Supplier : magniplast high coverage machinable plaster substantially reducing labour, time
magnisilk silky finish putty eliminating use of primer and increasing paint coverage by 25%
magniseal water proofing (grey & white) capable of withstanding water pressure up to 7.0 bar
magnifix tile adhesive (grey/white) having highest coverage and pull off adhesion strength of 2.0 n/mm2
magnijoint thin joint mortar for blocks having highest coverage and splitting tensile strength of 1.0 n/mm2
magnigrout normal / flowable grout with highest 1 day compressive strength of 40 45 n/mm2
Services : Established: 2019
Standards: ISO CERTIFICATION, AND OTHER AS REQUIRED FOR COMPLIANCES
Verification Status
Contact Details:
B 403 Satyam Rajyog Society Behind Ct Hospotial, Dhanori
Pune
411015
Maharastra
India
Destination:
Jebel Ali, Dubai, United Arab Emirates
Looking for suppliers from:
Worldwide
Product Description
Buyer is interested to receive quotations for the following RFQ -
Product Name : Microfine Cement
Specifications:
Microfine Cement is a Portland cement based grouting material composed of microfine particles with a specific surface area of More than 800m /kg and special additives. As a grout, it has excellent permeability, strength and durability properties.
Applications
Concrete Crack Injection
Rock Injection: Tunnels, Caverns Etc., As Pre- Or Post-stabilization Injection. Fixation And Water Scaling In Fractured Zone During Tunnel Construction. Water Sealing Of Tunnel Walls.
Soil Injection: Preventing Soil Liquefaction Stabilization, Water Tightness, Etc.
Underground Oil Storage Facilities: Ensuring Leak Tightness Of Retention Dikes Around Oil Tank.
Curtain Grouting For Dams And Embankments
Basic Physical Properties And Strength
Fineness ? Blaine (m2 /kg)
800-1000 (up To 2400)
Compressive Strength At 28 Day (n/mm2)* More Than 25
Setting Time (min)*
Starting Not Earlier Than 40
Finishing Not Later Than500
At Water To Cement Ratio 0.4
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CFR
Destination Port : Jebel Ali, Dubai, United Arab Emirates
Please provide a quotation to the following requirement from importer -
Product Name : Microfine Cement
Specifications:
Microfine Cement is a Portland cement based grouting material composed of microfine particles with a specific surface area of More than 800m/kg and special additives. As a grout, it has excellent permeability, strength and durability properties.
Applications
Concrete Crack Injection
Rock Injection: Tunnels, Caverns Etc., As Pre- Or Post-stabilization Injection. Fixation And Water Scaling In Fractured Zone During Tunnel Construction. Water Sealing Of Tunnel Walls.
Soil Injection: Preventing Soil Liquefaction Stabilization, Water Tightness, Etc.
Underground Oil Storage Facilities: Ensuring Leak Tightness Of Retention Dikes Around Oil Tank.
Curtain Grouting For Dams And Embankments
Basic Physical Properties And Strength
Fineness ? Blaine (m2 /kg)
800-1000 (up To 2400)
Compressive Strength At 28 Day (n/mm2)* More Than 25
Setting Time (min)*
Starting Not Earlier Than 40
Finishing Not Later Than500
At Water To Cement Ratio 0.4
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CFR
Destination Port : Jebel Ali Port, United Arab Emirates
Buyer is interested to receive quotations for the following RFQ -
Product Name: Fluoroplastic Products
Specifications:
Fluoroplastic Products And Their Properties
Fluoroplastic. Fluoroplastic Products
Fluoroplastic is a synthetic polymer that contains fluorine and is white. It is used in many industries due to its unique properties. Fluoroplastic is also called Teflon, polytetrafluoroethylene, fluoroplastic-4, PTFE, fluoropolymer.
The first to discover Teflon was the American scientist Roy Plunkett in 1938 - he observed the polymerization of gaseous tetrafluoroethylene, its transformation into a solid substance (resembling paraffin). This material has distinctive properties and was immediately sent for patenting.
In the USSR, Teflon appeared during the Second World War in the production of tanks that were sent from America under Lend-Lease. Soviet designers were impressed by the design of the tank turret - its rotation was carried out not with the help of grease, but with a fluoroplastic gasket .
Technical characteristics of fluoroplastic F 4
Some chemical and physical properties of fluoroplastic have made the material popular: its technical characteristics surpass those of other similar materials:
high dielectric characteristics and resistance to electric arc;
high electrical strength;
resistance to chemicals;
low water absorption rates;
low coefficient of friction;
low level of adhesion;
biological inertness;
the ability to retain its properties in a temperature range."
Please provide a quotation to the following requirement from importer -
Product Name: Waterproof Tarpaulin
Specifications :
Size: 6.1 M (20 FT) WD X 12.2 M (40 FT)
Item : 1
Qty : 8 Each
Tarpaulin Waterproof
Type: Size 6.1 M (20 FT) WD X 12.2 M (40 FT) LG;
Plastic, White;21.3 KG (47 LB) PER 92.9 M2 (1000 SQ FT);
Opaque Finish, Exceeds 90.7 KG (200 LB)
In Tensile Strength; Exceeds 31 KN/M2 (650 LB/SQ FT)
Tear Strength; Exceeds 7 X 7
Filaments/in; Ultra-violet Stable
Item : 2
Qty : 5 Each
Tarpaulin Waterproof
Type: size 6.1 M (20 FT) WD X 12.2 M (40 FT) LG
Plastic;white;21.3 KG (47 LB) PER 92.9 M2 (1000 SQ FT)
Opaque Finish;exceeds 90.7 KG (200 LB)
In Tensile Strength; Exceeds 31 KN/M2 (650 LB/SQ FT)
Tear Strength; Exceeds 7 X 7
Filaments/in; Ultra-violet Stable
Item : 3
Qty : 5 Each
Tarpaulin Waterproof
Type : Size 6.1 M (20 FT) WD X 12.2 M (40 FT) LG
Plastic;white;21.3 KG (47 LB) PER 92.9 M2 (1000 SQ FT)
Opaque Finish;exceeds 90.7 KG (200 LB)
In Tensile Strength; Exceeds 31 KN/M2 (650 LB/SQ FT)
Tear Strength; Exceeds 7 X 7
Filaments/in; Ultra-violet Stable
Item : 4
Qty : 10 Each
Tarpaulin Waterproof
Type: Size 12.2 M (40 FT) WD X 30.5 M (100 FT) LG
Plastic;white;21.3 KG (47 LB) PER 92.9 M2 (1000 SQ FT)
Opaque Finish;exceeds 90.7 KG (200 LB)
In Tensile Strength; Exceeds 31 KN/M2 (650 LB/SQ FT)
Tear Strength; Exceeds 7 X 7
Filaments/in; Ultra-violet Stable
Item : 5
Qty : 10 Each
Tarpaulin Waterproof
Type : Size 6.1 M (20 FT) WD X 12.2 M (40 FT) LG
Plastic;white;21.3 KG (47 LB) PER 92.9 M2 (1000 SQ FT)
Opaque Finish;exceeds 90.7 KG (200 LB)
In Tensile Strength; Exceeds 31 KN/M2 (650 LB/SQ FT)
Tear Strength; Exceeds 7 X 7
Filaments/in; Ultra-violet Stable
Item : 6
Qty : 10 Each
Tarpaulin Waterproof
Rotproof & Flame Resistant
Type : Size 6.1 M (20 FT) WD X 9.1 M (30 FT) LG
No 9 Cotton Duck
White Not To Be Used Around Welding Or Burning Areas
Item : 7
Qty : 5 Each
Tarpaulin Waterproof
Type;size 12.2 M (40 FT) WD X 30.5 M (100 FT) LG
Plastic;white;21.3 KG (47 LB) PER 92.9 M2 (1000 SQ FT)
Opaque Finish;exceeds 90.7 KG (200 LB)
In Tensile Strength; Exceeds 31 KN/M2 (650 LB/SQ FT)
Tear Strength; Exceeds 7 X 7
Filaments/in; Ultra-violet Stable
Item : 8
Qty : 5 Each
Tarpaulin Waterproof
Type;size 6.1 M (20 FT) WD X 12.2 M (40 FT) LG
Plastic;white;21.3 KG (47 LB) PER 92.9 M2 (1000 SQ FT)
Opaque Finish;exceeds 90.7 KG (200 LB)
In Tensile Strength; Exceeds 31 KN/M2 (650 LB/SQ FT)
Tear Strength; Exceeds 7 X 7
Filaments/in; Ultra-violet Stable
Item : 9
Qty : 20 Each
Tarpaulin Water Proof
Type;size 6.1 M (20 FT) WD X 12.2 M (40 FT) LG
Plastic;white;21.3 KG (47 LB) PER 92.9 M2 (1000 SQ FT)
Opaque Finish;exceeds 90.7 KG (200 LB)
In Tensile Strength; Exceeds 31 KN/M2 (650 LB/SQ FT)
Tear Strength; Exceeds 7 X 7
Filaments/in; Ultra-violet Stable
Item : 10
Qty : 3 Each
Tarpaulin Waterproof
Type;size 6.1 M (20 FT) WD X 12.2 M (40 FT) LG
Plastic;white;21.3 KG (47 LB) PER 92.9 M2 (1000 SQ FT)
Opaque Finish;exceeds 90.7 KG (200 LB)
In Tensile Strength; Exceeds 31 KN/M2 (650 LB/SQ FT)
Tear Strength; Exceeds 7 X 7
Filaments/in; Ultra-violet Stable
Item : 11
Qty : 3 Each
Tarpaulin Waterproof
Type;size 12.2 M (40 FT) WD X 30.5 M (100 FT) LG
Plastic;white;21.3 KG (47 LB) PER 92.9 M2 (1000 SQ FT)
Opaque Finish;exceeds 90.7 KG (200 LB)
In Tensile Strength; Exceeds 31 KN/M2 (650 LB/SQ FT)
Tear Strength; Exceeds 7 X 7
Filaments/in; Ultra-violet Stable
Specifications:
Black Closed Cell NBR/PVC 25/50 smoke/flame rated insulation with 2.7mil scrim reinforced acrylic adhesive one side, white plastic release liner
Size: 3/16” thick x 1” width x 50’ long
Packing: 50’ Per Roll; 20 Rolls Per Box
Quantity: 9000 Rolls (Also re-confirm if this Full Container Load (20’)
Highest working temperature:+105?
Density range: 45~65 kg/m3
Heat conductivity: 0.035W/m.k at 0
Please quote for the following wholesale product requirement -
Product Name: Hexene Copolymer Resin
Specifications :
Formolene DMP1810B
Metallocene Linear Low-Density Polyethylene (mLLDPE) Resin for Film Extrusion
Applications
Formolene® DMP1810B Is A Metallocene 1-hexene Copolymer Resin Engineered For Blown Film
Applications. Films Made From This Resin Have Outstanding Tensile, Impact Strength And Puncture. These
Superior Strength Properties And Excellent Drawability Enable Dmp1810b For Downgauging In Bag
applications. DMP1810B is a barefoot grade resin, but does contain a PFAS free PPA for enhanced processing
Suggested Applications:
Agricultural Film Bag In Box Barrier Food Packaging
Blown Film Blown Stretch Film Bread Bags
Food Packaging Form Fill And Seal Packaging Freezer Film
General Packaging Heavy Duty Bags Industrial Packaging
Lamination Film Multilayer Packaging Film Overwrap Film
Premium Trash Bags Stand Up Pouches Trash Bags
Trash Can Liners
Nominal Values
Property
ASTM TEST
Method
English
Unit Value
Si
Unit Value
Base Density Internal Method G/cm3 0.918 G/cm3 0.918
Melt Index (190 ?c, 2.16 Kg) D1238 G/10 Min 1.0 G/10 Min 1.0
Tensile Strength At Yield D882 Psi 1260/1280* Mpa 8.7/8.8*
Tensile Strength At Break D882 Psi 8700/8700* Mpa 60/60*
Tensile Elongation D882 % 500/640* % 500/640*
Secant Modulus (1% Sec) D882 Kpsi 25/26 Mpa 170/180
Dart Impact D1709a G 550 G 550
Tear Strength D1922 G 220/370* G 220/370*
Puncture Force Internal Method Lbf 13 N 59
Gloss (45o
) D2457 43 43
Haze D1003 % 16 % 16
Please provide a quotation to the following requirement from importer -
Product Name: Low Pressure Polyethylene Particles
Specification:
White Particles With Odorless, Odorless, And Non-toxic Properties. Melting Point 131 °C
Density 0.910-0.925g/cm3. Softening Point 120-125 °c. Embrittlement Temperature -70 °C.
The Maximum Operating Temperature Is 100 °C
It Has Excellent Heat Resistance, Cold Resistance, Abrasion Resistance, Dielectric Property And Chemical Stability. Almost Insoluble In Any Organic Solvent At Room Temperature. Capable Of Withstanding Corrosion From Various Acid, Alkali, And Salt Solutions. Low Water Absorption And Water Vapor Permeability. Tensile Yield Strength ( Mpa) More Than 23.0 Embrittlement Temperature ( Low-temperature Impact, °c) Less Than -70volume Resistivity (o Cm) 1 × Tendielectric Strength (kv/mm) More Than 35 Dielectric Constant 2.35 Dielectric Loss Angle Tangent Less Than 5 × Ten
Please quote for the following wholesale product requirement -
Product Name: Detachable Container Modules
Specifications:
Sizes: 7.2m X 3.6m, 2.7m Ceiling Height.
9m X 3.6m, 2.7m ceiling height
No walls, windows or doors.
All steel members are to be max thickness you can provide.
Just want complete floor construction, corner blocks and posts, and complete ceiling construction including surrounding beams and joists, ceiling sandwich panels, but no roof materials. Surface to be flat and not ribbed.
Vinyl floor finish to be speckled grey. Frames to be light grey. Ceiling panels matt white (Not high gloss).
Explanation: These 5000 units will be moved around a lot and we feel that sandwich panel walls will move too much (and eventually leak) so we plan to use "caravan" composite walls which are all one piece and so can't move when being dragged onto tray tip trucks and slid off them. Because of the 2.7m ceiling height, we understand delivery of such sized panels will be a problem from India or China and so we will have to have the wall panels manufactured in the USA.
We do not want roof material because the 50mm downpipes which are standard in standard typical modules are too small and so we will have to construct complete conventional very low pitched (1 degree) skillion roofs with gutters along one side on all the modules.
These knocked down +/-5000 modules are to be delivered to Orlando, Florida where they will be assembled and fitted out.
You need to be able to provide structural engineering computations to prove the strength of the perimeter frame of the modules.
Can you provide computations which will be acceptable in the USA?
If not, then we will engage structural engineers in the USA to carry out the work.
If you have any questions, please come back to us immediately.
We are very serious.
Without computations acceptable to local councils, the buildings will not be approved for construction.
In the mean time, I need an indicative price for the +/-5000 modules for the USA very urgently . The final price can be arrived at in the near future but if you want to be considered by the client, you need to respond to us quickly.
