Gluer Machine Applicable Paper Width: 1,400-2,300 mm
Configuration:
1. The designed maximum operating speed is 220 m/min;
2. The glue roller and meter roller adopt modular and built-in design, they can be installed and removed from the operation side to facilitate repair and maintenance;
3. A pressure arm locking mechanism is provided to ensure stable and reliable operation performance of paper pressing roller (touch pressing plate) under high-speed operation state;
4. The gap between the glue roller and the meter roller can be automatically adjusted according to the speed, paper material and flute type;
5. The touch pressing mechanism for glue application is a paper pressing roller, and the gap between the paper pressing roller and the glue roller can be adjusted electrically to facilitate rapid changeover for processing cardboards with different flute types;
6. The glue pan is lifted pneumatically to facilitate cleaning. There are glue blocking plates installed at both ends of the glue pan to well prevent glue from splashing from the shaft ends during high-speed operation of the glue roller and meter roller;
* Separate motor drive, frequency conversion control.
* Glue roller surface is treated by special mesh snicked and chromeplated. Glue gelatinizing roller and pressed roller is exactitude milled and chrome plated.
* Pneumatic control the dual paper pressed roller system, smart and convenient.
* Auto-cyc feeding glue, prevent glue liquid from depositing.
* Matched warm-up set, this will speedup glue liquid burnted.
Advantages:
High protective level of gasket—ip66
Intelligent dozing and mixing system bases on germany technology
Intelligent control system— high precision & stability, easy operation
Automatic water cleaning---environment-friendly, low cost
Multifunctional sealing: 2d/3d work parts
Technical data
Mixing tip moving range: length: 0-2500mm width: 0-1250mm height: 0-200mm
Sealing strip width: 5mm-35mm
Sealing speed: 0-30m/min
Working temperature:-15?- +45ºc
Multicomponents-- 2 components/ 3 components
Raw materials: polyurethane, silicones, epoxy resins and other polymer reaction substances
Applications:
Electric panel, rittal cabinet, explosion-proof cabinet, network cabinet, electronic products, automotive products, purification products, lamps, lanterns and other industries
Semi-automatic high speed hot melt glue box packing machine
Main parameter
Lbd-110 semi-automatic high speed hot melt glue box packing machine
Power220v/50h
Pressure0.4mpa
Total power2.4kw
Range of packing size, l*w*h(80-300)*(40-200)*, 15-150, mm
Speed90-110 boxes/min
Working temperature180-200â°c
Glue tank capacity1.5kg
The machine size, l*w*h 3200*800*1500mm
Weight 200kg
Introduction (easy operation )
Lbd-lbd-rt1011-2 semi-automatic hot melt glue box packing machine with air cleaner is suitable for all cartons which need hot glue on both sides, such as coffee, curry, biscuits, tissues and soap.After manual loading, place the box on the conveyor belt, automatic transportation, glue and sealing box.
Main features
1. Plc operate machine, which can save a lot of time.No experience will be used.
2. Processing capacity 90-110 boxes/min.With equal time and labor, productivity can be increased by 3-5 times.
3. Glue on the point, not brushed, not spillage.Compared with the manual sealing box, the amount of glue used is reduced by 2/3.
4. Conveyor belt, sealing box square, not deformation, not card paper, lower production cost.
5. The fuselage is made of aluminum alloy, not rusty and easy to maintain.
6. The bottom is equipped with pulleys, which can be moved at any time convenient for use.
Applications
Coffee boxes , curry boxes , biscuits boxes , tissues boxes soap boxes , etc. .
All automatic transportation, automatic glue and automatic sealing box.
1:this device adopted import PLC,the complete machine realizes machine electric integration autocontrol.From the manipulator divide labels advance,enter the pot,taking label,spread glue,paste the label,divide cutting to enter pot,enhance the production efficiency greatly.enter paper take label adopted the most advanced feida facilities,make the label high-accuracy location;solve the double pieces problem fundamentally.
2:rise and down the large capacity label storeroom automatically,adopted import shift sensor that control material level accurately,label store volume maximum can reached 2500 pieces
3:the module model quick replacement mold head,make the device replace mold only need 10 minutes.
4:automatic circulate type rubber supply pump,glue store volume can reached 20KG,the device can working 30 hours continuous no need add rubber liquid,when the end of operation the CIP clean system automatically and make the device filled with water and finish cleaning automatically under the circumstance of no need to dismantle the rubber box.
5:principal axis transducer speed mix,can adjust speed watonly itself according to potí»s diameter.
6:operating board equipped with function choice key,the operator can switchover the function among of paste label and pipe cutting,also can paste label and cut pipe at the same time.
Main technical parameter:
Applicable pot type: 80mm-200mm
Applicable label height: 50mm-400mm(after divide cutting)
Label precision: +/-0.5mm
Production efficiency:2000pot/hours(caculate by divide cut 4 pots one time)
Total power:1.5 KW
Presure:0.5 Mpa
Machine weight:850KG.
