Description:
The MS1451 is a piezoresistive silicon pressure sensor packaged in a surface mount configuration. It is intended for high volume applications where small size, light weight, low cost, and compatibility with automated assembly equipment are required.
The pressure sensor is available with a gage or absolute pressure sensing chip that is attached to a surface mountable ceramic substrate. A cap is attached to the ceramic substrate, protecting the chip and providing the pressure port.
The devices are shipped in plastic anti-static shipping tubes for use with automated production equipment. Caps are also available with a narrow hole or a large hole to interface with the pressure media.
Features:
* PC Board Mountable Pressure Sensor
* 0-60 mV Output
* Gage and Absolute Pressure
* Low Cost
* Surface Mount Package
* ±0.25% Pressure Non-linearity
* 3 Pressure Port Options
* Solid State Reliability
* Low Power
Pin header is used for PC board,pitch=0.8,1.27,2.0,2.54mm;SMD or DIP,Golden flash or Tin flash,with cap,with peg,packed by reel.
Pin header Key Specifications/Special Features:
•Insulator material: polyester (ul 94v-o)
•Contact material: brass
•Contact plating: Au or SN over 50ì, Ni
•Pitch: 0.8, 1.0, 1.27, 2.0 and 2.54mm
•Specifications:
Current rating: 3A
Operating temperature: -40 to +105°C
Contact resistance: 20Ù maximum
Insulation resistance: 1,000Ù minimum
Withstanding voltage: 1,000V AC.
1¡replace traditional, manual cutting method for pcb, use machine to cut it so that it minimizes stress and burr occurrence, also it prevents welding point crack.
2¡it can set cutting length for pcb and the maximum length for pcb cutting is 400mm;
3¡high efficiency, choice different speed upon different pcb. Vlow=150mm/s, vhigh=300mm/s;
4¡high accuracy, better safety; machine operation is simple and it is easy to maintain;
5¡the blade has special treatment so that long lifetime;
6¡during operation, keep pcb and the circular blade is moving to assure quality.
