Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature).
Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine.
The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades:
L - summer, used at ambient temperatures above 0 C;
3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation <-35 C and n <-25 C), or winter, used at temperatures up to -30 C, then the fuel must have a stasis <-45 C and n <-35 C);
- Arctic diesel fuel, the temperature of which is up to -50 C. The sulfur content in diesel fuel of grades L and Z does not exceed 0.2% for type I fuel and 0.5 for type II fuel, and grade A 0.4%
Diesel En590 10-50-500-5000 And Others Ppm Ultra Low Sulphur.
D2 0,2-62 Gost 305-82 Or 0,01 Or 0,05.
D2 Automotive Fuel Oil (ago).
D6 Virgin Fuel Oil.
Hsd Diesel High Speed 500ppm En90.
Diesel En590 Euro4 Gost 52368.
Pms Premium Motor Spirit
Jp54 (ts1) Gost 10227-86.
Jet Fuel A1 Gost 10227-86.
Marine Fuel Oil Cst 180-280-380.
Espo (siberia Pacific Oil) Crude Oil Api 34,7.
Lco (light Cycle Oil).
Mazut Mt100 Gost 10585-75 And 10585-99.
Rebco Gost 51 858-2002/9965-76 Api32/crude Oil 39-1623-93.
Lpg 50/50 Propane/butane - 70/30 P/b.
Lng 5542-87 By Iso Containers Etc.
Gasoline All Types (87-89-92-95).
Bitumen/asphalt All Grades.
Fertilizers Urea, Dap, Etc
Product Description :
Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. ... These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils..
Price of product ( USD price or FOB price) :
20.000 MT monthly market price.
100.000 MT monthly market price Less 5%.
Product origin : Russia and Non Russia
Key Specifications/Special Features :
All types/grades of Fuels, Gas, Oil are available for supply.
Many commercial names for oils, fuels, gases, etc. are used in the market.
To avoid misunderstanding basic details of specifications needed by buyer are mandatory.
Specifications for types/grades of products (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs.
Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.
Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.
As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.
The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS.
For petroleum products, we can put you in touch with our friend end-sellers or title holders who can provide dependable and sincere offers for express work with non-sanctioned origins.
Please contact us only if you are the real end buyer or his direct mandate.
EN590 ULSD available in Major Ports for FOB shipping terms, Kazakhstan Origin,
EN590 FOB price is $470/mt including $10 commission to buyer's side.
FREE ON BOARD (FOB) PROCEDURE
1. Buyer Issues ICPO:
The buyer submits an Irrevocable Corporate Purchase Order (ICPO) with banking details and passport information.
2. Seller Issues Commercial Invoice (CI):
The seller sends a Commercial Invoice (CI) for the available product, which the buyer countersigns.
3. Seller Provides POP Documents:
The seller provides Proof of Product (POP) documents, including:
SGS Report
Tank Storage Receipt (TSR)
Product Analysis
Injection Report
Authority to Verify (ATV)
Refinery Commitment Letter
Authorization to Sell and Collect (ATSC)
4. Buyer Verifies POP:
The buyer contacts the tank farm to confirm product availability.
5. Payment & Dip Test:
The buyer pays for a 5-day tank lease, and the seller issues an Unconditional Dip Test Authorization (UDTA). The tank farm provides a Clearance Access Entrance Permit (CAEP) for the dip test and SGS report.
6. NCNDA/IMFPA Signed:
All intermediaries sign the NCNDA/IMFPA and send it to the seller for endorsement.
7. Sealing & Final Payment:
After a successful dip test, the buyer requests tank sealing. The buyer pays for the full product via MT103/T/T and extends the tank lease for 48 hours.
8. Payment to Intermediaries:
The seller pays the intermediaries within 48 hours of receiving payment
TRANSACTION PROCEDURES FOR FOB JURONG/QINGDAO PORT TANK TO TANK (TTT)
1) Buyer issues ICPO and certificate of incorporation
2) Seller issues Commercial Invoice (CI) , buyer's signs and returns to Seller with his TSA, Seller verify buyer TANK FARM and make 3days tank lease payment to the buyer tank farm for the Injection Process.
3) Buyer pays his Tank Farm Company for 2 days tank storage costs, after his Tank Farm Company has received the buyer's payment the Seller Company pays 3 days cost (totaling) 5days TSR
4) Seller inject into buyer tank and issues SGS, ATV and Unconditional DTA.
5) Buyer conducts Dip Test and makes the payment for the total value of product injected TRANSACTION PROCEDURES FOR FOB JURONG/QINGDAO PORT TANK TO TANK (TTT)
1) Buyer issues ICPO and certificate of incorporation
2) Seller issues Commercial Invoice (CI) , buyer's signs and returns to Seller with his TSA, Seller verify buyer TANK FARM and make 3days tank lease payment to the buyer tank farm for the Injection Process.
3) Buyer pays his Tank Farm Company for 2 days tank storage costs, after his Tank Farm Company has received the buyer's payment the Seller Company pays 3 days cost (totaling) 5days TSR
4) Seller inject into buyer tank and issues SGS, ATV and Unconditional DTA.
5) Buyer conducts Dip Test and makes the payment for the total value of product injected into the tanks through the means ofMT103-
6) Seller pays all intermediaries involved in the transaction, and subsequently monthly shipment continues as per terms and Conditions of the sales and purchase agreement contract between buyer and seller .
