Kesri Alloys Private Limited

We deals in the following products of India, China, Taiwan and Korea Origin:-
1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc)
2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc)
3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc)
4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc)
5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless )
6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps.
7)Heavy Duty Props & Light Duty Props.
8)Nuts, Bolts, Nails & Fastners
9)System Scaffolding, Base Plate & Adjustable Base.
10)Steel Tie Rod, Waller Plates and Wing Nuts.
11)Drop Forged and Pressed Sheet Metal Couplers of all types.
12)Steel Billets, Steel Angle & Steel Channels.

We have a wide variety stock of rebar, available dimensions from 8 mm to 32 mm,grades 60,40 ASTM A615,and BS4449, lengths 4,5,6,9,and 12 meters,plain,and deformed bars. Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60 Standard BS4449,JIS,ASTM/A615 Length 6m,12m Application Widely used in construction industry.

Stainless Steel Wire Rod, Bright, Hex, Round, Flat, Hexagon, Triangle, Square Bar : ASTM / ASME SA 276 TP 304 , 304L , 309S , 309H, 310S , 316 , 316L , 316 TI , 317 , 321 , 347 , 410 , 420 , 430 ,431 , 440A ,B & C, 446

ASTM / ASME SA 479 TP 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 321 , 321H , 347 , 347 H , 410, 430 ,431 & 444.Duplex Steel Wire Rod, Bright, Hex, Round, Flat, Hexagon, Triangle, Square BarASTM / ASME SA 276 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760.

Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60
Standard
BS4449,JIS,ASTM/A615

Length
6m,12m

Application
Widely used in construction industry for reinforcing concrete(Express way; office building, Bridge etc) Transportation By sea(20' 40' container)

Product Details:
Unit Length 3 m, 6 m
Material Grade 316,316L
Thickness/Diameter 2-3 inch, 3-4 inch, 1-2 inch, 0-1 inch
Brand Cromonimet,Steel,Ltd
Single Piece Length 3 meter
Hardness Soft
Surface Finishing Smooth
Technique Cold,Rolled
Anodised Yes
Tolerance As,per,H9,&,H11
Payment Terms After,discussion
Third Party Inspection Tpi YES
Test Certificate Provided
Pipe Fluid Water, Gas, Steam
Size >40 mm,1-10 mm,10-20 mm,20-30 mm,30-40 mm,50 mm
Material Stainless,Steel
Application pharmaceuticals
Condition New
Features:
Easy to use
Less maintenance
Precise engineering
Applications:
Ball Valves, Needle Valves, Filter Valves, Connectors, Couplings, Plugs, Hose Ends, Manifolds, Nuts, Bolts

Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material 201 301304L 309S 316L310S321410 4302205 2507 904L INCOLOY Alloy HASTELLOY MONEL etc

Specifications

Round bar

Diameter : 0.1~500mm

Hexagonal bar

Size : 2mm~100mm

Flat bar

Thickness : 0.3~200mm

Width : 1~2500mm

Square bar

Size : 1mm*1mm~800mm*800mm

Length : 2m, 5.8m, 6m, or as required.

Surface : Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term : Ex-work, FOB, CFR, CIF, etc.

Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time : Standard size is in stock,prompt delivery or as order's quantity.

Package : Export standard package, bundled or be required.
The inner size of container is below:

* 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM

* 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM

* 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Use of stainless steel round bar:

1. It is used to manufacture self tapping screws such as bolts and nuts;

2. Used for manufacturing rivets;

3. Used for making spring steel wire and transmission mechanism parts;

4. It can be used for filling and strengthening in welding materials;

5. Main parts and components that can be used to manufacture molded
articles;

6. It can be made into welded pipe for deep processing of seamless steel
pipe or raw material of seamless steel pipe.

7. It is widely used in petroleum, chemical, food and other industries

8. It can also be used in shipbuilding, boiler and pressure vessel
manufacturing, etc.

9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells

10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints

11. Widely used in hardware products factories and machinery manufacturers

12. Widely used in various vehicle parts

13. Wide application and furniture decoration industry

14. Widely used in various mechanical equipment

15. Widely used in various pipelines

16. Widely used in various construction machinery

17. Applied to household appliances

18. Applied to electronic communication equipment

Material

* ASTM(1005,1006,1008,1010,1015,1020,1025,1030,1035,1040,1045,1050,1055,1060,1065,1070,1080,1084,1016,1022)

* DIN(Ck10,Ck15,Ck22,Ck25,Ck30,Ck35,Ck40,Ck45,Ck50, 30Mn4,40Mn4)

* BS(040A04,095M15,045M10,080A40,045M10,080M50)

* Thickness : 0.1mm-300mm or as required

* Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

* Technique : Hot rolled,cold rolled

Surface Treatment

* Clean, blasting and painting according to customer requirement

Thickness tolerance

+ 0.1mm

* Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

* Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts

Warehouse Storage

* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

* Ordinary low alloy steel is a kind of ordinary alloy steel containing a small amount of alloy elements (in most cases, the total amount of w does not exceed 3%). This kind of steel has high strength, good comprehensive properties, corrosion resistance, wear resistance, low temperature resistance, and good cutting and welding properties.
* Under the condition of saving a lot of rare alloy elements (such as nickel and chromium), usually 1 t ordinary low alloy steel can be used for 1.2-1.3 carbon steel, and its service life and scope of use are much longer than carbon steel. Ordinary low alloy steel can be smelted in open hearth furnace and converter with general smelting method, and the cost is close to that of carbon steel.

Material : API5L

Thickness : 0.1mm-300mm or as required

Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique : Hot rolled,cold rolled

Surface Treatment : Clean, blasting and painting according to customer requirement

Thickness tolerance : �±0.1mm

Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

We are supplier of Reinforcement Bars.

can supply REBARS as per below: -Size: 6mm to 50 mm -Length: 6 meters up to 16 meters -Packing: Once folded bundles available.

hese corrugated steel bars are used as tension devices in the construction of concrete slabs and walls, as well as decorative/ornamental grille work. When used in concrete constructions, these help to strengthen and hold concrete when it is compressed, and come in a wide variety of sizes to fit various building construction needs. At ARC. AVAILABLE IN 3/8 (10mm), 5/8 (16mm), (20mm), (12mm), 1 (25mm) and 1 (32mm)