MODERN Series Induction Heaters carry the most advanced transduction control technology. By long distance induction, electric power is transmitted into heated conductors efficiently and the temperature of conductors is quickly up. The series is the best equipments to remove collision stress from thick metals.
The heating way is direct, no fire, safety, efficient and green. It has been the best heating equipments for auto frame, chassis, connection plate, etc. before and after straightening. It avoids the hidden danger of fire heating.
The heating equipments are equipped with handle torch of different shapes, so more efficient.
Our SPQ-10 has air conditioning water cooling system.
SPQ-06 has water cooling system.
SPQ-1.5 has air cooling system and special for 4S car shop.
Specification:
SPQ-1.5 Dimension300mm*300mm*220mm
Input Voltage2phases 220V
Output Power1.5KW
Tube Length6m
Cooling SystemWater cooled
Weight12kg
Model
SpecificationSPQ-06
Input Voltage1 Phrase 220V/50~60HZ
Input Power 6KW
Water Pump Power0.33KW
Load duration rate60%
Host Volume900mmX830mmX590mm
Weight120KG
Hand lead line /weight¦µ5.5X20CM/2KG
Hand lead line extension6M
Water Tank 25L
Cooling systemAir Condition Water cooled
Circulation Period>60Mins
1.Fast, effortless removal of glass, emblems, bonded body components, rusty bolts and much more.
2.Flameless heat reduces the need for torches, solvents and abrasives.
3.Less flame and solvents reduces potential safety hazards and insurance rates.
4.Only heats metal objects, enabling it to be used in or near heat-sensitive areas.
5.Wide range of heating inductors for increased versatility.
6.Easy-to-read heat output meter to quickly verify induction heat.
7.Output isolation transformer provides the safest possible operation.
Model: spq-1.5
Dimension: 300mm*300mm*220mm
Input: /input voltage: 2phases 220v
Working frequency: auto frequency locking and tracking.
Output power: 1.5kw
Tube length: 6m
Cooling system: air cooled
Working cycle: >45 minutes
Weight: 12kg
Model: spq-1.5
Dimension: 300mm*300mm*220mm
Input: /input voltage: 2phases 220v
Working frequency: auto frequency locking and tracking.
Output power: 1.5kw
Tube length: 6m
Cooling system: air cooled
Working cycle: >45 minutes
Weight: 12kg
MODERN Series Induction Heaters carry the most advanced transduction control technology. By long distance induction, electric power is transmitted into heated conductors efficiently and the temperature of conductors is quickly up. The series is the best equipments to remove collision stress from thick metals.
The heating way is direct, no fire, safety, efficient and green. It has been the best heating equipments for auto frame, chassis, connection plate, etc. before and after straightening. It avoids the hidden danger of fire heating.
The heating equipments are equipped with handle torch of different shapes, so more efficient.
SPQ-1.5 has air cooling system and special for 4S car shop.
SPQ-06 has water cooling system.
Our SPQ-10 has air conditioning water cooling system.
It has a very high degree of efficiency and is water-cooled using a closed compressor-powered system. Through the use of automatic control monitors, the power output remains constant during the heating process.
The SPQ -06/10 is designed for heavy work demanding fast and thorough heating of the material, for example, for straightening of chassis, and for coarser parts and axles. This machine is convenient for heavy-duty vehicle repairs.
SPQ-06/10 Induction Heater is the top efficient equipment used for repairing heavy duty and car chassis. When using our induction heater, the temperature can be up to 600¡ãC within seconds,which can soften 5mm plate within 8 seconds and soften 8mm plate within 12 seconds. The induction heater can work over 60 minutes constantly, which can save your time and improve working efficiency with a steady performance.
bolts heater 1.2311(4)-24.5X700
Main: hydraulic machinery and components, hydroelectric generating units; coal-fired generating units; generating units; electrical and electronic products processing; mechanical parts processing. Mainly engaged in the power industry host (steam turbine, water machine, boiler, turbine) accessories, spare parts, spare parts, auxiliary equipment and environmental protection equipment. Deyang YOYIK supply power plant, steel accessories are as follows:
Yoyik can offer many spare parts for power plants as below:
#DF- bolts heater 1.2311(4)-24.5X700-DF
rotational speed sensor CS-3-M18-L60
Laser sensor JGS-600
RTD-Resistance Temp. Detector WZPM-001-A3E90-5000
ACTIVE SPEED SENSOR CS-3-M16-L140
probe 2401B-0.01
Display board ME8.530.016 V2-5
LVDT transmitter XCBSQ-02/400-01-02
Eddy Current Sensor PR6422/101-131
FOXBORO Card FBM237
lockout relay GRUS-11T-5H1D-4H3D/110V
thermal resistance WRKK2-2804
SPARE PART SET FOR HYDRAZINE FLOW CELL A-83590021
COAL FEEDER CONTROL BOARD D31705 - 1
LVDT sensor 4000td-xc3
Transmitter GP2A2B21AB4M5D1
Flame TV lens FD-IR-ST
Pressure Switch BH-209041-209
Speed Sensor ZS-04-150-3000
thermocouple WZPK2-333
position sensor price 191.36.09.09
Module MAU 1C31181G01 + 1C31179G01
Eddy Current Sensor PR6423/000-011
cylinder position ZDET400A
level switch YKJD220-500-420-100
HP LVDT SPRAY POSITION SENSOR BY PASS 191.36.09.03
Bolt electric heating rod ZJ-20-440
Connection Cable TM301-A02-B00-C00-D00-E00-F00-G00
pressure switch types RC861CZ090HYR 24VDC
pressure transducer price 54NN-K118-N4-B1A
flowmeter TZ37
Sensor DF311180-90-08-02
Bimetallic thermometer WSS-411
LVDT 0508.902T0201.AW020
Soundwave sensor DZXL-M
Soundwave sensor DZXL-V
Float Switch Z1201030
bolts heater 1.2311(4)-24.5X700
Water tank imported sus304 2b stainless steel
External shell imported nacre white armor plate
Insulating layer 50mm-60mm polyurethane foamed
Tank diameter 420mm=460mm
Specification 15 18 20 24 30 pieces
Structure outlet holes on sides; electric heater and water inlet and outlet holes and exhaust hole at the lower part
Bracket material bracket made of premium cold roll with plastic spray
Fastening piece stainless steel screw
Seal macromolecule silicone rubber
Glisten obliquity 45¦
Heated temperature 45-95¦
Vacuum tubes borosilicate gla-1500mm
58-1800mm
1) stable and reliable performance and well wind resistance
2) vacuum heat-collecting tubes at high temperature
3) dual-purpose brackets for both flat and inclined roof
4) meeting the demand of well-to-do families
5) economical goods
Specifications:
1) thickness of bracket: 1.5mm
2) heat-pipe vacuum tube: 47 mm x 1.5m
3) inner tank: sus304-2b food grade stainless steel
4) outer tank: steel (spray-paint and looks like china paint)
5) capacity: 98/110/130/150/180/210/240/300/300l
6) insulating layer thickness: 55 - 60mm
7) inner tank thickness of: 0.4 - 0.5mm
8) tank diameter: 460mm
9) pressure: 0pa
10) heat preservation: 72hrs
11) hail resistance: 25mm
Collector:47-1500, 58-1800, 70-2000 the new unit triplet gradation membrane collector vacuum tube is efficient in heat absorption and temperature rising.
Inner tank material: sus304-2b imported food-grade stainless steel.
Outer covering material: imported high-quality aluminum-zinc coated steel plate and imported fluorine carbon plate.
Heat insulating layer: 50-65mm polyurethane integral pressure foaming.
Bracket material: high-quality aluminum-zinc coated and plastic-sprayed bracket, all kinds of colour is available, the design is more reasonable, the color is more beautiful, it can be fixed flatly or slantly.
Carbon size: 180*50*50cm for twenty-tube solar water heater.
Supplier: Mosquito coil, aerosol insecticide, mosquito liquid, mosquito mat and heater, laundry detergent sheets,air freshener spray, deodorant body spray,baby diapes,spray paint,mosquito repellent cream,cockroach baits and mouse glue trap and other daily used products. Services: Buyer:
