I Can Supply EN950 10 PPM (ULSD 10 PPM)
ORIGIN : RUSSIAN OR NON RUSSIAN
TRIAL QUANTIITY : 100,000 MT
TERM SHIPPMENT : CIF & FOB (ROTTERDAM & HOUSTON)
TERM PAYMENT : DLC700 OR SBLC760 OR MT103/72 AS PAYMENT GUARANTEE + MT103 TT 100%
European standard diesel fuel suitable for automotive and industrial applications with controlled sulfur content.
Specifications
Specification: 10PPM, 500PPM
MOQ: 20,000 - 50,000 MT/Month
Technical Details:
Cetane Number: 51 min
Sulfur Content: 10 or 500 ppm max
Density at 15C: 820-845 kg/m
Flash Point: 55 C min
Trading Details
Origin: Republic of Kazakhstan
Incoterms: CIF/FOB
Loading Ports: Port of Aktau, Rotterdam, Houston, etc.
Payment Guarantee: SBLC, DLC
Payment Terms: MT103 or TT
Performance Bond: 2% PB
Contract Term: 12 months minimum (with rolls and extensions)
Inspection: SGS, CIQ or similar
product Description : These Products are Exported with Stringent Adherence to Standard Russian Export Specifications with Respective GOST. Price of product ( USD price or FOB price) : Product will be priced in USD$ Based on an Appropriate PLATTS INDEX or a FIXED Price and the Agreed Upon Shipping Method. The Price will be Mutually Agreed to by Buyer and Seller Product origin : Russian Federation Key Specifications/Delivery/Logistics : 1. Certification SGC or Equivalent 2. Payment Terms = Letter of Credit ( Details to be agreed upon by Buyer and Seller 3. Delivery Time = Varies by Destination 4. Port of Loading = TBD Minimum Order Size & Contract Term : Minimum Monthly Quantity = 100,000 MT X 12 Month Contract Required with R & E up to 120 Months
D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators.
D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names.
Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400
Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil.
The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol.
D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.
SPECIFICATION of ULSD 10 ppm Diesel Fuel (EN590)
Density at 15 0C Kg.m3 820-845
Polycyclic aromatic hydrocarbons EN 12916 wt% B Max
Flash Point EN 2719 0C >55
Cold Filter Plugging Point CFPP EN 116 0C
Winter Grade -15 Max
Summer Grade 5 Max
Distillation EN ISO 3405
Recovered at 250C Vol% 65 Max
Recovered at 350C Vol%95% (Vol/Vol)
Recovered at 0C 360 Max 85 Min
Sulphur EN ISO 20846
EN ISO 20884 Mg/kg 10 Max
Carbon Residue (on 10%residue) EN ISO 10370 wt% 0.30 Max
Viscosity at 40C EN ISO 3104 Cst 2.0-4.5
Copper Strip Corrosion (3h a5 50C) EN ISO 2160
Fatty acid methyl ester(FAME) content EN 14078 Vol% 7.0 Max
Cetane Number EN ISO 5161 EN 15195 51 Min
Cetane Index EN ISO 4264 Calculated 46 Min
Water EN ISO 12937 Mg/kg 200 Max
Particulate Matter EN 12662 Mg/kg 24 Max
Oxidation Stability EN ISO 12205
EN 15751 G/m3 H 25 20 Max Min
Lubricity (wsd1,4) at 60C EN ISO 12156/1 Um 450 Max
Quantity: Minimum 25.000 MT - Maximum 100.000 MT
Origin: Kazakstan
Loading Port: Gorgia Batumi
Payments (SBLC or BG) via MT-760 unconditional, cashed
back from top 25-30 world banks with sellers acceptable verbiage.
(EN590) 10 PPM/50PPM
Origin: Kazakhstan
The detailed specification: Meets all International Standards
Total Spot quantity order: 100,000MT
The price and discount:
- FOB ROTTERDAM AND CIF OTHER COUNTRY: DISCOUNT $50 PER MT
FROM NWE PLATTS
- CIF ASIA: DISCOUNT $70 PER MT FROM SINGAPORE PLATTS
Shipment:
- TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per
conditions in Seller`s FCO
Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via
MT103
Payment Procedure: According to the terms of the contract, to be mutually agreed upon
by Buyer & Seller.
Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST
