The biggest feature of deep well pump is to make the motor and pump into one, it is immersed in the groundwater well for pumping and conveying water, a kind of pump, which is widely used in farmland irrigation and drainage, industrial and mining enterprises, urban water supply and drainage and sewage treatment. As the motor is submerged in water at the same time, the structure requirements for the motor are more special than the general motor. The structure of the motor is divided into four types: dry type, semi-dry type, oil-filled type and wet type.
Before starting the pump, the suction pipe and the pump must be filled with liquid. After the pump is turned on, the impeller rotates at a high speed, and the liquid in it rotates with the vane, and under the action of centrifugal force, it flies away from the impeller and shoots outward, and the liquid shot out in the diffusion chamber of the pump casing slows down gradually, and the pressure increases gradually, and then it flows out from the outlet of the pump and the discharge pipe. At this time, in the centre of the vane as a result of the liquid is thrown to the surrounding and the formation of neither air nor liquid vacuum low-pressure area, the liquid in the pool of liquid pool under the action of atmospheric pressure, through the suction pipe into the pump, the liquid is so continuously from the pool of liquid is pumped up and continuously from the discharge pipe out.
Product Specification
Power Range : 1.0 HP to 2.0 HP
Operating Speed : 0 - 3100 RPM
DC Power Range : 900 Wp - 2000 Wp
DC Voltage Range : 70 Vmp - 110 Vmp
Head Range : 30 Mtr - 90 Mtr
Discharge Range : 8000 LPD - 30000 LPD
Type of Duty : S1
- Zero Running Cost
- Less Maintenance
- Eco-Friendly
- Simple Installation
- Pollution Free
Material Of Construction - Motor
Part Grade
Mechanical Seal : Graphite Ceramic
Motor Shaft : Stainless Steel
Motor Body Pipe : SS-304
Lower Hosing : Aluminum
Diaphragm : High Nitrile butyl rubber
Top Cap : Stainless Steel
Bottom Plate : Stainless Steel
End Cap : Stainless Steel
MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP
Part Grade
Outlet : SS-304
Suction : SS-304
Outer Shell : SS-304
Rotor Screw : Stainless Steel
Stator : Rubber Coated Alloy
MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP
Part Grade
Check valve housing : SS-304
Check valve : PC
Suction : SS-304
Outer Shell : SS-304
Impeller : POM
Bowl : PC
Pump Bush : NBR
Pump Sleeve : Stainless Steel
Pump Shaft : Stainless Steel
Coupling / Pump Couple : Stainless Steel
Salient Features
Highly efficient 3-Phase Water Filled Motor
- 100% EC grade copper winding
- Easily Rewindable
- Motor Designed with Higher Cooling Effect Ensures Longer Life
- Sustainable uniform performance for years
- Ensures long life durability
- Optimized Hydraulic & Mechanical Design
- Improved efficient performance
- Excellent output in Low Radiation
- Dynamically balanced design
- Zero maintenance
Product Specification
Power Range : 3.0 HP to 10.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 â?? 50 Hz
Input Solar DC Power Range : 3000 Wp, 10000 Wp
Input Solar DC Voltage Range : 330 Vmp , 600 Vmp
Head Range : 10 Mtr , 50 Mtr
Discharge Range : 126000 LPD , 425000 LPD
Type of Duty : S1
Material Of Construction
Part Grade
Oil Seal : Nitrile butyl rubber
Motor Shaft : SS - 420
Motor Body : Cast Iron / J4
Motor Bush : LTB-4 / Teflon
Thrust bearing assembly : SS - 420 & Carbon
Base : Cast Iron
Bracket : Cast Iron
Flange : Cast Iron
Casing : Cast Iron
Impeller : Cast Iron
Highly efficient 3-phase Air Cooled motor
- 100% EC grade copper winding
- Easily Rewindable
- Good suction lift characteristics
- Sustainable uniform performance for years
- Ensures long life durability
- Optimized Hydraulic & Mechanical Design
- Improved efficient performance
- Excellent output in Low Radiation
- Dynamically balanced design
- Double shielded ball bearings, so no need of external lubrication
- Mechanical seal or stuffing box is provided as per customers requirement
- Zero maintenance
Product Specification
Power Range : 1.0 HP to 10.0 HP
Operating Speed : 0 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 10000 Wp
Input Solar DC Voltage Range : 110 Vmp, 600 Vmp
Head Range : 10 Mtr, 50 Mtr
Discharge Range : 45000 LPD - 405000 LPD
Max. Suction Head : 7 Mtr
Type of Duty : S1
Material Of Construction
Part Grade
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
Salient Features
Highly efficient 3-phase water filled motor
- Easily rewindable
- Dynamically balanced design
- Extended life with flawless performance
- Thrust bearing : Carbon + S.S. material for High thrust load capacity
- 100% EC grade copper winding
- Presenting world 1st design (design registered 100% fully S.S.-304 investment casting pumps.
- Zero maintenance
- Superior performance
- Sand proof operation
- Highly efficient 3-phase water filled motor
Product Specification
Power Range : 1.0 HP to 20.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 20000 Wp
Input Solar DC Voltage Range : 110 Vmp - 600 Vmp
Head Range : 30 Mtr , 220 Mtr
Discharge Range : 10000 LPD - 420000 LPD
Type of Duty : S1
material of construction - motor
Part Grade
Body Lock : Spring Steel
Stud Ring : M.S. (Zinc Coated)
Stator Stamping : CRNGO - M45 Silicon
Winding Wire : 100% EC Copper
Shaft : SS-420
Rotor Stamping : CRNGO - M45 Silicon
Copper Lamination : 100% EC Copper
Upper Housing : SS-304
Lower Housing : SS-304
Connection Piece : SS-304
Oil Seal : NBR
TB Set : Carbon + SS
Base : SS-304
Drain Plug : Brass
Couple Sleeve : Stainless Steel
Water Bolt : Brass
MATERIAL OF CONSTRUCTION PUMP
Part Grade
Suction : SS-304
Couple : Stainless Steel
Couple Counter : SS-304
Rubber Seal : NBR
Bush Seal Cover : SS-304
Bowl : SS-304
Impeller : SS-304
Key : SS-410
Bowl Bush : NBR
Bush : LTB-4
Middle : SS-304
Cap : NBR
Outlet : SS-304
WFB series of seal-less self-control self-priming pump adopts no-leakage V-type seal assembly, eliminating the traditional pump packing seal, packing seal, mechanical seal, completely subdued the running, bubbling, dripping, leakingâ??, is to replace the original variety of long-shaft submerged pumps, submersible pumps, submersible pumps, etc. Ideal equipment. Disadvantages of the structure of the pump: First, downtime liquid leakage along the direction of the shaft outward, for frequent starting equipment is not very suitable for the occasion; Second, the power consumed by the secondary impeller is too large, the pump efficiency is low.WFB improved structure for the sealing device, one is to improve the efficiency of the pump, the second is to reduce the power of the motor, the third is to inhibit the leakage of the pump shutdown phenomenon. Sealing device in the movement process without friction, no wear and tear, the service life is more than 10 times longer than similar products. Transplantation of the vacuum pump principle, self-absorption performance is stable and reliable, in particular, the use of â??electric air control valveâ?? truly realised â??a diversion, life-long self-absorptionâ??. High efficiency, low vibration, low noise, flexible movement, easy disassembly, easy to install, no need for foot fixing, eliminating the difficulties of transporting, installing and maintaining the long-shaft submerged pump. With superior self-control function, it can be used with high-tech fields and highly automated series.
