Kimpex Pvt. Ltd.

FUJI developed the first infrared gas analyzer in Japan to use mass-flow sensors. Since then, we have supplied customers with various types of gas analyzers to support environmental preservation and control efforts. These efforts include measurements of atmospheric pollution and detection of low density of SOx and NOx, generated by incinerating facilities and boilers. FUJI's gas analyzers are widely used to monitor the atmosphere to help maintain a cleaner natural environment.

All specification and requirement are conformity with oiml r31 international gas meter standard.

The packing is one carton has six gas meters; 20kg

Introduction:
Equipped with our companyí»s code controller, base meters are bought abroad to realize the prepaid and control functions, thus to achieve the automatic control of different functions of this new type of gas meter.
Range of application:
This product can be applied to the measurement of gas, natural gas, liquefied petroleum gas and other non-corrosive gases in the city.

Main features:

Automatic prepaid function: charging before using of it, water meter residual capacity= the original gas + newly purchased gas
Auto-control function: switching the gas path automatically according to the payments and gas situation.
Real time computation function: measuring on the real time and display the stock value, closing gas source automatically when the purchased gas is used up.

Power-down memory function: solid state recorder is internally installed and the data will be permanently preserved.

Status display function: displaying the amount of newly charged gas, the remaining stock and cumulative use, as well as low-voltage state etc.

Prompting function: warning when the remaining gas is used to the set value or other functions are out of work.

Overdrawing function: able to set a certain overdraft gas according to the user needs

Automatic alarm function: when the voltage is lower than certain point, alarm system will be operated and the battery must be replaced within 72 hours, otherwise, it will automatically shut down the gas resources.
Anti-gas-larceny function: shut down the gas supply automatically when there are theft of gas or illegal operations
Technical parameter:
1ú¬base meter operation criteriaú¦gb/t6869 q/ofd.001-2007 jjg577-2005
2) current working voltageú¦3.00v
3ú¬cuiescent currentú¦<=12va
4) data holdú¦>=8 years
5ú¬life span of valveú¦switching frequency more than 5000 times
6ú¬accuracy degreeú¦level b
7ú¬four anti-functionú¦anti-attack, waterproof, anti-smoke, anti-knocking

Diaphragm gas meter
Description
Model SY-RQM Diaphragm type gas meter applies to measure the consumption of coal gas, liquefied petrol gas and natural gas. It can also be used to measure the flow rate of are and other gases.
Features
New design, Exquisitely-made; High sensitivity, Accurate metering, Easily-installed and Maintained; quipped with anti-reverse facilities, Adopted advanced surface treatment, Corrosion-resistant, Long operation life, The shell is cast with aluminum-alloy, diaphragm structure. Big digital wheel equipped. The casings for SY-RQM-1.6 & SY-RQM-2.5 are identical

Residential Diaphragm Gas Meter
ITRON (MID approved)
Steel Version
Basic Features
3 Compact size: 1.2 dm cyclic volume
Range: G1.6, G2.5, G4
EN 1359 & O.I.M.L compliance
Design
Long -term accuracy & safety
Ready for remote reading & data management
Quality
World-class, ISO9001 certified, European Engineering and
Manufacturing

APPLICATION
The ITRON, with an installed base of over 30 million units, is a
versatile meter that makes it the preferred choice of many large
utilities world-wide.
METROLOGY
The ITRON meets O.I.M.L, EN 1359 and MID (certificate delivered by
the LNE), and more than 25 national metrological standards
(DVGW,NMI Class 1....).
Its design and the careful choice of materials enable the ITRON to
meet the highest demand in international markets in terms of
accuracy and long-term stability.
During the preliminary test controls on the sonic nozzle test benches,
all meters are tested at Qmin, 0.2 Qmax and Qmax.
OPERATING PRINCIPLE
The ITRON is a positive displacement diaphragm gas meter with a
stand-alone twin chamber measuring unit.
The twin chambers are each fitted with a flexible and gas-tight
diaphragm which is moved by the differential between the inlet and
outlet pressure. The Gas enters one side of the diaphragm pan while
on the other side it comes out through a separate port on the valve.
When one side is full, the rotating mono-valve moves on to the next
position, allowing the gas to fill the empty side. A transmission gear
and a mechanical coupling or stuffing box transfer the reciprocating
motion to the mechanical retrofitable index. The measuring unit is
housed in a robust gas-tight casing.
CONSTRUCTION
With its casing in steel, high protection against corrosion is ensured
by 500 hours salt fog spray test resistant cataphoresis treatment. The
aluminum version can withstand up to 1000 hours salt fog spray test.
The extreme strength of the case joint is achieved by rolling the belt &
compressing the flanges into contact with a sealant applied between
the faces. This forms a joint which is both gas-tight and fire- resistant.
MEASURING UNIT
The achievement of the fixed stroke mechanism is the result of
precision and high quality automation, and eliminates the need for an
adjustable tangent. This confines all registration adjustments to the
accessible change wheels behind the index.
The long life synthetic diaphragms, coupled to the well-proven
movement design, combine to give excellent stability and accuracy
during the whole life of the metre.
All materials have been selected for their superior resistance to
chemicals and gas. The valve and the grid, thanks to a special
Bakelite formulation, enjoy high gliding properties and are protected
against premature wear.
Finally, a back-run stop prevents the metre from running backwards
in case of tampering.
INDEX
The metres are available with metric or cubic inch indexes. They
come with a permanent magnet for pulse generation and can be
retrofitted with a pulse transmitter. Ip54 and Ip67 versions are
available for specific environments.
QUALITY ASSURANCE
Quality assurance procedures- such as ISO 9001- and strict controls
throughout the manufacturing process ensure a very high quality
level.
APPLICATION
The ITRON, with an installed base of over 30 million units, is a
versatile meter that makes it the preferred choice of many large
utilities world-wide.
METROLOGY
The ITRON meets O.I.M.L, EN 1359 and MID (certificate delivered by
the LNE), and more than 25 national metrological standards
(DVGW,NMI Class 1....).
Its design and the careful choice of materials enable the ITRON to
meet the highest demand in international markets in terms of
accuracy and long-term stability.
During the preliminary test controls on the sonic nozzle test benches,
all meters are tested at Qmin, 0.2 Qmax and Qmax.
OPERATING PRINCIPLE
The ITRON is a positive displacement diaphragm gas meter with a
stand-alone twin chamber measuring unit.
The twin chambers are each fitted with a flexible and gas-tight
diaphragm which is moved by the differential between the inlet and
outlet pressure. The Gas enters one side of the diaphragm pan while
on the other side it comes out through a separate port on the valve.
When one side is full, the rotating mono-valve moves on to the next
position, allowing the gas to fill the empty side. A transmission gear
and a mechanical coupling or stuffing box transfer the reciprocating
motion to the mechanical retrofitable index. The measuring unit is
housed in a robust gas-tight casing.
CONSTRUCTION
With its casing in steel, high protection against corrosion is ensured
by 500 hours salt fog spray test resistant cataphoresis treatment. The
aluminum version can withstand up to 1000 hours salt fog spray test.
The extreme strength of the case joint is achieved by rolling the belt &
compressing the flanges into contact with a sealant applied between
the faces. This forms a joint which is both gas-tight and fire- resistant.
MEASURING UNIT
The achievement of the fixed stroke mechanism is the result of
precision and high quality automation, and eliminates the need for an
adjustable tangent. This confines all registration adjustments to the
accessible change wheels behind the index.
The long life synthetic diaphragms, coupled to the well-proven
movement design, combine to give excellent stability and accuracy
during the whole life of the metre.
All materials have been selected for their superior resistance to
chemicals and gas. The valve and the grid, thanks to a special
Bakelite formulation, enjoy high gliding properties and are protected
against premature wear.
Finally, a back-run stop prevents the metre from running backwards
in case of tampering.
INDEX
The metres are available with metric or cubic inch indexes. They
come with a permanent magnet for pulse generation and can be
retrofitted with a pulse transmitter. Ip54 and Ip67 versions are
available for specific environments.
QUALITY ASSURANCE
Quality assurance procedures- such as ISO 9001- and strict controls
throughout the manufacturing process ensure a very high quality
level.



Prepaid Gas Meter


Sensus Meters


satndars

Introduction:

Equipped with our companys code controller, base meters are bought abroad to realize the prepaid and control functions, thus to achieve the automatic control of different functions of this new type of gas meter.
Range of application:
This product can be applied to the measurement of gas, natural gas, liquefied petroleum gas and other non-corrosive gases in the city.

Main features:

Automatic prepaid function: charging before using of it, water meter residual capacity= the original gas + newly purchased gas auto-control function: switching the gas path automatically according to the payments and gas situation.
Real time computation function: measuring on the real time and display the stock value, closing gas source automatically when the purchased gas is used up.

Power-down memory function: solid state recorder is internally installed and the data will be permanently preserved.

Status display function: displaying the amount of newly charged gas, the remaining stock and cumulative use, as well as low-voltage state etc.

Prompting function: warning when the remaining gas is used to the set value or other functions are out of work.

Overdrawing function: able to set a certain overdraft gas according to the user needs

Automatic alarm function: when the voltage is lower than certain point, alarm system will be operated and the battery must be replaced within 72 hours, otherwise, it will automatically shut down the gas resources.
Anti-gas-larceny function: shut down the gas supply automatically when there are theft of gas or illegal operations
Technical parameter:
Base meter operation criteria¦gb/t6869 q/ofd.001-2007 jjg577-2005
Current working voltage¦3.00v
Cuiescent current¦<=12va
Data hold¦>=8 years
Life span of valve¦switching frequency more than 5000 times
Accuracy degree¦level b
Four anti-function¦anti-attack, waterproof, anti-smoke, anti-knocking

Inert Gas Flow Meter

MF5600 Series Detachable Display Gas Flow Meters General description
MF5600 series mass flow meters are specially designed for applications where the display isoften required to be placed separated away from the flow channel or meter body, such as theoxygen metering system in a hospital. These meters are opted with the standard industrialuser interfaces (RS485 and 4 ~ 20mA), and user defined alarm functions for better monitoringor control over the network. The off-the-shelf products (MF5612 and MF5619) are for gasflow measurement of 0 ~ 300 SLPM and 0 ~ 800 SLPM, respectively.

MF5600 Series Detachable Display Gas Flow Meters Features and Applications
- Detachable display that can be placed away from the flow channel via a specially designed cable
- Standard 4 ~ 20 mA or RS485 for remote data communication
- Hygienic stainless steel body ready for oxygen metering
- Extended rangeability for accurate flow monitoring and control
- Intrinsic safe enclosure

MF5600 Series Detachable Display Gas Flow Meters Specifications
* Flow Range:
- MF5612: 0.3 ~ 200, 300 SLPM
- MF5619: 0.8 ~ 600, 800 SLPM
* Turn-down Ratio: 30:1
* Accuracy: ±(1.5+0.5 FS)%
* Repeatability: ±0.5%
* Max. Pressure: 1.0 MPa
* Operating Tenperature: -10 ~ +55'C
* Output: 4~20 mA; RS485; Pules

Gw series wireless transcription intelligent gas meter is high-tech integrative product. This series meter uses advanced wireless transmission technology. Through microelectronic control circuits, it converts the pulse signals of traditional mechanical meter into electrical signals. Then the metering data is transmitted to background platform through gprs network automatically, or it can be collected by a hand-held wireless unit from outside of the houses and after that downloaded to a computer through USB port.