Thermosyphon solar water heater relies on the natural circulation of water between the collector and the tank or heat exchanger. As water in the vacuum tubes is heated it rises naturally into the tank, while cooler water in the tank flows down to the bottom of the vacuum tubes, causing circulation throughout the system.
Technical specificationa
*Both of inner and outside water tank shell are made of SUS3042B food grade stainless steel plates, welded by argon arc. Water is pure and drinkable.
*Heat insulation of water tanks adopts polyurethane foam, thickness is 55mm.
*Silicon rings to connect and seal them.
*The tubes and supports are adjustable, power bearing is average, and can assure the vacuum tubes to use for long time.
*Whole glass vacuum tubes adopt super hard borax and silica glass.
*Absorb rate:=93%, thermal radiation rate:=6%(100 íµ)
*Resist 25mm hail, using life can last 15 years.
*Temperature when exposed to sun without water:250íµ, 2.5hours to boiling if using single tube.
*If you use electrical appliances to aid heating, to switch off the power supple before boiling.
*To test the water temperature before using, in order to avoid scalding.
This commercial hot water heat pump is the best solution for hot water supply of commercial project, and can work with advantages of high safety, stability, much convenience, energy saving, and environment friendly, which assures 24 hours comfortable hot water using. It is widely used in hot water project of school, hotel, hospital, supper market and other large building, which needs large water volume supply.
Commercial hot water heat pump series
Model
YINI-050S-RS
Heating mode
Circulating+Direct heat
Ambient temp.range
Rated heating capacity
18KW
COP
4W/W
Max. Running Current
9.7A
Power supply
380V 3N 50Hz
IP Code
IPX4
Safety function
High and low pressure protection, Overload protection, Temperature protection, Power phase sequence protection, etc.
Refrigerant type/weight
R407C/2.0kg
Compressor QTY
1 PCS
Compressor type
Scroll
Max. outlet water temperature
60
Water side heat exchanger type
Casing/high efficiency tank
Direct heat waterpipe nozzle
G1 Internal thread (inch)
Circulating waterpipe nozzle
G1 Internal thread (inch)
Air out type
Top discharge
Fan motor QTY
1 PCS
machine dimension
Packing dimension
Net weight
130KG
Gross weight
150KG
Detailed Images
Main Features
1) Copeland scroll compressor, quiet and high efficiency.
Product Specification
Power Range : 1.0 HP to 2.0 HP
Operating Speed : 0 - 3100 RPM
DC Power Range : 900 Wp - 2000 Wp
DC Voltage Range : 70 Vmp - 110 Vmp
Head Range : 30 Mtr - 90 Mtr
Discharge Range : 8000 LPD - 30000 LPD
Type of Duty : S1
- Zero Running Cost
- Less Maintenance
- Eco-Friendly
- Simple Installation
- Pollution Free
Material Of Construction - Motor
Part Grade
Mechanical Seal : Graphite Ceramic
Motor Shaft : Stainless Steel
Motor Body Pipe : SS-304
Lower Hosing : Aluminum
Diaphragm : High Nitrile butyl rubber
Top Cap : Stainless Steel
Bottom Plate : Stainless Steel
End Cap : Stainless Steel
MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP
Part Grade
Outlet : SS-304
Suction : SS-304
Outer Shell : SS-304
Rotor Screw : Stainless Steel
Stator : Rubber Coated Alloy
MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP
Part Grade
Check valve housing : SS-304
Check valve : PC
Suction : SS-304
Outer Shell : SS-304
Impeller : POM
Bowl : PC
Pump Bush : NBR
Pump Sleeve : Stainless Steel
Pump Shaft : Stainless Steel
Coupling / Pump Couple : Stainless Steel
52kw AIROSD KFXG-052UAII high temperature industrial heat pump water heater
It is one of the Heat Pump Water Heater High Temperature Hot Water Heater
1) Intelligent control: Micro processor based digital controller with LCD display.
2) Durable-more than 15 year's life time.
3) Adjustable water temperature setting: 25-85.
4) EVI Scroll compressor specially designed for high water temperature heat pump.
5) ECO-friendly refrigerant R134a.
6) High efficiency tube-in- shell water heat exchanger.
7) Easy installation and operation.
Optional:
Direct heating / Circulation heating type
Titanium Tube Heat Exchanger / stainless Steel Heat Exchanger
R410a, R22, R407c refrigerant is available.
7kw KFXR-007SPCI Mini split domestic water heater heat pump with water tank 150L/200L/300L/400L/500L
1. Mitsubishi or Panasonic Rotary type compressor, low vibration, low noise and high reliability.
2. Polyurethane insulated water tank.
3. Intelligent EE valve, excellent efficiency at different ambient temperature.
4. Built-in famous water pump.
5. Innovative W-A-R( Water, Air, Refrigerant) technology, higher efficiency up to COP 4.5.
6. Energy saving up to 80% than traditional electric heater
7. Automatically defrosting.
Salient Features
Highly efficient 3-Phase Water Filled Motor
- 100% EC grade copper winding
- Easily Rewindable
- Motor Designed with Higher Cooling Effect Ensures Longer Life
- Sustainable uniform performance for years
- Ensures long life durability
- Optimized Hydraulic & Mechanical Design
- Improved efficient performance
- Excellent output in Low Radiation
- Dynamically balanced design
- Zero maintenance
Product Specification
Power Range : 3.0 HP to 10.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 â?? 50 Hz
Input Solar DC Power Range : 3000 Wp, 10000 Wp
Input Solar DC Voltage Range : 330 Vmp , 600 Vmp
Head Range : 10 Mtr , 50 Mtr
Discharge Range : 126000 LPD , 425000 LPD
Type of Duty : S1
Material Of Construction
Part Grade
Oil Seal : Nitrile butyl rubber
Motor Shaft : SS - 420
Motor Body : Cast Iron / J4
Motor Bush : LTB-4 / Teflon
Thrust bearing assembly : SS - 420 & Carbon
Base : Cast Iron
Bracket : Cast Iron
Flange : Cast Iron
Casing : Cast Iron
Impeller : Cast Iron
Highly efficient 3-phase Air Cooled motor
- 100% EC grade copper winding
- Easily Rewindable
- Good suction lift characteristics
- Sustainable uniform performance for years
- Ensures long life durability
- Optimized Hydraulic & Mechanical Design
- Improved efficient performance
- Excellent output in Low Radiation
- Dynamically balanced design
- Double shielded ball bearings, so no need of external lubrication
- Mechanical seal or stuffing box is provided as per customers requirement
- Zero maintenance
Product Specification
Power Range : 1.0 HP to 10.0 HP
Operating Speed : 0 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 10000 Wp
Input Solar DC Voltage Range : 110 Vmp, 600 Vmp
Head Range : 10 Mtr, 50 Mtr
Discharge Range : 45000 LPD - 405000 LPD
Max. Suction Head : 7 Mtr
Type of Duty : S1
Material Of Construction
Part Grade
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
Salient Features
Highly efficient 3-phase water filled motor
- Easily rewindable
- Dynamically balanced design
- Extended life with flawless performance
- Thrust bearing : Carbon + S.S. material for High thrust load capacity
- 100% EC grade copper winding
- Presenting world 1st design (design registered 100% fully S.S.-304 investment casting pumps.
- Zero maintenance
- Superior performance
- Sand proof operation
- Highly efficient 3-phase water filled motor
Product Specification
Power Range : 1.0 HP to 20.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 20000 Wp
Input Solar DC Voltage Range : 110 Vmp - 600 Vmp
Head Range : 30 Mtr , 220 Mtr
Discharge Range : 10000 LPD - 420000 LPD
Type of Duty : S1
material of construction - motor
Part Grade
Body Lock : Spring Steel
Stud Ring : M.S. (Zinc Coated)
Stator Stamping : CRNGO - M45 Silicon
Winding Wire : 100% EC Copper
Shaft : SS-420
Rotor Stamping : CRNGO - M45 Silicon
Copper Lamination : 100% EC Copper
Upper Housing : SS-304
Lower Housing : SS-304
Connection Piece : SS-304
Oil Seal : NBR
TB Set : Carbon + SS
Base : SS-304
Drain Plug : Brass
Couple Sleeve : Stainless Steel
Water Bolt : Brass
MATERIAL OF CONSTRUCTION PUMP
Part Grade
Suction : SS-304
Couple : Stainless Steel
Couple Counter : SS-304
Rubber Seal : NBR
Bush Seal Cover : SS-304
Bowl : SS-304
Impeller : SS-304
Key : SS-410
Bowl Bush : NBR
Bush : LTB-4
Middle : SS-304
Cap : NBR
Outlet : SS-304
