* 1500W Power; 220-240V; 50-60Hz
*Ceramic heating element
*Selector fan / warm air / hot air
*Integrated handle in housing
*Oscillation function at 70 degrees
All products are using SUS304 or SUS321 seamless stainless steel pipe, MOG holder and MGO head with high temperature 1800C,99% MGO rod,overseas high temperature MGO powder, Cr20Ni80 resistance wire ,Ni-Mn lead wire and Silicone Rubber wire .It suits for mold heating . Large-scele production with competitive price,Good-look appearance of the product and excellent quality .
Working principle of the oil heater
The user only needs to connect the equipment to a power supply, and arrange medium inlet and outlet pipes and electrical interfaces before use. Electrical heat conduction oil furnace (also known as oil transfer heater), the electric heater is directly inserted into the organic carrier (heat transfer oil) for direct heating.
A circulating pump is used to create liquid-phase circulation of heat conduction oil, thus, to transfer the heat to one or several pieces of heat using equipment. After unloaded in the heat using equipment, heat transfer oil will return to the heater via the circulating pump, again to absorb heat, and transfer the heat to the heat using equipment. This process is repeated again and again, realizing continuous transfer of heat.
As a result, the temperature of objects being heated rises, and heating requirements are fulfilled.
The oil heat transfer machine adopts a digital display temperature controller, and has functions of over temperature alarm, low oil level alarm and over pressure alarm.
Characteristics of oil heater
1)our electric heat conduction oil furnace is equipped with a perfect operating control and safet monitoring device, so it can realize automation control
2)it can reach a higher operating temperature under lower operating pressure
3)high thermal efficiency, can reach to higher than 95%, the control precision can be
4)the equipment is of small volume, flexibility to install, adapting to install nearby the heat using equipment
Cartridge heater is one of the tubular heating elements. The heating part is a nickel-chromium heat-resistant alloy wire wound on a magnesium oxide core rod with excellent insulation and thermal conductivity. Between the heating wire and the outer sheath is high-purity magnesium oxide powder as an insulating material, and the air inside is compressed by the machine Into a cartridge heater.
After the main body of the cartridge heater is completed, fixed accessories or threads can be installed according to customer needs. There are many types of fixed accessories or thread structures. Please contact our sales or technical personnel for the best solution.
Advantages:
Small diameter, can be 3-35mm;
The length is not limited, it can be 20-2000mm;
The power is high, which is 2-5 times the power of the normal electric heating tube, and it can achieve a surface area of 20 watts/square centimeter; even a surface area of 60 watts/square centimeter;
It has the characteristics of simple structure, high mechanical strength, high thermal efficiency, safety and reliability, easy installation, long service life, no pollution, and low price. It also saves electricity, is safe to use, can be bent into various shapes, is light, and is easy to disassemble.
