Supplier : Calcium aluminate cement, high alumina cement, al2o3 micro powder, refractory castable, high alumina fine powder, csa expansive agent for building products and leakage stopper, corundum series, such as brown fused alumina, white fused alumina, vice-white corundum, fused magnesium aluminum spinel, fused mullite, zirconia fused alumina, compact fused alumina, black fused alumina
According to different requirements, five series of products have been formed, including dry pressing, hot die casting, refractory, casting and setting, structural ceramic granulator, etc. It can be widely used in electronic equipment, structural ceramics, refractories, wear-resistant materials, polishing materials and other industries.
Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released.
Specificatin:
grade chemical cmpsitin % Physical character
F Al N2 Fe2342- P25 LI Bulk dity g/cm3
AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5
AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3
AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7
AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7
Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc.
Brief Intrductin f the Prductin Technics
In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water.
Packaging
packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.
Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively.
Specifications:
Appearance white powder
F 52% min
Al 12% min
Na 33% max
SiO2 0.36% max
Fe2O3 0.08% max
CaO 0.5% max
P2O5 0.03% max
SO4 0.6% max
H2O 0.4% max
Loss on ignition 2 % max
Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels.
Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
Product Name:Aluminum sulfate
Molecular Formula:AL2(SO4)3
Hs Code:2833220000
CAS Code:10043-01-3
Standard:HG2225-2010
Shape:flake, powder, 2-4cm lump and 2-5mm/3-8mm granular
Properties:There are two types,anhydrous aluminium sulphate and aluminium sulphate octadecahydrate. In normal condition , it is AL2(SO4)3�·18H2O; AL2(SO4)3�·14H2O after efflorescence, can be white powder , glittering flaky or crystalline flakes, odorless, sweet to slight bitter.
Use:Sewage Treatment, treatment of drinking water, Sizing of paper , Cement Additive.
Specifications
Item name Standard
AL2O3 15.6% 16.5% 17%
Fe2O3 0.5 % Â 0.005 % 0.004%
PH value 3.0 3.0 3.0
Water insoluble matter 0.2% 0.04% 0.03%
Packing 25kg or 50kg or 1000kg in plastic lined woven bag
Shape:flake, powder, 2-4cm lump and 2-5mm/3-8mm granular
Properties:There are two types,anhydrous aluminium sulphate and aluminium sulphate octadecahydrate. In normal condition , it is AL2(SO4)3 18H2O; AL2(SO4)3 14H2O after efflorescence, can be white powder , glittering flaky or crystalline flakes, odorless, sweet to slight bitter.
Use:Sewage Treatment, treatment of drinking water, Sizing of paper , Cement Additive.
Specifications
Item Name Standard
AL2O3 15.6% 16.5% 17%
Fe2O3 ¤0.5 % 0.005 % 0.004%
PH value .0 3.0 3.0
Water insoluble matter 0.2% 0.04% 0.03%
Packing 25kg or 50kg or 1000kg in plastic lined woven bag
Solid type: white powder or granules, hygroscopic, readily soluble in water. The aqueous solution may absorb CO2 and form aluminum hydroxide precipitate. Addition of NaOH is required to increase stability.
Liquid type: transparent slurry, stable during storage life. Prolonged stay of diluted aqueous solution may cause aluminum hydroxide precipitate.
Use:
In the construction process, it can be used as leaking stoppage agent combined with the sodium silicate.
In paper-making, this product can mix with aluminum sulfate to be a good filling agent.
In water treatment, it can be used as additive of purifier.
1,Name: Sodium nitrite
Molecular formula: NaNO2
Formula weght:69.00
2Property: (1) ordinary sodium nitrite: white little crystals or light yellow
 (2) dry powder sodium nitrate: white crystal,non-caking, showing loose status.
Density:2.168. No odor, slightly salty. It is liable to deliquesce, dissolved in water,soluble in liquid ammonia,slightly soluble in ethanol and glycerin,Melting Point:271. Decomposition temperature is 320. It has oxidability and also has reducibility. It will slowly be oxidized into sodium nitrate in atmosphere, it can form nitrogen compound with nitrilo at low temperatures.
3Usage:It has been widely used in making nitro-compound and azo dye, mordant of textile dyeing, bleaching agent, metal heat finishing agent, cement early strength agent, and deicing agent etc.
Note: The product should be stored in a cool, dry place to prevent it from moisture, heat and sunlight. This product can not be mixed with strong reductant, inflammable and explosive materials, food, feed and additives. â?¢ This product is toxic and should be properly kept and can not be eaten.
4 Specification: (Technical Standards:GB2367-2006)
Item Unit Molten salt G High G First G Qualified G Dry powder G
Assay % 99.3 99.0 98.5 98.0 98.5
Sodium nitrate % 0.6 0.80 1.00 1.90 0.80
Chlorides % 0.03 0.10 0.17 -- 0.1
Water insolubles % 0.02 0.05 0.06 0.10 0.06
Moisture % 1.0 1.4 2.0 2.5 0.2
Loose degree -- -- -- -- 95
5,Package: net 50kg net each in plasic woven inner plasic bag, or according to customers requirement.
Product Features
The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 21% of the products, their biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity.
Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction.
coarse particles MDCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product produced by micro-particles MDCP form, without any chemical binder.
Specifications
Appearance white powder or granule
Phosphate  21% min
Calcium     15% min
Fluorine    0.18% max
Arsenic    30ppm max
Pb   30ppm max
Source of OriginRock
Packing and Storage
Knitted bags lined polyethylene plastic bags
double packaging, Weighing 25Kg.
Transportation-and harsh rain.
Stored in a cool, ventilated, dry place.
Commodity: Dicalcium phosphate Feed Grade
Use
DCP is the feed preparation of raw materials, Animal right to supplement calcium needs. Coarse its products more applicable to the preparation hens, ducks feed, concentrate feed and premix.
Product Nature
Molecular Formula:CaHPO4·2H2O,Molecular weight:172.09,After drying with loose white powdery crystals or granules. Neutral products, the melting acid, water-soluble, hygroscopicity small, heated to 90 around gradually lose water of crystallization.
Product Features
The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 18% of the products, due to a small amount of MCP, and its biological effects better.
This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG26362000
Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction.
Coarse particle DCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product of Micro-particle DCP granulation from mechanical, without any chemical binder.
Specifications
Appearance white and gray powder/granule
Total P 18% min
Calcium 21% minÂ
F 0.18% max
As 30 ppm max
Pb 30 ppm max
Packing and Storage
Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
