Diesel En590 10-50-500-5000 And Others Ppm Ultra Low Sulphur.
D2 0,2-62 Gost 305-82 Or 0,01 Or 0,05.
D2 Automotive Fuel Oil (ago).
D6 Virgin Fuel Oil.
Hsd Diesel High Speed 500ppm En90.
Diesel En590 Euro4 Gost 52368.
Pms Premium Motor Spirit
Jp54 (ts1) Gost 10227-86.
Jet Fuel A1 Gost 10227-86.
Marine Fuel Oil Cst 180-280-380.
Espo (siberia Pacific Oil) Crude Oil Api 34,7.
Lco (light Cycle Oil).
Mazut Mt100 Gost 10585-75 And 10585-99.
Rebco Gost 51 858-2002/9965-76 Api32/crude Oil 39-1623-93.
Lpg 50/50 Propane/butane - 70/30 P/b.
Lng 5542-87 By Iso Containers Etc.
Gasoline All Types (87-89-92-95).
Bitumen/asphalt All Grades.
Fertilizers Urea, Dap, Etc
Product Description :
Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. ... These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils..
Price of product ( USD price or FOB price) :
20.000 MT monthly market price.
100.000 MT monthly market price Less 5%.
Product origin : Russia and Non Russia
Key Specifications/Special Features :
All types/grades of Fuels, Gas, Oil are available for supply.
Many commercial names for oils, fuels, gases, etc. are used in the market.
To avoid misunderstanding basic details of specifications needed by buyer are mandatory.
Specifications for types/grades of products (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs.
Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.
Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature).
Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine.
The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades:
L - summer, used at ambient temperatures above 0 C;
3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation <-35 C and n <-25 C), or winter, used at temperatures up to -30 C, then the fuel must have a stasis <-45 C and n <-35 C);
- Arctic diesel fuel, the temperature of which is up to -50 C. The sulfur content in diesel fuel of grades L and Z does not exceed 0.2% for type I fuel and 0.5 for type II fuel, and grade A 0.4%
Quantity: 100,000 - 1,000,000 METRIC TON per month. Quality: Complies with European. Standard EN 590. Delivery: CIF ASWP / DIP & PAY. Price CIF : $ 360 Gross / $ 340 Net Per Metric Ton. Price FOB : $ 340 Gross / $ 320 Net Per Metric Ton. For payment of our goods. We use a bank escrow account of the ESKROW type. In order to start cooperation. Please send us a letter of intent ( LOI ). Company profile ( CP ) , to receive a soft corporate offer ( SCO ). We will prepare insurance costs and terms of delivery ( CIF ). We provide security and trust.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS.
EN590 FOB TTV Seller Procedure
Origin : Kazakhstan
Loading port: Singapore port
UNIT PRICE : USD 490/MT
PAYMENT TERMS : MT103
TRANSACTION TERM : FOB
1. Buyer accepts seller working procedure and issue ICPO
2. Seller's issues commercial invoice (CI), Buyer signs and returns back commercial invoice.
3. Seller issue TSR with GPS coordinate to Buyer Company,
4. Buyer contacts the Seller's storage facility for tank extension to enable Buyer approval to gain access to the facility and execute the Quality & Quantity Inspection in Seller Tank Farm for FRESH Analytical Report/Result by SGS. ( Note* One day extension fee is 78,000 usd and will be deduct when buyer is paying total amount )
5. After successful DIP test, (NCNDA/IMFPA) will be signed by all parties.
6. Seller injects product into Buyer's vessel or injects into Buyer's tanks Buyer or buyer take over the storage tanks, within maximum 48 hours Buyer pays via MT 103/TT for the spot transaction and seller issues all export documents to buyer.
7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer.
