REMARK:
The product should be closed tightly, protected from light and moisture, the shelf life is 12 months.
These figures are for reference only, please contact us for detail.
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
RTV 2 Liquid Silicone Rubber is a type of Room Temperature Vulcanization Silicone rubber, contains two parts, Part A is silicone rubber, and Part B is cure agent / catalyst, when the part A and part B mix evenly at the ratio of 100:2, the silicone rubber will be cured.
RTV 2 Liquid Silicone Rubber can be used for all types of products molds making, such as : Gypsum / plaster. Cement, Artificail Stone, GRC, GFRC, GRC,Tires ,PU ,Resin ,Soap ,Candle etc, for all size from small to few meters .
RTV 2 ( Tin Cured ) Silicone Rubber
RTV 2 Liquid Silicone Rubber is a type of Room Temperature Vulcanization Silicone rubber, contains two parts, Part A is silicone rubber, and Part B is cure agent / catalyst, when the part A and part B mix evenly at the ratio of 100:2, the silicone rubber will be cured.
RTV 2 Liquid Silicone Rubber can be used for all types of products molds making, such as : Gypsum / plaster. Cement, Artificail Stone, GRC, GFRC, GRC,Tires ,PU ,Resin ,Soap ,Candle etc, for all size from small to few meters .
corrugated silicone tube is widely used in medical industry, it is able to withstand high temperature like autoclave sterilization. silicone is a good material to pass the medical test like bio-compatibility test.
Silicon bracelet
Food grade silicon material
Size: 65mm(dia), 12mm(l), 2mm(t)
Non-stick, water safe, foldable, any color available
Fda standard, heat resist from -50fpc to 230fpc
791 Silicone Weatherproofing Sealant is a specified, premium performance
weather sealing product specifically designed for general glazing and weather sealing
in curtain wall and building facades.
Description
LYSI-401 is a pelletized formulation with 50% ultra high molecular weight siloxane polymer dispersed in low density polyethylene (LDPE ). It is widely used as an efficient additive for PE compatible resin system to improve the processing properties and surface quality, such as better resin flow ability , mold filling & release, less extruder torque , lower coefficient of friction , greater mar and abrasion resistance
Benefits
(1) Improve processing properties including better flow ability , reduced extrusion die drool , less extruder torque , better
molding filling & release
(2) Improve surface quality like surface slip, lower Coefficient of friction, Greater abrasion & scratch resistance
(3) Faster throughput , reduce product defect rate. (4) Enhance stability compare with traditional processing aid or lubricants
How to use
Addition levels between 0.5~5.0% are suggested . It can be used in classical melt blending process like Single /Twin screw
extruders, injection molding. A physical blend with virgin polymer pellets is recommended .
Package
25Kg / bag , craft paper bag
Storage
Transport as non-hazardous chemical. Store in a cool , well ventilated place . Shelf life
Original characteristics remain intact for 24 months from the production date , if kept in recommend storage.
1.Description of life casting rtv-2 silicone rubber for prosthetic hands
RT-810 silicone rubber is platinum cure silicone rubber with medical grade , it belong to be life casting silicone rubber. The silicone rubber will be cured under room temperature and can be cured under room temperature and can be fastly by heating. It's two components liquid silicone rubber, the mixing ratio is 1:1. It has an exceptional fluidity and good operability. Especially, the platinum cure silicone rubber has a lower shrinkage, higher temperature resistance
G810 is extremely soft as a real feeling as humman skin
2.Characteristics of life casting rtv-2 silicone rubber for prosthetic hands
*An exceptional fluidity and good operability
*Good tensile strength and tear strength
*Food grade silicone rubber
*high temperature resistance
*good flexibility
*No smell ,non-toxic
*long shelf-time &lifetime
*Lower shrinkage
3.Datesheet of life casting rtv-2 silicone rubber for prosthetic hands
Item
No. Hardness
(A°) Viscosity
(CS) Tensile-strength
( kgf /cm2 ) Tear-strength
(kgf /cm2 ) Elongation-break(%) Mixing
ratio operation time (25 ? ) Curing time ( 25 ?) shrink-age
RT-810 10 5000 40±5 10±2 450±50 1:1 20-30 mins 2~3 h =0.1%
Notice of life casting silicone for prosthetic limbs
RT-810 life casting silicone rubber is platinum cure silicone , which is very easy to cause cure inhibition , so
please do remember thoroughly clean the model and tool before operation . Besides , please avoid the condensation silicone rubber (100:2) contact or mix with the following material , otherwise the silicone won’t be cured :
1. Liquid condensation silicone ( condensation silicone not completely cured or organic tin compounds )
2. Sulphur, sulfide and sulfur rubber materials.
3. Amine compounds as well as contains the amine materials.
4. Pewter solder flux.
Packaging & Shipping
Packing:
20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B
25KG/drum vacuum packing for part A + 25KG/drum vacuum packing for part B
200KG/drum packing for part A +200KG/drum packing for part B
1. Description of food grade liquid silicone rubber for making mould
Addition-curing, Food grade, Translucent, Two-component mold making silicone.
2. Characteristics of food grade liquid silicone rubber for making mould
Acceptable for food contact
Outstanding release properties
Low viscosity
Easy mixing and degassing
High flowability
Odorless and Nontoxic
Enhanced durability
3. Application of food grade liquid silicone rubber for making mould
Food Grade Related Applications
Cake mold
Chocolate moldmaking
Candy moldmaking
Baking moldmaking
Ice trays molding
Casting butters
Casting for Kitchen products
5. Using instructions of food grade liquid silicone rubber for making mould
Step 1: Prepare and clean the prototype.
You must make sure your original molds perfect, fix the original mold on a board, then using some assistant material (like cardboard) to make a frame for to surround the prototype. The frame is no need, if we make the mold by brushing way.
Step 2: Take the silicone and catalyst as the ratio 100:2 (silicone : catalyst= 100:2), mix the silicone rubber and catalyst evenly.
Notes: rtv silicone rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicone rubber will be partly solidified and this will bring troubles for your final operation. What's more, the finishes molds will have a short life. All of these will cause a waste of silicone rubber.
Step 3: Vacuum pumping.
After mixed the silicone evenly, it is better to release the bubble by vacuum pumping.
Step 4: Pouring cast or brushing cast.
After released the bubble, we can pour/brush the silicone rubber on the prototype.
Notes: Please finishes all the steps within the operation time. If not, it will cause cross linking reaction, and no more further steps will be available. So, we have to pay attention to the pot life and curing time.
Packaging & Shipping
Packing:
20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B
25KG/drum vacuum packing for part A + 25KG/drum vacuum packing for part B
200KG/drum packing for part A +200KG/drum packing for part B
1.Description of liquid silicone rubber
C830 Silicone rubber is condensation cure silicone rubber for mold making. The silicone rubber will be cured under room temperature, It’s two-components, the mixing ratio is 100:2 . Part A is a flowable liquid silicone , part B is the catalyst. It has an exceptional fluidity and good operability. C-830 tin cure mold silicone has a good property , it is suitable for various mold making .
2.Characteristics of liquid silicone rubber
*An exceptional fluidity and good operability, easy to demold
*Good tensile strength and tear strength
*lower shrinkage
*non-deformation ,non-oily
*good flexibility
*eco-friendly
*long shelf-time &lifetime
C830 Silicone rubber is mainly suitable middle sized product and big size with simple pattern.
Package:
1kg/drum,5kgs/drum,20kgs/drum,25kgs/drum,200kgs/drum based on vacuum packing.
Shelf life and transportation
1. Twelve(12) months when stored at 25C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
