon conveyor belt with rigid in nature but light in weigh
