Optical Scale Sensor
The electronic volume scale on conveyor belts measures the volume of material on the band through an electro-optical sensor ( See Figure below ) and transfers the data to a a Programed mobile phone and it to the inclueded printer to print datas at sinde and or to computer for statistical purposes,
It works without contact with the material and therefore is not affected by vibration or dust, it carries out measurements on belts with different degrees of inclination, even when the inclination is varied during the work. Automatic measurement and data storage, data transfer via Bluetooth. failure factor 0.7%.
The measurement is based on the volume and the density factor of the aggregate will convert in weight
We apcom scales (p) ltd are manufacturer and exporter of weigh bridges and weighing scales ranging from capacity 1mg to 200 tones we specialize in the manufacture of weighing indicators with over 80 models to choose with our special expertise in the manufacture of weighing indicators with flip display supported with battery backup we also manufacture load cells and digital load cells and digital indicators for weigh bridges we specialize in the manufacture of compression stainless load cells both digital and analog , with an new innovation in weighing technology by producing wireless load cells and wireless indicators and also conversion of analog load cells to wireless load cells , we also specialize in low end model indicators for platform scales and platform conversion kits, we also manufacture high precision balances, tank weigher's, silo weigher and portable weigh bridges, and load cells , indicators for dynamic and static weighing, and weighing automation as per requirement
Fully electronic weighbridges
Model no. Capacity accuracy platform (mtrs)
Wb-e-25mt 25 mt 5 kg 7.5 x 3 / 9 x 3
Wb-e-30mt 30 mt 5 kg 7.5 x 3 / 9 x 3
Wb-e-40mt 40 mt 5 kg 7.5 x 3 / 9 x 3 / 12 x 3
Wb-e-50mt 50 mt 5 kg 7.5 x 3 / 9 x 3 / 12 x 3
Wb-e-60mt 60 mt 10 kg 12 x 3 / 15 x 3
Wb-e-80mt 80 mt 10 kg 15 x 3 / 18 x 3
Wb-e-100mt 100 mt 10 kg 15 x 3 / 18 x 3
Comprehensive technical parameter
Accuracy class: oiml III
Weighing range: 10 ~ 120t
Length of platform assembly: 6 ~ 24m
Platform width: 3 / 3.4m
Safety overload: 130% max
Max transmitting distance of analog signal: 100m
Max transmitting distance of digital signal: 1000m
Operating power supply: 240 / 220 / 110vac, 50 / 60hz
Relative humidity: < 95%
Working temperature: -10 ~ +40 ªc (indicator)
30 ~ +65ªc (scale body)
Note: the lowest working temperature of scale body can be down to -40f¦ according to userµs demand.
Features of digital truck scales:
1.Numeral transformation technology and compensation
A.The inner part of the weighing load cell contains module conversion device and cpu processing unit.
B.Auto-compensation with digital technology to the parameter of load cell such as non-linearity, temperature, etc.
C.Free of calibrating for the scale if the load cells are replaced.
2.With the calibrating and digital technology, bias-load (four corners) calibration of the truck scale can be completed only once.
3.Digital communications technology
A.The central line structure can be used by several weighing load-cells (up to 32) in the same system.
B.Rs485 interface is used and long-distance signal transmission is possible, with the transmission distance not less than 1000m.
C.Output signal at 3~4v strengthens the capability of anti-interference
And lightening protection of the system.
You can use the scale durng rechargng
Auto zero--settng when swtch on the scale
Auto zero--tracng.
Swtch among weghng, countng, percentum.
Functon of choosng weght range.
Workng temperature range:0½+40
We are iso 9001:2000 certified company and one of the leading manufacturers of 'gill' electronic weighing scales.
As per our companyÆs policy we can appoint only one dealer in each city. So kindly send us your details for us to take right decision.
