13%-15%
Penetration Worked 60
GB/T 269
240-250
Dropping point min
GB/T 4929
135-140
Copper Corrosion
GB/T 7326
pass
Base Fluid Properties
Base Fluid Type
Mineral
Viscosity @40 cst
GB/T 265
185
Viscosity @100 cst
GB/T 265
12
Pour Point
-20
Propertie
Great in anti-water;
Better mechanical invariability;
Better anti-rust;
Good oxidation stability;
Can take place of calcium base and sodium base greases.
This product is made of refined base oil, thickened by fatty acid metallic soap thickener, added with many kinds of additives, for instance, abrasion and extreme pressure resisting, anti-corrosive, antioxidant and rustproof etc.
Synthetic technology motor oil specially designed for modern high performance engine with gasoline direct injection (GDI and Turbo-GDI) systems. Developed by latest evolution technology platform EVOTEC fortified with SMART Molecules that improve engine cleanliness and prevent low-sped pre-ignition (LSPI). Outstanding low friction and heat resistance enhance acceleration response, wear prevention and maintaining engine power for better drivability in all situations.
APPLICATION
Designed for high performance gasoline engine both GDI and Turbo-GDI.
Recommended for passenger car, sport car and SUV equipped with start-stop system.
Suitable for all port fuel injection (PFI) gasoline engines running with unleaded gasoline (ULG) and ethanol blended gasoline (E10, E20 and E85).
KEY FEATURES
Enhance excellent engine cleanliness especially in piston and help reduce LSPI occurrence in Turbo-GDI engine by SMART Molecules.
Improve superb engine protection against wear and prevent timing chain elongation for maintaining maximum engine performance.
Outstanding low oil friction with high heat resistance by EVOTEC technology for superior acceleration responsiveness and reduced oil consumption.
Better oil degradation resistance and engine sludge prevention through oil drain intervals.
Product Properties for AdBlue as per the revised ISO22241 standard.
Urea 32,5 % (approximate) solution dissolved within deionised water. As required by SCR equipped vehicles under the provisions of Emissions standards Euro IV (Euro4), Euro V (Euro5) & Euro VI (Euro6).
Urea Content 31.8 33.2 % by weight
Density at 20C 1.0870 1.0930 g/cm
Refracting Index at 20C 1.3814 1.3843
Alkalinity as NH3 0.2 %
Biuret 0.3 %
Aldehyde 5 mg/kg
Insolubles 20 mg/kg
Phosphate (PO4) 0.5 mg/kg
Calcium 0.5 mg/kg
Iron 0.5 mg/kg
Copper 0.2 mg/kg
Zinc 0.2 mg/kg
Chromium 0.2 mg/kg
Nickel 0.2 mg/kg
Aluminium 0.5 mg/kg
Magnesium 0.5 mg/kg
Sodium 0.5 mg/kg
Potassium 0.5 mg/kg
Texol Ultra S SAE 10W40 is an advanced, semi-syn- thetic engine oil meeting the requirements of almost all the engines in passenger cars running on multiple fuels like Gasoline, Bio Diesel, Gasoline-ethanol Mix, LPG & LNG. It is mainly suited for turbo charged, multi valve and direct injection engines, based on OEM recommendation.
Applications
They are semi-synthetic engine oils designed for use in modern gasoline engines, diesel engines (without partic- ulate filters) and gas engines of model year 2012 and later. And it is also suitable for use with bio diesel and Gasoline Ethanol blends.
Features and Benefits
As a Semi-synthetic engine oil, it provides excellent oxidation stability and low temperature flow properties.
Protection of three-way catalyst poisoning by reducing the volatility of the phosphorus in the lubricant.
Helps to protect the engine throughout the oil drain interval helps to protect high performance engines from power and performance robbing deposits.
Specifications and Approvals
API-SN
Health and Safety
Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.
Product Description
Texol Ultra X SAE 20W50 API SN is a mineral oil type energy-efficient Passenger Car Motor Oil, made with high quality solvent refined base oils and with additives of proven performance. The base oils provide excellent lubricity and oxidation resistance. The engine oil provides wide temperature range operability.
Applications
Texol Ultra X SAE 20W50 API SN is an engine oil designed for use in modern gasoline engines, passenger cars, SUVs, vans and light trucks. USA made cars following API specifications oils widely use this type of engine oil.
Features and Benefits
TEXOL ULTRA X
SAE 20W50 API SN
Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available
upon request from our Texol sales office.
High-temperature deposit protection for pistons.
Sludge Control.
Seal Compatibility.
Fuel economy.
Specifications and Approvals
API SN
Health and Safety
Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.
Texol Super Duty Plus SAE 15W40 API CI-4 is a heavy-duty multi-grade diesel engine oil for use in high speed diesel engines; specifically formulated for on-highway and off-highway applications. It complies with the low emission law especially Exhaust Gas
Recirculation (EGR) systems.
Applications
This oil is recommended for use in naturally aspirated and turbo-charged diesel-powered equipment from leading Japanese, European and American Manufacturers, mixed fleets, On-highway light and heavy-duty trucking, off highway industries including construction, mining, quarrying and agriculture. The oil is backward compatible with other API Diesel classes like API CH-4,
CG-4, CF-4, CD, etc.
Features and Benefits
Exceptional Thermal and Oxidation Stability ensures trouble-free operation.
Reduced maintenance costs due to minimized engine overhaul periods.
Advanced detergency/dispersancy leading to cleaner engines and longer component life.
Stay in grade shear stability provides wear protection and viscosity control.
Designed for use with fuels with Sulphur of 5,000 ppm.
Engine durability where EGR is provided.
Specifications and Approvals
ACEA E-7 (2016)
API CI-4 (Approved by API)
API CH-4 / API CG-4 / API CF-4 /
API CF / API SL / API SJ
Caterpillar ECF-2 / ECF-1-a
Cummins CES 20078 / 200777 /
20076
Detroit Diesel DDC 93K215
Global DHD-1
Mack EO-N / EO-M+
MAN M 3275 / 271
MB 228.3 / 228.1
MTU Type 2.0 / 1.0
Renaut RLD-2
Volvo VDS-3 / VDS (Volvo approved)
Deutz DQC III-10
Health and Safety
Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.
Texol Super Duty S 10W40 CI-4 is a Semi-Synthetic heavy-duty multi-grade diesel engine oil developed for longest drain interval to use in high speed diesel engines; specifically formulated for on-highway and off-highway applications.
Applications
This oil is recommended for use in naturally aspirated and turbo-charged diesel-powered equipment from leading Japa-nese, European and American Manufacturers, mixed fleets, On-highway light and heavy-duty trucking, off highway indus-tries including construction and mining.
Features and Benefits
Exceptional Thermal and Oxidation Stability ensures trouble-free operation.
Reduced maintenance costs due to minimized engine overhaul periods.
Advanced detergency/dispersancy leading to cleaner engines and longer component life.
Stay in grade shear stability provides wear protection and viscosity control.
Specifications and Approvals
API CI-4
ACEA E4/E7-16
MB 228.5
MAN M 3277
Volvo VDS-3
Scania LDF -2
Deutz DQC-I-10
MTU Type -3
Mack EO-N / Mack EO-M Plus
Cummins CES 20078 CES 20077
Renault RLD-2
Global DHD-1
Health and Safety
Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.
