Our bitumen is produced by refineries in Kazakhstan, Azerbaijan, Poland, and the Middle East and is available for sale CIF at the best prices. Alternative TTO, TTV, and STS deliveries. Buyer-friendly procedures. Buyer's mandate welcome
60/70 CIF $130 Gross
85/100 CIF $130 Gross
Bitumen 60/70 Test method Unit Specification
Specific gravity @ 25°C ASTM D70 Kg/cm3 1.01/1.06
Penetration @ 25°C ASTM D5 mm/10 60/70
Softening point °C ASTM D36 °C 49/56
Ductility @25 °C ASTM D113 cm 100 min
Loss on heating(wt) % ASTM D6 wt % 0.2 max
Drop in penetration after heating % ASTM D5-D6 % 20 max
Flashpoint °C ASTM D92 °C 232 min
Solubility in Trichloroethylene ASTM D2042 wt % 99 min
Spot test A.A.S.H.O.T102 Negative
Bitumen Penetration Grade 80/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by ASI GLOBAL TRADE is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by ASI GLOBAL TRADE is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumens are specified by the penetration and softening point test. Designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.
SPECIFICATIONS :
CHARACTERISTIC TEST METHOD UNIT MIN. MAX.
Specific gravity at 25°C ASTM D70 °C 1.01 1.05
Penetration at 25°C ASTM D5 mm 80 100
Softening Point ASTM D36 °C 42 52
Ductility at 25°C ASTM D113 Cm 100 -
Loss on heating ASTM D6 % 0,5
Flash Point ASTM D92 °C 225
Solubility in Trychloroethyelene ASTM D2042 % 99
Performance after RTFOT Method Test to ASTN D1754:
- Change in mass (m/m) ASTM2872 % - 0.5
- Retained Penetration 25°C, 100g, 5s (% of original) ASTM D5 % 50 -
- Increase in softening point ASTM D36 °C - â?¤8
- Softening point after hardening ASTM D36 °C 45 -
LEGAL NOTES
The information, and, in particular, the recommendations relating to the application and end-use of ASI GLOBAL TRADE products, are given in good faith based on ASI GLOBAL TRADE current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with ASI GLOBL TRADE recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchant-ability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. ASI GLOBAL TRADE reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Bitumen a black viscous mixture of hydrocarbons obtained naturally or as a residue from petroleum distillation. It is used for road surfacing and roofing. Bitumen is a mixture of Organic Liquids that are highly Viscous, Black, Sticky, Entirely Soluble in Carbon Disulfide, and composed primarily of highly condensed Polycyclic Aromatic Hydrocarbons. Naturally occurring or crude bitumen is a sticky, tar-like form of petroleum which is so thick and heavy that it must be heated or diluted before it will flow. At room temperature, it is much like cold molasses. Refined Bitumen is the residual (bottom) fraction obtained by fractional distillation of crude oil. It is the heaviest fraction and the one with the highest boiling point, boiling at 525 C (977 F).
Petroalliance are involved in import and the supply and trade of Bitumen Oil. This oil is a dark and viscous liquid which is sticky in texture. It is widely used in road construction, waterproofing, paints, enamels etc. It is available to clients in different types of settings at highly affordable prices. It is widely acclaimed amongst our client base for its supreme quality.
Uses of Bitumens
Bitumen is primarily used for construction and paving of roads. Its other uses are for Bituminous Waterproofing Products, including the use of bitumen in the production of roofing felt and for sealing flat roofs.
Penetration Bitumen 60/70 serves as a vital component in road construction projects. It is specifically engineered for optimal performance in such applications. It is imperative to adhere to the recommended usage guidelines and consult with the supplier before considering alternative applications. The properties and specifications of Bitumen 60/70 are rigorously tested to ensure compliance with industry standards and project requirements.
Bitumen 60/70 is a high-quality asphalt grade known for its excellent stability and durability in road construction. With optimal viscosity, it is ideal for producing strong, long-lasting pavements that can withstand heavy traffic loads and diverse environmental conditions.
Bitumen Grade 60/70 is a high-quality, semi-solid petroleum product derived from the distillation of crude oil. Known for its excellent adhesive and waterproofing properties, this grade of bitumen is primarily used in the construction and maintenance of roads, runways, and other infrastructure projects. It is particularly well-suited for hot climates due to its optimal softening point and penetration range, which ensures long-lasting performance even under high temperatures.
Key Features:
Penetration Grade: 60/70, offering a perfect balance between hardness and softness, making it ideal for road construction.
Softening Point: Ensures stability under high-temperature conditions, reducing the risk of road deformation.
Adhesive Properties: Excellent adhesion to aggregates, providing strong and durable road surfaces.
Waterproofing: Superior water resistance, protecting the pavement from water damage and extending the lifespan of roads.
Durability: High resistance to aging and weathering, ensuring prolonged service life of the infrastructure.
Applications:
Road Construction: Ideal for the construction of high-traffic roads, highways, and expressways.
Airport Runways: Ensures smooth and durable surfaces for airport runways, capable of withstanding heavy loads.
Paving: Suitable for various paving applications, including urban roads, rural roads, and parking lots.
Waterproofing: Used in waterproofing membranes and roofing applications, providing excellent protection against moisture.
Specifications:
Penetration at 25 C: 60-70 dmm
Softening Point: 49-56 C
Flash Point: Minimum 232 C
Ductility at 25 C: Minimum 100 cm
Solubility in Trichloroethylene: Minimum 99.0%
Specific Gravity: 1.01-1.06
Packaging: Available in drums, bulk containers, or as per customer requirements.
Compliance: Bitumen Grade 60/70 meets international standards and specifications, ensuring consistent quality and performance across all applications.
Why Choose Bitumen Grade 60/70?
Proven Performance: Trusted by engineers and construction professionals worldwide for its reliability and durability.
Versatile Applications: Suitable for a wide range of paving and waterproofing projects.
High Quality: Manufactured under stringent quality control measures to meet global standards.
