We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Pularin:
Foot ball shaped 60 atoms of carbon at edges is layed in pularin.Pularin atoms are arranged in ball.
Each atom is called Bucky balls and tubes are called Bucky tubes or Nano tubes.Each nano tube is 1 to 7 nm diameter i.e 1nm=50000 part of a hair sting.
where?
1)mangampet ,cuddapah dist.Ap,India.app 800 ppm(parts prer million)info given by stanford University.
Cost:
150 times costlier than gold.
10 grams pularin $23000 to $45000
also info given by Bucky-USA website.
Special uses if this becomes common:
1)Pularin coting on aeroplanes withstands from thunders ,rains ,Flashes etc.
2)Bullet proof ackets
3)curing cancer etc.
Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.
Since 2010 we are engaged in trading & exports of ceramic products, very high Quality of Zirconium Silicates & Zirconium Flours for ceramics.
We mostly supply Zirconium 2, Zirconium 5 and Zirconium Flour 325 mesh to ceramic industries.
Application Of Zirconium Silicates :
Opacifier for pottery and porcelain glazes ,wall tiles, roofing tiles, sanitary ware etc
Frits, Glazes & Enamels.
Admixture for ceramic body. (Improvement of property and Opacification of color)
Characteristics: White powder or tiny crystalls, nodorousand salty, easily soluble in water,insoluble in alcohol, presenting slightly alkalinity, decomposed when heating. Decomposed slowly when exposed to moist air.
Quality Standard
Item The National Standard
The Total Alkalinity Content(NaHCO3)% 99.0, 100.5
Loss on Dring% 0.20
PH Value(10g/1) Solution, 8.6
Arsentic Content% 0.0001
Heavy Metal Content, 0.0005
Ammonium Salt pass
Clearness pass
Uses: food fermentation, feed addive, detergent ingredient, carbon dioxide foamer, pharmacy, leather, ore milling and metallurgy, detergent for wool, extinguisher and metal heat-treating, fiber and rubber industry, etc.
Packing:25kgs or 50kgs plastic woven bags lined with one layer polythene bag.
(We can meet with all your demands according with your need.)
1.Name: Sodium nitrate
Chemical formula: NaNO3
Formula weght:84.99
2.Property:
(1) ordinary sodium nitrate: white little crystals or light yellow
(2) dry powder sodium nitrate: non-caking, showing loose status.
Density:2.257. It is liable to deliquesce, dissolved in water, soluble in liquid ammonia, slightly soluble in ethanol and glycerin, Melting Point:308. While being heated up to about 380 it will decompose and release oxygen and turn into sodium nitrite,as the heating goes on, it will decompose into oxygen, nitrogen and nitrogen oxide. It has strong oxidability and can cause combustion explosion if being mixed with organic substance, sulfur, sodium nitrate etc.
3. Usage:Â it has been wildly used in the glass industry, dye, dynamite, metallurgy, machinery, ceramic etc.
4. Specification: (Technical Standards:GB/T4553-2002)
Item Unit High G. First G. Qualified G. Dry powder G.
Assay % 99.7 99.3 98.5 99.3
Sodium nitrite % 0.01 0.02 0.15 0.02
Chlorides % 0.25 0.30 -- 0.25
Water insolubles % 0.03 0.06 -- 0.03
Moisture % 1.0 1.5 2.00 0.2
Carbonates % 0.05 0.10 -- 0.1
Iron % 0.005 -- -- 0.005
Loose degree -- -- -- 95
5.Package: net 25kg/50kg net each in plasic woven inner plasic bag,or 500kg net each in flexible container.
Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released.
Specificatin:
grade chemical cmpsitin % Physical character
F Al N2 Fe2342- P25 LI Bulk dity g/cm3
AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5
AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3
AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7
AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7
Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc.
Brief Intrductin f the Prductin Technics
In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water.
Packaging
packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.
