It is mainly used in making polyester, polyester resin, hygroscopic agent, plasticizer, surfactant, synthetic fiber, cosmetics and explosives, as solvent for dyes/inks, antifreeze for engine, gas dehydrating agent, manufacturing resin, wetting agent for cellophane, fiber, leather and adhesive. It can produce synthetic resin PET, fiber grade PET namely polyester fiber, bottle chip grade PET for making mineral water bottle, etc. Also can produce alkyd resin, glyoxal, etc., also used as antifreeze. In addition to being used as anti-freeze agent for automobile, it is also used for conveying industrial cooling capacity, which is generally called refrigerant carrier.
They are clear water-white liquids, chemically stable and non-corrosive and possess a mild odour
White spirits and mineral spirits blends are used as solvents or diluents in thinners for paints and varnishes, paint driers, colour printing of fabrics, metal cleaning and degreasing, preparation of furniture, shoe and floor polishes, dry cleaning formulations and in the rubber industry.
13%-15%
Penetration Worked 60
GB/T 269
240-250
Dropping point min
GB/T 4929
135-140
Copper Corrosion
GB/T 7326
pass
Base Fluid Properties
Base Fluid Type
Mineral
Viscosity @40 cst
GB/T 265
185
Viscosity @100 cst
GB/T 265
12
Pour Point
-20
Propertie
Great in anti-water;
Better mechanical invariability;
Better anti-rust;
Good oxidation stability;
Can take place of calcium base and sodium base greases.
This product is made of refined base oil, thickened by fatty acid metallic soap thickener, added with many kinds of additives, for instance, abrasion and extreme pressure resisting, anti-corrosive, antioxidant and rustproof etc.
Synthetic technology motor oil specially designed for modern high performance engine with gasoline direct injection (GDI and Turbo-GDI) systems. Developed by latest evolution technology platform EVOTEC fortified with SMART Molecules that improve engine cleanliness and prevent low-sped pre-ignition (LSPI). Outstanding low friction and heat resistance enhance acceleration response, wear prevention and maintaining engine power for better drivability in all situations.
APPLICATION
Designed for high performance gasoline engine both GDI and Turbo-GDI.
Recommended for passenger car, sport car and SUV equipped with start-stop system.
Suitable for all port fuel injection (PFI) gasoline engines running with unleaded gasoline (ULG) and ethanol blended gasoline (E10, E20 and E85).
KEY FEATURES
Enhance excellent engine cleanliness especially in piston and help reduce LSPI occurrence in Turbo-GDI engine by SMART Molecules.
Improve superb engine protection against wear and prevent timing chain elongation for maintaining maximum engine performance.
Outstanding low oil friction with high heat resistance by EVOTEC technology for superior acceleration responsiveness and reduced oil consumption.
Better oil degradation resistance and engine sludge prevention through oil drain intervals.
Product Properties for AdBlue as per the revised ISO22241 standard.
Urea 32,5 % (approximate) solution dissolved within deionised water. As required by SCR equipped vehicles under the provisions of Emissions standards Euro IV (Euro4), Euro V (Euro5) & Euro VI (Euro6).
Urea Content 31.8 33.2 % by weight
Density at 20C 1.0870 1.0930 g/cm
Refracting Index at 20C 1.3814 1.3843
Alkalinity as NH3 0.2 %
Biuret 0.3 %
Aldehyde 5 mg/kg
Insolubles 20 mg/kg
Phosphate (PO4) 0.5 mg/kg
Calcium 0.5 mg/kg
Iron 0.5 mg/kg
Copper 0.2 mg/kg
Zinc 0.2 mg/kg
Chromium 0.2 mg/kg
Nickel 0.2 mg/kg
Aluminium 0.5 mg/kg
Magnesium 0.5 mg/kg
Sodium 0.5 mg/kg
Potassium 0.5 mg/kg
Technical Grade and Pure Food & Pharma Grades available.
Iso Amyl Alcohol CAS NO: 123-51-3
Isoamyl alcohol is a colorless liquid with the formula (CH CHCH CH OH. It is one of several isomers of amyl alcohol. It is an ingredient in the production of banana oil, an ester found in nature and also produced as a flavouring in industry
