Calcium Silicate compound is obtained by reaction of Silica & Calcium oxide. This compound is commonly used to insulate high temperature Pipe, equipment & for fire endurance application.
Calcium Silicate have high compressive strength, resistance to damage from tumbling, ability to maintain its properties without loss of insulating efficiency, are rigid, reusable, light in weight and have long life.
Refractory Burner Blocks are special type of Block which are form of Refractory ceramic material. It is used for Boiler, furnace, kiln, fireplaces & fireboxes.
Quality:
We offer various quality Burner Block are IS-6, IS-8, PI - 30% to 70% Alumina offering high temperature resistance of 1100 C to 1700 C & Special brick as per require technical data considering to application of Brick.
Sizes of Burner Block (Inch):
9 x 9 x 9
12 x 12 x 12
14 x 14 x 14
16 x 16 x 16
Fusion AAC Blocks (Autoclaved Aerated Concrete) is a certified green building material. These blocks are light weight, load-bearing, high-insulating, durable building product produced in a wide range of sizes and strengths. The raw materials used to manufacture these blocks are cement, fly ash, gypsum, lime and water. Fusion AAC blocks manufacturing involves hardening through steam-curing in autoclaves creating calcium silicates, making them stronger.
These blocks are manufactured in a variety of sizes. These precast concrete blocks are widely used for internal and external wall construction. Fusion blocks are easy to install, nail, drill and cut for pipes and conduits. Most of the volume of an Fusion AAC block is air making them light weight thermally insulative/fire resistant with good acoustic properties.
Fusion Jointing Mortar is an AAC Blocks Jointing adhesive that gives excellent bonding between two blocks. It is also suitable for the bonding of many other construction materials such as tiles, hollow bricks and other kinds of fly ash bricks in the interior or exterior applications. The mortar is specially designed to provide higher bonding resulting in higher tensile adhesion strength.
Properties
Base : Cement modified with polymer additives
Density: 2.0 g/cm3
Water Demand: 20 �¢?? 21%
Tensile adhesion Strength: 1.0 N/mm
Self-Curing: Yes
Color : Grey
Package : 40 kg per bag
Area of Application
Fusion Jointing mortar construction easier and faster.
It can be used jointing all AAC blocks, Hallow bricks, and Cement bricks.
Parapet walls and jointing of cement windows and doors.
Jointing of panels and pre-stressed concrete slabs.
Boundaries and garden walls.
MEMFILL's Hollow Fiber Membrane Technology puts into use for providing safe-drinking water for better today.
MEMFILL offers 3 different products in this category:
1. Classic UF filter (20 LPH) for Residential Use
2. UFinRO UF Filter (40 LPH) for small Commercial Use
3. Jumbo UF Filter (500 - 800 LPH) for big Commercial Use
--------------------------------------------------------------------------------------------------------------------------------------------
Salient Features
- Durable Indigenous Hollow Fibers
- High Flux up to 1000 lph
- Filters Suspended Solids, Virus & E-coli
- Customizable Design
- Easy to Install & Replace
- Easy to do Backwash
- Very Low Maintenance
VFLOOR2 are two component waterproof Self Leveling Mortar. Once cured, it provides a smooth, level surface on which to install a variety of floor coverings. Suitable for prepairing interior floors prior to laying parquet, vinyl sheet and tile, soft floor covering, natural stone, ceramic tiles, etcâ?¦
It can be used on a wide range of absorbent and non-absorbent floor surfaces including concrete, cement and sand screeds, terrazzo, asphalt, ceramic & quarry tiles.
Layer-thickness 2-10mm
Can be pumped
Product name: Self leveling concrete without primer VFLOOR2
Compressive strength: >35 Mpa, 28 days later
Flexural strength: >7 Mpa, 28 days later
Application
Temperature: 5-30 degree
Mixing ratio: 20kgs powder + 5kgs Liquid
Feature & Benefits:
- Two component, just mix A+B
- Waterproofing
- Good adhesion to primed substrates
- Good flow, self smoothing
- Rapid setting and early strength
- Easy and quick to lay
Mixing:
Convenient easy mix ratio A:B = 4:1 by mass. Mix slowly and continuously to form a homogeneous mixture.
The mixed materials is immediately ready to use and should be used within 30-40 minutes after mixing.
Ready for foot traffic after approx. 24 hours.
Drying time:
Prevent draughts across the floor to avoid localized premature drying
At ambient temperature, VFLOOR2 will appear to be dry after approximately 24 hours, ready for foot traffic after approx. 24 hours.
Floor laying may commence after 48 hours.
Coverage:
At an application thickness of 2mm the coverage will be approx. 5kgs per 1m2
Shelf Life: 9 months.
Product specifications/features
We have eps block scraps, they are all white colors and compacted in
Blocks.We offer good quality eps block scrap. Please contact us for more
Details.Compressed to 44k lbs per 40' container.
Standard density ranges per cubic foot
