We bring to our esteemed clients a range of innovative Sheet, Plates & Coils that have been developed to meet the requirements of the changing trends. These efficient Sheet, Plates & Coils are used in a various mechanical and general engineering industries.
1518 Anodes Of 88 Kg Each With A Total Of 121.5 Tons. Approx. Value Usd917.05
Ex Work Mine.
Skills Requirement Anodes:
Technical Description:
1. The Surface Of The Anode Plate Is A Lead-based Alloy Rolled Plate, And The Composition Of The Lead Alloy Plate: Sn: 0.8â?¡0.02%,
Ca: 0.08-0.1%;
2. Lead Raw Materials Used In Lead Alloys Are Pb 99.99 Lead Ingots Specified In Gb/t 469: The Chemical Composition Of Copper Conductive Beams Is T2 Red Copper Specified In Gb5231;
3. The Quality Of Lead Alloy Plate Refers To Ys/t 498-2006, The Surface Is Smooth, Clean And Flat, No Cracks, Layers And Slag Inclusions Are Allowed;
4. The Thickness Of The Lead-coated Layer Is Uniform And Tightly Bonded With The Copper Rod, The Surface Is Smooth Without Flash, Burr, Pores And Inclusions, And The Surface Has No Deep Scratches;
5. The Welding Seam Is Welded By The Reverse Button Method (the Plate And The Beam Have Dovetail Grooves) To Ensure The Welding Seam Of The Beam And The Plate Is Firm.
We are engaged in making Lead available in several forms including
LME registered and non registered 99.97% and 99.99% as well as
secondary ingots, foil, granules, powder, rod, shot, sheet, and wire.
Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a
relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes
upon exposure to air. Alloys include pewter and solder.
