Equipment Parameters
Dimension: 430 350 1050(DWH)
Weight: 55KGS
Power comsumption: 180W
Working Voltage: AC220V/230V ± 10% 50Hz;
AC110V ± 10% 60Hz;
DC24V
Working Temperature: -25 C~+70C
Spped of Rising And Dropping: 1.2s, 3s, 6s
Arm Length: 2-6 meters (the user can choose)
Arm Type: barrie arm, fence arm, folding arm.
Function Features
Core of mechanism Using the most stable movement of the inconstant speed operation organization, parts form with hardware punched, not only the product is exquisite and portable, but also high precision and long service life;
Humanized appearance design, easy operation, concise and easy;
Electrical motor adopts overheating protection system, to avoid the motor heating up; The control system adopts advanced digital processing technology, with the hit protection, infrared Function etc;
Host machine adopts high sensitive limit switches and time dual protection control,to make barrie stop accurately in place;
In the process with anti-hit function, effectively avoid injury;
With automatic delay stick down function, gate arm falls down if no vehicle pass in certain minutes;
Dc option gates adopt storage battery, can run 200 times in power outage;
This product can be used matching with any other access controller.
LPR based advanced access control system enables high-efficient and user convenient parking lot operation overcoming all the weak points of legacy RF card type system.
DC24V brushless motor digital car park barrier system, automatic vehicle barrier provides adjustable speed 0.6 second up to 6 seconds depending on the settings
Car park barrier system JDDZ-10 is an efficinet vehicle access control solution for controlling entry of authorized resident vehicles at safe pre-determined time intervals, coming with compact and stylish design for restrict areas with high traffic flow. The combination of the advanced digital DC24V brushless motor and a planetary gearing system with sinusoidal movement for a soft start and soft stop action, ensures a smooth elevation or lowering of the barrier arm, and avoiding bounce in the end position. On the other hand, car parking barrier JDDZ-10 provides variable speed 0.6~ 6 seconds for different boom length. In general, each boom length is set to a standard operational speed but can be simply adjusted directly from control board to get a faster or slower speeds depending on the requirement.
Designed for both indoor and outdoor application, providing a rapid, reliable and smooth operational way with low noise and low power consumption, and flexibly integration various access control systems, automatic car parking barrier gate JDDZ-10 is generally used in commercial and industrial applications such as controlling access to parking lots and garages in large business complexes, airports and public facilities.
Car Park Barrier System Featurers
1. Speed 0.6 second up to 6 seconds depending on the settings
2. Energy saving DC24V brushless motor gearbox
3. Manual operation in the event of power failure
4. Smooth and efficient operation
5. Secure operation with safety devices
6. Possibility of integration with any type of access control systems
7. Slim profile; fits on narrow islands
8. Environmentally durable cabinet
9. User-friendly and optimum accessibility
10.Easy installation and service
Car Park Barrier System Applications
Private and company premises
Industrial and hospital premises
Tunnels
Motorways
Public facilities
Shopping mall
Car Park Barrier System Parameters
Power Supply: AC220V/ AC110V ±10%, 50/60hZ
Rated Power: 140W
Motor Type : DC 24V brushless digital motor
Motor Speed: 1500RPM
Open Time & Boom Length:
1.0~1.2 seconds 2.5 meter straight boom
1.5~2.0 seconds 3.0 meter straight boom
2.0~2.5 seconds 3.5 meter straight boom
2.5~3.0 seconds 4.0 meter straight boom
3.0~3.5 seconds 4.5 meter straight boom
3.5~4.0 seconds 5.0 meter straight boom
4.0~4.5 seconds 5.5 meter straight boom
5.0~6.0 seconds 6.0 meter straight boom
Max 4.5 meter articulated boom
Noise: â?¤60dB
Error Action : â?¤0.0%
Interfaces : IR sensor, vehicle detector, RS485, open/ close/stop
Output : Relay output, max AC240V, 5A bearable
Life Cycle: 4.5 million times
Work Temperature: -35 C~60 C, Relative humidity: 0%, no condensation
Specification/Additional Details
Voltage: 220-415 Volt
Body Material: Mild Steel
Frequency: 50 Hz
Usage/Application: Car Parking
Lifting Height: 1600mm/1800mm
Lifting Capacity: Up to 2500 Kg
Wireless communication, easy installation and maintenance, low installation cost
Pgs software has two frameworks--b/s and c/s, supporting user to visit anywhere anytime
Advanced chip supports setting data storage to avoid resetting trouble after power off
Zcu lcd shows detectors' status supporting offline breakdown checking
Wireless ultrasonic detector has two versions: surface mount and hoisting mount supporting different carpark terrains and kinds of parking positions.
Proffesional Car Reverse Parking System With 4 BLACK Color Sensors
Description:
4 sensor system. double CPU and advanced chipset for enhanced coverage and detection(0-2.5m).
With digital colored LED display(number and light).
Helps to prevent car from collision.
Helps to provide increased safety of passangers, pedestrians who happen to be around the moving vehivle.
Detect small children and low walls as well.
Easy to install(comes with double side sticker for fixing main control box and led display)
A saw drill head included.
Complete guide inside on how to install.
Specifications:
Ultrasonic Frequency-40KHz
Working Temperature-(-30~ 70c)
Display Working Temperature-(-20~ 60c)
Display Size-11x1.7cm
Display Weight-89g
Main Control Box Size-10.5x6x2cm
Main Control Box Weight-63g
Package Includes:
1x Main Control Box
1x Led Display Indicator
4x Black Parking Sensor
1x Hole Saw
1x Power Cable
2x Double Side Sticker
User Manual
With the tried and tested principle of stacking and moving closer together, Combiparker 555 creates even more space. With up to 8 levels on top of each other and up to 7 grids next to each other.
Vehicles are parked in parking levels with a specially designed adjustable sliding carrier units. In every second grid, transport lifts ensure the lifting and lowering of vehicles. These grids also serve as the entrances and exits.
Highlights:
1. Compact parking on up to 8 levels above ground
2. Variable arrangement of 3-7 grids beside one another
3. Different car heights are possible at different levels
4. Carrying capacity per platform / per car available with 2000kg
5. A combination of stacking and moving cars closer together
6. Independent parking
7. Cost-effective technology
8. High level of operating and functional safety according to EN norms
9. Easy operation
10. Suitable for car service centres, car dealers, car rent
