The continuous gravity fan ofers ventilation at no cost per operation and with minimal maintenance along the ridge of industrial warehouseâ??.
Its structure makes it resistant to wind force and its design provides ventilation and airtightness.
DESIGN
â?¢ Structural frames @ 2.4m.
â?¢ It is manufactured in throats of 24 â??, 36â??, 42 â??, 48â??, 60 â??, 72â??, 144 â??or larger.
â?¢ Easels with gutters.
â?¢ Interior baes.
â?¢ Flashing according to type of cover.
â?¢ Start and end diverters.
â?¢ Galvanized protective mesh for birds.
â?¢ Made of galvanized steel, galvalum, pintro or kynar.
TECHNICAL INFORMATION
Excellent Diffusion, Natural Lighting and thermal insulation for industrial buildings.
4' x 8' size.
Hermetic system.
Installation on Roof Curb compatible with cover sheet and steel fall arrest mesh.
Uniform lighting throughout the ship.
Double layer of prismatic acrylic outside + new generation acrylic diffuser inside.
Hail resistant.
10 year warranty on materials.
Cover percentage required: 3%.
Certifications: Air, Water, Structural (AAMA/WDMA/ CSA 101 / I.S.2 / A440).
Real-time waveforms: Paw, Flow, Volume, EtCO2, SPO2
Optional: CO2, SPO2 (related parameters)
Loops: P-V, V-Flow, Flow- P
Trends: 1s, 5s,1min,10min, 30min, 60min
Tidal volume: 5 to 2000mL
PEEP/CPAP: 0 to 30 cmH2O
Oxygen: 21 to 100%
I:E ratio: 1:10 to 4:1
Inspiratory time (TI): 0.2 to 5 s
Flow trigger: 0.2 to 15 l/min
Pressure trigger: -0.5 to -20cmH2O
Pressure control: 5 to 90 cmH2O, added to PEEP/CPAP
Pressure support: 0 to 90 cmH2O, added to PEEP/CPAP
Pressure ramp: 0 to 2s
Expiratory trigger sensitivity (ETS): OFF, 5 to 90 % of inspiratory peak flow
Peak flow Spontaneous: > 210 L/min
Input voltage: 100 to 240V ~ �?�±10 %, 50 / 60 Hz AC or 24 VDC�?�±10 %
Power consumption: 50 W typical
Protection class: Class I
Backup battery: batteries(5200mAh each)/ hot swappable
Oxygen supply: 280 to 600 kPa (41 to 87 psi), 120 L / min
Low pressure: oxygen �¢?�¤15 L / min, max. 600 hPa for low pressure
Operator-adjustable: Low/high minute volume, low/high pressure, low/high tidal volume, low/high rate, apnea time, low/high oxygen
Optional: low/high CO2, low/high SPO2
Special alarms: Oxygen concentration, disconnection, loss of PEEP, exhalation obstruction, flow sensor, power supply batteries, gas supply
Loudness Adjustable: 1 to 9
Event log: Storage and display of up to 1000 events with date and time stamp
Weight: < 45.3 kg
Dimensions(WxHxD): Approx. 600x402x415mm
Power supply
Voltage: 100~240V
Frequency: 50HZ, 60HZ
Input Power: 80VA
Internal Power: DC12V�¯�¼? 4AH
Packing Size
Main engine: L 560 * W 560 * H 605 mm
G.W.:35kg
Air Compressor: L 683 * Wv687 * H 1140 mm
G.W.: 100kg
VG70 is one of the modern ICU ventilator machines with a unique metal-based, autoclavable, heated exhalation valve comprised of a built-in flow sensor the non-consumable design
Functions include Apnea ventilation, smart suction, manual breath, Insp/Exp Hold, ETCO2 measurement, Nebulization, waveform freeze. It has also optimal patient-ventilator synchrony which increases patient comfort.
Comprehensive lung mechanics monitoring
The minimum tidal volume of 20ml in VCV mode
It has 72 hours trend with 30 seconds of resolution
Tube compensation, leak compensation & auto circuit compliance compensation
Compact design, a built-in battery with 2 hour battery life.
Upgraded ventilation system software, with an available USB port
