Engine
Model WEICHAI WD10G178E25
Engine type 6 cylinders, in-line, water colling, 4-stroke-cycle, turbocharge engine
Rated engine speed (rpm) 1850
Horsepower ( HP ) 160
Min. fuel consumption(g/kWh) â?¤215
Piston displacement(l) 9.726
Number-Bore X Stroke(mm) 6-126x130
Maximum torque (N m/rpm) 830/1150
Power Transmission System
Torque converter 3-element, 1- stage, 1- phase
Transmission Planetary gearing, hand manipulated, hydraulic shift, forced lubrication, 3 forward and 3 reverse speeds
Bevel gear Spiral bevel gear, splash lubrication, single-stage speed reduction
Steering clutch Wet, multi-disc, spring loaded, hydraulically separated, hydraulic control
Steering brake Wet, band type, pedal hydraulic booster, with parking brakes
Final drive Double reduction of spur gear, splash lubrication
Hydraulic System
Pump type Gear pump 07441-67503
Working pressure (Mpa) 13.7
System discharge(L/min) 250 (at engine speed 1850rpm)
Working cylinder type Double acting piston pump
Working cylinder lift number- Bore x Rod x Stroke (mm) 2-110 x 65 x 1026
Working cylinder tilt Bore x Rod x Stroke (mm) 160 x 70 x 140
Undercarriage System
Type Swing type of sprayed beam, suspended structure of equalizer bar
Carrier rollers 2 (each side)
Track rollers 7 (4-single flange, 3-double flange)
Track type Sealed, circular arc, triangular -grouser
Number of track shoes 44 (each side)
Width of track shoes(mm) 1070
Pith(mm) 203.2
Length of track on ground (mm) 3140
Coolant and Lubrication
Fuel tank (L) 320
Hydraulic tank (L) 108
Engine oil 20
Torque converter, transmission, bevel gear, steering clutch (L) 122
Final drive (L) 31 (each side)
Shantuis best-seller worldwide, this is a medium-duty workhorse that comes off the factory line in various configurations for specific work environments, e.g., desert, swamp, forest, high altitude, etc. It has a Tier IIIb Cummins engine for European markets and optional engines (Weichai and Shangchai) for other markets. The SD16 provides high performance with strong reliability, with Shantuis trademark value.
160 HP SD16 Technicalspecifications:
Blade Type Straight-tilt Angle U-Blade
Min. ground clearance: 400 mm 400 mm 400 mm
Ground pressure: 0.072 MPa 0.074 MPa 0.074 MPa
Min. turning radius: 4.466 m 4.513 m 4.545 m
Gradeability: 30° 30° 30°
Track gauge: 1880 mm 1880 mm 1880 mm
ENGINE Model & type
Shangchai SC11CB184G2B1/Weichai
WD10G178E25; water-cooled, in-line,
4-stroke injection direct
Rated power 120 kW
Number of cylinders 6126 x 130 mm (bore x stroke)
Piston displacement 9.726 L
Min. fuel consumption 214 g/kW?h
Maximum torque 765 N?m@1300 rpm
POWER
TRANSMISSION
SYSTEM Torque converter 3-element, 1 stage, 1 phase
Transmission Planetary gear type, power-shift, forced lubrication
Main drive
Spiral bevel gear, single stage speed reduction,
splash lubrication
Steering clutch
Lubricated, multidisc, spring loaded,
hand hydraulically separated,
inter-linking with steering brake
Steering brake
Lubricated, floating band structure,
foot brake with hydraulic booster
Final drive
2-stage speed reduction of spur gear,
splash lubrication
TRAVEL
SPEED Gear 1st 2nd 3rd
Forward 0~3.29 km/h 0~5.82 km/h 0~9.63 km/h
Reverse 0~4.28 km/h 0~7.59 km/h 0~12.53 km/h
UNDERCARRIAGE
SYSTEM Type
Sprayed beam, suspended structure of equalizer
Carrier rollers 2 each side
Track rollers 6 each side
Track type Assembled, single-grouser
Width of track shoes 510 mm
Pitch 203.2 mm
HYDRAULIC
SYSTEM Maximum pressure 14 MPa
Pump type Gear pump
Discharge 243 L/min
Bore of working cylinder no. 110 mm 2
BLADE Blade type Straight-tilt Angle U-blade
Dozing capacity 4.5 m3 4.3 m3 5.0 m3
Efficiency
(Theoretical value 40 m)
225 m3/h 225 m3/h 250 m3/h
Blade width 3388 mm 3970 mm 3556 mm
Blade height 1149 mm 1040 mm 1120 mm
Maximum drop below ground 540 mm 540 mm 530 mm
Maximum tilt adjustment 400 mm 400 mm
RIPPER
(OPTIONAL)
Maximum digging depth
of 3-shank ripper
572 mm
Weight of 3-shank ripper 1667 kg
Maximum lift above ground 592 mm
We are specialized in selling used machinery such as excavators, wheel loaders, road rollers, caterpillar, dozer, graders, automobile hoists and so on.The used construction machinery we sell include komatsu, kato, tadano, isuzu, mitsabishi, kawasaki, hitachi, cat, daewoo, hyundai, kobelco, xcmg and etc.All used machinery is purchased in our country or imported from japan, so we can provide the best quality machinery but competitive price.We have exported our machinery to russia, middle east, america, africa, western europe, south asia, and gained high reputation from our clients.
