Rated Power : 30KW
Shaft Power : 34.5KW
Rated Wind Speed : 10m/s
Cut-in Wind speed : 3m/s
Cut-out Wind speed : 25m/s
Max Cp : 0.48
Rotor Diameter : 12m
Blade Length : 5.58m
Tip Chord : 230mm
Max Chord : 783mm
Material : FRP
Weight(Kg/pcs) : 112
Direction : Clockwise
Orientation : Upwind
Configuration : Horizontal
Survival Speed : 52.5m/s
Standard : AWEA/IEC
Design Life : 20years
Bolt Circle Dia : 248mm
Rated Power : 50KW
Shaft Power : 55KW
Rated Wind Speed : 10.5m/s
Cut-in Wind speed : 3m/s
Cut-out Wind speed : 25m/s
Max Cp : 0.45.
Rotor Diameter : 15.2m
Blade Length : 7.2m
Tip Chord : 289mm
Max Chord : 979mm
Material : FRP
Weight(Kg/pcs) : 208.
Direction : Clockwise
Orientation : Upwind
Configuration : Horizontal
Survival Speed : 52.5m/s
Standard : AWEA/IEC
Design Life : 20years
Bolt Circle Dia : 434mm.
Rated Power : 100KW
Shaft Power : 120KW
Rated Wind Speed : 12m/s
Cut-in Wind speed : 3m/s
Cut-out Wind speed : 25m/s
Max Cp : 0.43
Rotor Diameter : 19.1m
Blade Length : 9.2m
Tip Chord : 120mm
Max Chord : 1070mm
Material : FRP
Weight(Kg/pcs) : 278
Direction : Clockwise
Orientation : Upwind
Configuration : Horizontal
Survival Speed : 52.5m/s
Standard : AWEA/IEC
Design Life : 20years
Bolt Circle Dia : 360mm.
This blender series have the characteristics of universal round plate turbine blender.The difference is the change of the leave's section shape,as to increase the pump transferring capability of the blender,improve the performance of dispersion and media.The operation condition is the same with the universal round plate turbine blender.
Flow state:The flat blade impeller and curved blade impeller are radial flow.When there is baffle,the upper and down circulating flows can be formed from the blade boundary.The opposite pitched subsidiary blade impeller has an axial shunt.The capacity mixing of liquid above and below the disc is worse than the open turbine impeller.
Aeolos-h 50kw wind turbine used directive drive generator, no gearbox, more efficient and reliable. The wind turbine blades design has the largest swept area in 50kw wind turbines. The unique blades design could make the wind generator producing power in a low wind speed.
Aeolos-h 50kw wind turbine provides grid-on and grid off wind power generation solutions to the customers. Aeolos 50kw wind turbines were applied in small wind farm, college, hospital and other new energy projects. Aeolos-h 50kw wind generator has a good performance on roi which is about 5-7 years in different areas. It is a good investment project in the rich wind source area, like italy, greece, spain, uk, france, australia, german and usa.
Aeolos wind turbine 50kw specification
Rated power 50 kw
Maximum output power 54 kw
Output voltage 380-500 v
Blade quantity 3 glass fiber blades
Rotor blade diameter 18.0 m (59.1 ft)
Start-up wind speed 3.0 m/s (6.7 mph)
Rated wind speed 10 m/s (22.3 mph)
Survival wind speed 45 m/s (100.7 mph)
Generator three phase permanent magnetic generator
Generator efficiency >0.85
Turbine weight 3120 kg (6878.3 lbs)
Noise 48.5 db(a) 5m/s
Temperature range -20ípc to +50ípc
Design lifetime 30 years
Warranty standard 5 years extended 10 years
