Ozsutrading

About Meltblown Nonwove
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties

Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc

About Meltblown Nonwoven
â?¢ Melt blown is a one step process to make fabrics from polymer.
â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid.
â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
â?¢ Adjustable Pores And Capillary Structure
â?¢ Excellent barrier properties
â?¢ Filament size 1 -3 �µm
â?¢ High Elasticity
â?¢ High Filtration capability
â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
â?¢ Large Area-to-weight ratio
â?¢ Self-bonding
â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
â?¢ Very good thermal insulation for apparel application
â?¢ Weak tensile properties
â?¢ Wicking Properties

Application of spun-bond nonwoven fabrics:
â?¢ Sanitary and Hygiene:
â?¢ Sanitary napkins,
â?¢ Baby diapers and
â?¢ Incontinence diapers
â?¢ Medical and Surgical:
â?¢ Gowns,
â?¢ Face masks,
â?¢ Caps,
â?¢ Drapes, etc
â?¢ Other Miscellaneous Applications:
â?¢ Filtration Material,
â?¢ Agriculture,
â?¢ Oilsorbents
â?¢ Hot-melt adhesives
â?¢ Headliners, etc

Meltblown non-woven fabric for medical masks

Technics:
Nonwoven
Supply Type:
In-Stock Items
Material:
100% Polypropylene, 100% Prolypropylene
Nonwoven Technics:
Melt-Blown
Pattern:
Stripes
Style:
Plain
Width:
43/44"
Feature:
Waterproof, Breathable, Anti-Static, Anti-Bacteria, Anti-Pull, Tear-Resistant, Fusible, Shrink-Resistant, Sheer, stain Resistant, Stretch, Water Resistant, QUICK-DRY, Wrinkle Resistant, wind proof
Use:
Home Textile, Hospital, Agriculture, Hygiene, Garment, Industry, Lining, Accessories, Costumes
Weight:
25gram
Place of Origin:
Jiangsu, China
Brand Name:
Perfectseal
Model Number:
PFT-METL BLOWN
Product name:
Meltblown Nonwoven Fabric
Application:
Facial Mask
Name:
100% PolyPROPYLENE Spunbonded Nonwoven Fabric
MOQ:
1 Ton/color
Colors:
OEM Color
Color:
White
Sample:
Freely
Advantage:
Competitive
Size:
Custom Size Accepted

[Product Information]
1. Dissolved non-woven mask filter
- 100% polypropylene
- White.
- 0.1 to 0.3 micron
- 20 to 50 gsm.
- TSI8130 paraffin oil, TSI8130 NaCl (0.1 - 0.4 micron)
- Roll.
- Foundation (210-260mm)

2. Spunbond non-woven fabric
- 100% polypropylene
- White.
- 10 to 60 gsm.
- Roll (100mm to 2400mm)
- Foundation (210-260mm)

[Product Rating]
Separation/MB / Basic Weight (g/m2) / Filtering Efficiency (%) / Pressure Loss / Test Method(mmAq)
BFE 95 20 85 2.2 NaCl, 32l/min
BFE99 22 90 2.5 NaCl, 32l/min
N95 25 95 11.0 NaCl, 85l/min
N99 25 99 13.0 NaCl, 85l/min
Repeater(Vibration Level 1) , P2 35 94 15.0/12.0 paraffin, 95 l/min
Repeater(Vibration Level 2) , P1 30 80 13.0 paraffin, 95 l/min
KF94 40 94 14.0 paraffin oil, 95 liters/min
KF80 30 80 12.0 paraffin oil, 95 liters/min
Instrument: TSI 8130, Particle size: 0.3 micron



Applications:
1. Filter material Gas filter: medical masks, room air conditioners filter material Liquid filter: beverage filtration, water filtration

2. Medical & Health Material Surgical Mask: inner and outer layers with spunbond material, in the middle is melt blown fabric.

3. Environmental protection material (oil absorbent material) Meltblown nonwovens used mainly PP material. It can absorb 17-20 times bigger than its own weight of oil, in environmental protection, you can make absorption felt, oil filter, etc., are widely used in marine oil spill, plant equipment ,sewage treatment and so on.

4.Clothing Materials meltblown nonwovens by the microfiber into a net, so its very soft feel. And the fabric of small aperture, high porosity, with very good wind resistance and good air permeability, light weight, is currently doing the best material for clothing insulation materials.

We are Please to offer 100% MeltBlown Non-Woven Fabrics to be used for Mask production on prior Booking.

GSM : 18 to 40.
Color : White.
Width : 175mm/177mm/260mm/265mm.
Discounts depend on Quantity & Payment terms .
Please contact us for further discussion.

Meltblown nonwoven fabric for FFP2 face masks or medicial protective clothing.

Material: Polypropylene
Weight (GSM): 25g
Width (CM): 175cm , 260cm or customized (1.6m)
Roll Length (M): 1000 Meter or customized
Color: White
Packing: Inner protective wrap & sealed with plastic bag or customiszed
Filter Efficiency: BFE99, PFE95, Paraffin Oil 95%
Minimum Order: 500kg
Production Capacity: 1500kg-3000kg/day
Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples

Non-toxic, Biodegradable, less odour.
Soft, Smooth, Stretchable, Excellent Breathability.

Meltblown nonwoven fabric for FFP2 face masks or medicial protective cloth.

Material: Polypropylene
Weight (GSM): 25g
Width (CM): 175cm , 260cm or customized (1.6m)
Roll Length (M): 1000 Meter or customized
Color: White
Packing: Inner protective wrap & sealed with plastic bag or customiszed
Filter Efficiency: BFE99, PFE95 (Paraffin Oil 95%+ if required)
Minimum Order: 500kg
Production Capacity: 1500kg/day
Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples

Non-toxic, Biodegradable, less odour.
Soft, Smooth, Stretchable, Excellent Breathability.

Item : PP melt blown nonwoven fabric
Material : 100% polypropylene
Nonwoven technics : Melt blown
Width : Can be cut into 17.5cm Or according client Request.
Basic Weight : 10-20-25-200gsm
Feature : Eco-Friendly, Anti-Pull,Non-toxic, Anti-bacterial, Recyclable, etc
Applicastions : Respiratory & Disposable Mask, etc
Certifications : SGS, FDA,ROHS
BFE : 99%

Buy Non-Woven Fabric Meltblown
Meltblown filter Polypropylene Meltblown nonwoven fabric

This fabric is made of Polypropylene
* The nonwoven can be used in mask or air filter.
* high oil absorbility.
* high air permeability, low air pressure.

1. Applied to different standars(BFE/FFP/N..)
2. Clean recycled & eco-friendly
3. Enka Technica Smart
4. 15 Tons a day
5. ISO manufacturer

Product Type:
Polypropylene melt-blown nonwovens
Material:
Polypropylene
Fabric Type:
round
HOTechnics:
melt blown
Feature:
Eco-Friendly, Other
Package:
Warpping film
Color:
white
Width:
According to order

Composition: 100% Polypropylene
Basis weight: 6-400gsm
Roll width: 4"--126"
Color: natural color
special treatment add high static
Certification: Nelson test
Applications: Air filtration material ,Dustproof masks materialm,medical mask material,Calendered wipe and oil absorbent material.