Supplier : House wiring, switch board, appliances installation, lightning, fans/ exhaust, all installation and modification in electrical system, fault finding, machine wiring and control panel design etc.
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
Vessels for TTO/STS EN590 available on regular basis
TERMS OF NEGOTIATION
INCOTERMS: TTO/STS
ORIGIN: EUROPEAN
INSPECTION: SGS, IQS,CIQ OR SIMILAR
INSURANCE: PAID BY SELLER, COVERING 110% OF SHIPMENT VALUE
ACCEPTABLE PAYMENT TERM: MT103/TT WIRE/USDT
COMMODITIES:
DIESEL FUEL EN590 USLD-10PPM/50PPM/500PPM GASOLINE
MINIMUM QUANTITY: 50,000 MT per Month
MAXIMUM QUANTITY: 400,000 MT Per Month
TTO/STS PRICE: USD $470 PER MT GROSS / USD 460 PER MT Net
NON-NEGOTIABLE TITLE/TANKER TAKE OVER PROCEDURE (TTO)/ SHIP
TO SHIP (STS)
1.The Buyer shall issue an Irrevocable Corporate Purchase Order (ICPO),
accompanied by the company's registration certificate and a Guarantee Letter confirming its intention to assume legal title of the product.
2.The Seller shall prepare and submit a draft Memorandum of Understanding
(MOU) to the Buyer. The Buyer shall review, countersign, and return the
executed MOU to the Seller.
3. Upon receipt of the countersigned MOU, the Seller shall provide the Buyer
with the following documentation for verification and confirmation:
A. Vessel Declaration
B. Bill of Lading
C. Loadline Report (Ullage Report)
D. Q&Q Analysis Report at Loading Port
E. Payment Invoice for Title Transfer Approval
F. Cargo Manifest
4. Upon verifying that the submitted documents, Buyer shall proceed to remit
the statutory governmental fee for Ttitle Transfer Approval in the amount of 95,000 via T/T wire transfer within two (2) international banking days. This
amount shall be deducted from the final purchase price.
5. If vessel rerouting is required, Buyer shall authorize the shipping company to
redirect the vessel to the Buyer's preferred port of discharge. The Seller shall
complete the transfer of product title to the Buyer through the relevant
governmental authority and shall issue the following documents to the Buyer:
Freshly dated Dip-Test Authorization (DTA)
Authority to Board (ATB)
Authority to Verify (ATV)
The Buyer shall then appoint SGS or an equivalent inspection agency to carry out the Q&Q analysis.
6. Upon successful completion of the dip test and once the vessel/tanker is
securely moored at the designated dock, the Buyer shall remit the remaining
balance of the purchase price via MT103 wire transfer. Following confirmation
of payment, the Seller shall issue the official Certificate of Ownership to the
Buyer, thereby finalizing the legal transfer of title. Trans-loading shall begin
immediately thereafter.
7. Trans-loading operations shall commence without delay upon confirmation of payment and title transfer.
8. The Seller shall release commissions and any agreed payments to intermediaries involved in the transaction within forty-eight (48) hours of receipt of full payment from the Buyer's bank.
7. Trans-loading commence immediately.
8. Seller will release payments to the intermediaries involved within 48 hours of receiving the Payment for the product from the Buyer's bank.
FOB TRANSACTION PROCEDURES
1. Buyer Issues ICPO, Company Registration Certificate and Tank Storage Agreement(TSA)for
seller approval.
2. Seller issues COMMERCIAL INVOICE (CI), STATEMENT OF PRODUCT AVAILABILITY, and
COMMITMENT to SUPPLY the available quantity in the Storage Tank and then program the
injection. THIS USUALLY DEPENDS ON THE LOCATION.
3. Buyer countersigns Commercial Invoice (CI) & Warning Letter with NCNDA/IMFPA signed
by all Buyer groups with commission structures.
4. Send the below proof of product (Documents) via email If Necessary.
Fresh SGS (Q&Q report) less than 48 hours.
Tank storage receipt. (TSR).
Authorization to verify (ATV).
Injection report Shore Tank (IR).
Certificate of Origin.
Product passport.
Authorization to Sell and collect (ATSC).
5. After the successful verification of the product existence, buyer order SGS to conduct their
Dip-Test in the seller tank on buyer expense and then issues buyer.
â?¢ Unconditional Dip Test Authorization (UDTA).
â?¢ ATSC authorization to Sell/Collect.
â?¢ Title of Ownership Certificate, (on seller expense).
6. Upon the successful dip test, Buyer presents their tank storage receipt (TSR), Seller issues
all export Documentation.
7. Buyer makes payment by MT103 or TT wire transfer for the total product and lifts the
product and seller pays all Intermediary involved on the transaction.
Supplier: Gas lighter, led screen protector ( not even in domestic ), refill paper cups, table runner, earing brass clamp, auto brass electric parts, cashew nuts, wire mesh, petha sweet, niwar, mohini powder, vermicompost, dry bath incubator, test tube plastic, sordium citrate tube, health care product, ornamental freshwater fish, safed musli, used polymer bag, cotton linter, auto hood cover,
areca plate, rice
We set-out to improve the quality and efficiencies of the home and apartment finishing process Delivering a higher quality finished product More cost effective than traditional methods Significantly faster, simpler and safer installation process Easy installation of pre-finished and pre-assembled door units Achieve an eco-friendly product made from recycled materials Built-in design tolerances to mitigate the necessity for accuracy Reduction in on-site labour - finishing, painting and tiling Elimination of finishing defects 100% termite resistant finishing material 100% Waterproof We achieved it!
The Inter-Join finishing system eliminates all of the quality & labour issues associated with the traditional finishing process
Eliminates: Skilled labour associated with hanging doors
Eliminates: Skilled labour associated with butt hinges recessed into doors and jambs
Eliminates: Labour associated with fitting locks
Eliminates: Mitre cuts required for skirting and architraves
Eliminates: Gap filling sealant around skirting and architraves
Eliminates: Cut-in painting around skirting/walls and architraves
Eliminates: Intricate tile cutting of floor tiles and addition of sealant around door jambs
Eliminates: Trimming door jamb & window reveals
Resulting in increased productivity & cost savings
THE INTER-JOIN DIFFERENCE
DELIVERING A HIGHER QUALITY FINISHED PRODUCT
SIGNIFICANTLY FASTER, SIMPLER AND SAFER INSTALLATION PROCESS
MORE COST EFFECTIVE THAN TRADITIONAL METHODS INSTALLATION READY, PRE-FINISHED, AND PRE-ASSEMBLED DOOR UNITS
ECO-FRIENDLY PRODUCT MADE FROM RECYCLED MATERIALS
BUILT-IN DESIGN TOLERANCES THAT MITIGATE THE NECESSITY FOR ACCURACY
REDUCTION IN ON-SITE LABOUR - FINISHING, PAINTING AND TILING
ELIMINATION OF FINISHING DEFECTS
MATERIALS ARE 100% TERMITE RESISTANT
MATERIALS ARE WATERPROOF
DOORS, SKIRTING AND ARCHITRAVES ARE FILM WRAPPED FOR PROTECTION
All Door Units are pre-finished, assembled and ready for immediate installation
Residential door manufactured from completely waterproof composite (WPC & Wooden) material
Residential doors are available in varying styles and designs
Commercial doors manufactured to precision from high quality Aluminium Composite Panels, entirely processed on our patented, computer operated door machine
Panel Board Accessories are under Brass Electrical and Wiring Accessories category products, We are manufacturing and exporting all kinds of Panel Board Accessories as per customer's specifications and requirement.
We manufacture and export Panel Board Accessories like Free cutting Brass 319 type BS 249 type.
If you need special size and configuration or if you would like to place an order for Panel Board Accessories or Brass Electrical and Wiring Accessories products with plating please Contact Us
An Identical Resin base mortar available only with us which can resist most of Acids, Alkalies, Solvents, Salts, Greases, at different Concentration & Temperature. It is very much Suitable for Refineries, Petro-chemicals, Fertilizers, Yarn Processing, Precious Metal Projects in awkward Chemical Conditions too. It can Resist Temperature upto 170C. It is generally used as Bedding & Jointing or as Jointing/Pointing Mortar in Acid Proof BRICKS / TILE / STONE Lining & Flooring work.
GL&M offers all aspects of construction and equipment installation, insuring the client of high quality, contract compliance, and timely project completion. With many successful projects, both domestic and world wide, GL&M can assist you in virtually all your design and construction requirements.
