Features
- QSFP MSA compliant
- Four independent full-duplex channels
- Supports 103.1Gb/s aggregate bit rate
- Up to 100m OM4 MMF transmission
- Operating case temperature: 0 to 70ï?°C
- 4x25G electrical interface (OIF CEI-28G-VSR)
- Single 3.3V power supply
- Maximum power consumption 2.5W each terminal
- RoHS-6 compliant
The VW321A series wireless module provides the capability of a short range, reliable wireless point-to-point, point-to-multipoint and mesh network RF data communications link. They can be used in a variety of data communications applications that require a simple to use invisible data link.
The wireless modules are designed to operate in the unlicensed ISM frequency band (315MHz/433MHz/868MHz/915MHz ISM band) and are therefore acceptable for use in many countries.
Cybervision CHM-4K series Ultra HD-SDI optical transceiver consists of optical transmitter CHM-4KT and Optical receiver CHM-4KR for transmitting 1 channels 4K ultra HD-SDI signal , or 4 channels 3G ultra HD video, and downward compatible with SD-SDI with bit rate of 143, 177, 270, 300, 1485Mbps etc.
With circuit reducing the signal jitter at CHM-4KR, it can deal with the distorted signal well, it can provide more than 120m automatic balance for 3GMbps signal, more than 250m for 270Mbps signal.
With built-in distribution amplifier, CHM-4KR provides 2 channels output.
CHM-4K supports SMPTE178 standardpassed the test of SDI pathology.
Features:
1. Supports SMPTE424M, SMPTE292M, SMPTE259M
2. Supports 3G-SDI/HD-SDI/SD-SDI/DVB-ASI
3. The best solution for live casting by connecting with 4 channels 3G-SDI
4. With cable equalize at the input/Output, it can make up the loss of cable transmission
5. With circuit reducing the signal jitter, it can deal with the distorted signal well. Input/output cable transmission distance can be up to 120m@3G (BELDEN8281 cable)
6. LCD at both transmitter and receiver show working status, it is convenience to operate and maintain:
1) Optical interface type;
2) laser working wavelength;
3) transmitting/receiving optical power;
4) working temperature;
5) input/output working status of each channel signal;
6) voltage of dual power supplies for main board;
7. With clear working status, there are LED indicators on panel for input SDI signal, optical signal, power supply.
8. Supports SMPTE178 standardpassed the test of SDI pathology
9. Dual power suppliers can be selected, which can supply power independently, backup redundantly
10. Network management can be selected, support SNMP and web monitoring
Multi-Function Digital Audio Optical Transceiver
Introduction
Cybervision CA021 Multifunction digital audio optical transceiver consists of digital audio transmitter CAT and digital audio receiver CAR for transmitting 2 channels analog audio and 1 channel digital audio AES/EBU in high-fidelity. In the process of transmission, analog audio convert to digital audio via A/D, and transmit it in digital method. At the receiving end, it outputs 2 channels analog audio and 1 channels AES/EBU digital audio.
Multi-channels audio optical transceiver with compatibility with analog and digital can be customized.
Features:
1. Be able to transmit analog audio, and digital audio also, automatically identify and switch digital and analog audio at input end, digital signal is priority.
2. Output digital audio and analog audio at same time
3. 24 bit digital decode
4. Audio output balance/unbalance automatically convert; ESD protection, it is more safety and reliable for using
5. LCD in both transmitter and receiver show working status:
1) Optical interface type;
2) laser working wavelength and optical power of transmitter
3) receiving wavelength and optical power of receiver
4) working temperature of optical transceiver and optical modules;
5) Level working status of each channel input/output audio;
6) voltage of dual power supplies for main board;
7) At the optical receiver, the working status and optical link loss of transmitter can be checked
6. System topology can be point to point, point to multi-point
7. Large analog audio dynamic scaleï¼?Max. input/output audio can be up to +18dBm or +24dBm
8. There are LCD for monitoring.
9. There are LED indicators on panel for input/output audio, optical signal, inner statusand, power supply.
10. Power supply support hot back, how swap.
