Latest version of biomass gasification power plant with zero pollutants emission. High efficiency and super clean. Burn wood chips and other biomass fuel directly,or fuel pellet.
Produce combustible gas as clean as natural gas. The gas can be used to generate power or used as natural gas.
One unified model: 1000kw. Large capacity can be achieved by simply adding more 1000kw modules.
We would like to inform to you that we are planning to sale complete plant equipment and machinery of our 6mw 5°c
6 mw turbo-generator (triveni make f r -13)
Power :6000
Year of manufacturing:2003
I / l steam pressure :65 kg/cm²
I / l steam temperature :485°c
Exhaust steam pressure :01 kg/cm²/ata
Bleed steam pressure :3.5 kg/cm²
Turbine speed :8280 rpm
Out put speed :1500 rpm
Trip speed range :9145 to 560 rpm
1st critical speed:3200 to 3600 rpm
Oil :Servo prime-68
Triveni gear box
Model no.:0560
Gear ratio :5.52
Rated input :8280 rpm
Order no.:3730
No. Of teeth gr/pin :138 / 25
Oil :Iso vg-46
Bhel generator
Frame :G651048
K.V.A:7500
Kw :6000
Rpm:1500
P.F :0.8 lag
Stator volts :11000
Stator amps :394
Exct volts :122
Exct amps :387
Synchronous generation
Connection :Star
Inlet temperature :50 °c
Ambient temperature :40 °c
The biomass gasifier and biomass gasification power plant we supply here is using 100% agricultural and forest waste as fuel. The biomass gasifier (reactor) can convert the above mentioned biomass fuel into syngas for thermal application and power generation. The company has developed and commercialized a wide range of biomass gasifier ranging from 50kw output to 1200kw output. The biomass gasifier and gasification system is applied to biomass power generation plant, biomass centralized gas supply for cooking and heating. The biomass gasifier and biomass gasification system can also be applied to replacing LNG and diesel oil for thermal application and baking & drying agricultural products. Our equipments have been serving in rice mill, timber mill, food industry (especially nuts), village, and Tobacco Company safely and reliably. Both downdraft fixed bed gasifier and fluidizedbed gasifier is available. If customers have special requirements, unique design, manufacture and delivery can be made on your demand.
Applicable Fuel for biomass gasifier gasification system:
Agricultural waste and residua,Wood waste and residua,Nut shel,Other waste and residua.
The whole gasification process is environment-friendly with low NOx in the engine exhaust and nearly no sulfur oxide emission (SOx). H2S is very less, which usually can be ignored.Welcome to contact with us for more information.
Technical Parameter for1200kw biomass gasifier - biomass gasification power plant
1. Gasifier Type: Fluidized bed biomass gasifier
2. Gasifier Gas Output: 4500Nm3/hr
3. Gasification Agent: Air
4. Biomass Fuel Consumption: 1.8-2.2Ton/Hr
5. Biomass gas heat value: Normally 3000-6000KJ/Nm3
6. Application: for power generation or for thermal application.
The biomass gasifier and biomass gasification power plant we supply here is using 100% agricultural and forest waste as fuel. The biomass gasifier (reactor) can convert the above mentioned biomass fuel into syngas for thermal application and power generation. The company has developed and commercialized a wide range of biomass gasifier ranging from 50kw output to 1200kw output. The biomass gasifier and gasification system is applied to biomass power generation plant, biomass centralized gas supply for cooking and heating. The biomass gasifier and biomass gasification system can also be applied to replacing LNG and diesel oil for thermal application and baking & drying agricultural products. Our equipments have been serving in rice mill, timber mill, food industry (especially nuts), village, and Tobacco Company safely and reliably. Both downdraft fixed bed gasifier and fluidizedbed gasifier is available. If customers have special requirements, unique design, manufacture and delivery can be made on your demand.
Technical Parameter for 100kw downdraft biomass gasifier gasification power plant
1. Power Plant Scale: 100kw
2. Engine & Generator Type: gas engine and generator using 100% biomass gas as fuel
3. Rotary speed of engine: 1000Rpm
4. Gasifier Type: Fixed bed downdraft biomass gasifier
5. Gasifier Gas Output: 375Nm3/hr
6. Gasification Agent: Air
7. Gasifier Outlet Gas Temperature: 700-800 degree
8. Gas temperature after Cooling: Below 45 degree
9. Biomass Fuel Consumption: 200-220KG/Hr
10. Biomass gas heat value: Normally 3000-6000KJ/Nm3
11. Application: for power generation or for thermal application
12. Site area requirement: about 50 square meters.
The whole gasification process is environment-friendly with low NOx in the engine exhaust and nearly no sulfur oxide emission (SOx). H2S is very less, which usually can be ignored.
13 MW Biomass Based Power Plant located at Shendra MIDC, Aurangabad, Maharashtra, India. The plant was commissioned in Dec 2008 and plant operation has been discontinued since June 2015 and major overhaul of turbine and auxiliaries were completed in FY 16.
The power plant utilises Biomass (Chipped Cotton, Maize Bhutta, Soya Husk, Bagasse) or Coal as fuel.
Major Equipment details - 60 TPH Boiler - Make - Cheema, 13 MW Turbine - Make - Triveni, 16250 KVA Generator - Make - TDPS-ToyoDenki, 15000 KVA Generator Transformer (GT) Make - IMP, 20 TPH Biomass Handling system - Make - Hyquip systems, 18 TPH Coal Handling system - Make - Hyquip systems, Ash Handling, 40 MT Weigh Bridge Make - Sansui India, 500 KVA Emergency DG Set etc.
Further details about the plant and selling option shall be provided to interested buyers if required.
For more details please contact - Biswajit Banerjee, +91 8584008276
Power generation by using biomass gas from rice husk, wood chips, saw dust, coconut husk, bagasse, straw and crop stalks can not only save electricity expenses in the production cost for rice mills and timber processing mills, but can also get benefits from the selling of surplus electric power to the power grid. Our biomass gasification equipment enjoys high conversion efficiency, by taking rice husk as an example, each kwh power generation consumes only 1.6~1.8kg rice husk, and the unit fuel consumption will be lower if wood chips or crop stalks are used. Water used for gas cleaning and cooling can be reused in a circulating way after being treated through water treatment facilities such as sediment ponds. It creates no environmental pollution and little make-up water will be needed. The water pond for each unit of 200kw plant only covers about 50m2 .The engines group and electrical equipments should be put indoors, and the other equipments could be put outdoors. The construction area for each 200kw generator set is approximately 40~50m2. The full set of equipment consumes only 5~8% of the generated power. Therefore, such a project is an ideal one with significant benefits for the area where there is a lot of discarded biomass resources but lack in electric power supply or with higher electricity expense. In general, the investment in the major equipment can be recovered from power generation benefits within the first two years. The equipment can be safely and reliably operated with operational technology. Its easy to be mastered by workers. The maintenance and repair work is similar to ordinary diesel generators.
The biomass gasifier and biomass gasification power plant we supply here is using 100% agricultural and forest waste as fuel. The biomass gasifier (reactor) can convert the above mentioned biomass fuel into syngas for thermal application and power generation. The company has developed and commercialized a wide range of biomass gasifier ranging from 50kw output to 1200kw output. The biomass gasifier and gasification system is applied to biomass power generation plant, biomass centralized gas supply for cooking and heating. The biomass gasifier and biomass gasification system can also be applied to replacing LNG and diesel oil for thermal application and baking & drying agricultural products. Our equipments have been serving in rice mill, timber mill, food industry (especially nuts), village, and Tobacco Company safely and reliably. Both downdraft fixed bed gasifier and fluidizedbed gasifier is available. If customers have special requirements, unique design, manufacture and delivery can be made on your demand.
Applicable Fuel for biomass gasifier gasification system:
Agricultural waste and residua,Wood waste and residua,Nut shel,Other waste and residua.
The whole gasification process is environment-friendly with low NOx in the engine exhaust and nearly no sulfur oxide emission (SOx). H2S is very less, which usually can be ignored.Welcome to contact with us for more information.
Technical Parameter for 400kw biomass gasifier - biomass gasification power plant
1. Gasifier Type: Fluidized bed biomass gasifier
2. Gasifier Gas Output: 1500Nm3/hr
3. Gasification Agent: Air
4. Biomass Fuel Consumption: 520-720KG/Hr
5. Biomass gas heat value: Normally 3000-6000KJ/Nm3
6. Application: for power generation or for thermal application.
Power generation by using biomass gas from rice husk, wood chips, saw dust, coconut husk, bagasse, straw and crop stalks can not only save electricity expenses in the production cost for rice mills and timber processing mills, but can also get benefits from the selling of surplus electric power to the power grid. Our biomass gasification equipment enjoys high conversion efficiency, by taking rice husk as an example, each kwh power generation consumes only 1.6~1.8kg rice husk, and the unit fuel consumption will be lower if wood chips or crop stalks are used. Water used for gas cleaning and cooling can be reused in a circulating way after being treated through water treatment facilities such as sediment ponds. It creates no environmental pollution and little make-up water will be needed. The water pond for each unit of 200kw plant only covers about 50m2 .The engines group and electrical equipments should be put indoors, and the other equipments could be put outdoors. The construction area for each 200kw generator set is approximately 40~50m2. The full set of equipment consumes only 5~8% of the generated power. Therefore, such a project is an ideal one with significant benefits for the area where there is a lot of discarded biomass resources but lack in electric power supply or with higher electricity expense. In general, the investment in the major equipment can be recovered from power generation benefits within the first two years. The equipment can be safely and reliably operated with operational technology. Its easy to be mastered by workers. The maintenance and repair work is similar to ordinary diesel generators.
