The lightweight Lubricators enable the wireline tool string to be introduced or retrieved from a well bore under pressure. The lubricator can be used singly also can use multiply according to the requirement of the oilfield operation, but the seal control head always be assembled on the top of the lubricator. Single Lubricator is 0.8-3m, the number of lubricator and total length could be decided by operation. Titanium alloy Lubricator is much better quality and lightweight than normal steel materials.
The lightweight Lubricators usually consists of four basic parts: a quick union collar, a male quick union, a lubricator tube, and a female quick union.
1. Length of the Lubricator Riser could be customized according to working condition.
2. Drilling fluid, frac acidizing fluid, oil, gas and water can be working media.
3. Connection end of the Lubricator Riser could be flange or union.
4. Our Lubricator Riser is designed and manufactured according to API 16A.
DSP Coalescence-separation Diesel Fuel Oil Filtration Systems uses coalescing filter to separate the free and dissolved water from oil, meanwhile, it also equips separation filter, which removes the water drop by gravity, falling into the water tank. DSP Diesel Fuel Oil Filtration Systems equips micro filter elements to remove the particles and cleanness up to NAS 6 grade. The oil purifier realizes online running with fuel filled, turbine oil filled and lubricating oil filled systems, especially good for water- leakage systems.
Features:
1.Rapidly removing large amount of water from oil and water content reach 100 PPM.
2.The working conditions of all the parts are displayed clearly, monitoring, alarming, action control and safety stop enable the oil purifier to run online.
3.The coalesced oil takes the least restricted path to exit and rises or floats through the media to the top of the bulk liquid surface.
4. DSP Diesel Fuel Oil Filtration Systems can remove the impurities through coarse filter, protecting filter, and fine filter.
HOPU CYA Series centrifugal oil purifier is a centrifuge separator which can separate solid matters from two kinds of different density liquids on a continuous basis and also can separate two liquids simultaneously. By reducing process cycle time and labor requirements, these separators offer high cost efficiency in liquid clarification and reclamation, solid-liquid separation and its classification, recovery and thickening of solids and in other such processes.
Apply for lubrication oil, fuel, etc. two phase, three phase separating Effective separate substances and solids from liquids.
Fuel treatment, Lube oil treatment, Marine, Power stations, Oil field industry.
Centrifuge separator mainly apply to treat fuel, lubrication oil and other mineral oils in marine diesel engines and diesel generator sets in which contain water and mechanical impurities. HOPU CYA series will result in reducing mechanical wear of the diesel engines and other machines so as to greatly extend lifetime of machinery.
CYA series can also be applied to separate two different liquids with different proportion and being immiscible.
Features
Full automation possible with PLC automatic control panel.
Centrifugal separation requiring no filter media.
High reliability drive train system backed by delivery of over 1,000 units a year.
Bowl design with superior separation performance and with good response to discharge loads.
Pilot valve regulates total/partial discharge of solids.
Super partial discharger (option) minimizes liquid loss and maximizes thickening of solid
fraction for discharge.
Vibration-proof design realizes long working life.
Full automation possible with PLC automatic control panel(Optional).
Separated volume Rated value 2000 1500 2000 3000 6000 1500
(L/H) 0# Diesel oil 2200 1600 2200 3500 6500 1600
30# SAE LO. 1200 800 1200 1800 3600 800
180Cst/50HFO / 700 1100 1600 3500 700
Power(KW) Separator 2.2 1.5 3 5.5 11 1.5x2
Oil feed pump 1.5 1.5 1.5 1.5 2.2 1.5(1.5x2)
E-heating / / / / / /
Others 0.2 0.2 0.2 0.2 0.2 0.2
Various Vacuum Oil Purifier Oil Filter Element Parts For Different Stage Filtering
Oil Filter Element
Various Vacuum Oil Purifier Oil Filter Element Parts For Different Stage Filtering
Application:
This oil filter element is mainly suitable to oil purifier machine for remove the impurity and particles at vacuum state. It can always be used in transformer oil purifier,hydraulic oil purifier,lubricating oil purifier,turbine oil purifier,cooking oil purifier etc.This filter element is mainly composed of fiberglass ,stainless steel,aluminum,It also can be used for oil water separate equipment,air compressor, and the lubrication system of electric power industrial,metallurgical industrial,petroleum chemical industrial,machinery and equipment industrial etc.The 50~100 filter can be rewashing.
Product Description:
1. Mass media: general hydraulic oil phosphate ester hydraulic oil emulsion water - glycol
2. Material quality: glass fiber filter paper - BN stainless steel woven mesh - W wood pulp filter paper - P stainless steel sintering network -
3 .Filtration precision: 1 u to 100 u
4. Work pressure: 21 bar to 210 bar
5. Working medium: general hydraulic oil, hydraulic oil, phosphate ester emulsion, water - ethylene glycol
6. Working temperature: - 30 ~ + 110
7. Sealing material: fluorine aprons Nitrile butadiene rubber
Technical parameters:
Index name Unit 0.5 1 3 5 10 20 50 80 100
Flow rate L/s 10~400L/s
Filtration pressure MPa 0.3~0.4MPa
Working temperature - 30 ~ + 100
Features Fireproof, Static protection
Material Fiberglass Stainless steel Mesh
Top caps Aluminum alloy
End caps Galvanized
Weight Kg 2.2kg
Dimension mm 120mmx480mm
Our company export all kinds of Oil Purifier Machinewe have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ect. Please feel free to contact us.
Introduction
Sino-NSH centrifuge is a centrifugal separator which can separate solid matter from two kinds of different density liquids on a continuous basis and also to separate two liquids simultaneously. By reducing process cycle time and labor requirements, these separators offer high cost efficiency in liquid clarification and reclamation, solid-liquid separation and its classification, recovery and thickening of solids and in other such processes.
Description
Sino-NSH centrifugal separators, using principle of different density of oil, water, solid (light, heavy phases) getting different velocity, separate the insoluble liquids or solid particles.
After getting through heating system, the viscosity of oil lowers down. Then it is fed in through a system of closed lines. The heavy liquid phase is pressure discharged by means of a centripetal pump. The clean oil is also discharged by means of a centripetal pump. The centrifuges operate with regulating rings for the heavy phase.
Application
Apply for lubrication oil, fuel, etc. Two phase, three phase separating Effective separate substances and solids from liquids.
Fuel treatment, Lube oil treatment, Marine, Power stations, Oil field industry.
Centrifugal separator mainly apply to treat fuel, lubrication oil and other mineral oils in marine diesel engines and diesel generator sets in which contain water and mechanical impurities. CS series will result in reducing mechanical wear of the diesel engines and other machines so as to greatly extend lifetime of machinery.
CS series can also be applied to separate two different liquids with different proportion and being immiscible.
Feature
• Full automation possible with PLC automatic control panel.
• Centrifugal separation requiring no filter media.
• High reliability drive train system backed by delivery of over 1,000 units a year.
• Bowl design with superior separation performance and with good response to discharge loads.
• Pilot valve regulates total/partial discharge of solids.
• Super partial discharger (option) minimizes liquid loss and maximizes thickening of solid
• fraction for discharge.
• Vibration-proof design realizes long working life.
• Full automation possible with PLC automatic control panel
Application and Function:
LY series plate pressure oil purifier is specially designed for power station, electricity factory, mineral enterprise, lube depot, tractor station, petroleum, chemical engineering, metallurgy, national defense unit, etc, filtering water and impurities of transformer oil, turbine oil, engine oil, diesel oil, kerosene, aviation hydraulic oil and as well as filtering edible oil while using stainless steel. The machine is made up of filter bed, oil pump and rough filter. There are filtering media, such as filtering paper or filtering fuse, installed between the plastic filter board and filter plate that will be fixed to form a single filtering room under the pressure of the packing device. The filtering paper or filtering fuse packed between the filter board and filter plate will play a role of filtering. It's characterized by simple structure, easy operation, low cost, etc.
We are the leading oil purifier manufacturer all over the world.Chongqing Zhongneng Oil Purifier Manufacture Group engaged in developing, producing, selling a series of equipments that regenerate and purify all kinds of oils, such as engine oil, lubricating oil, transformer oil, turbine oil, insulating oil, fuel oil, mixed black oil and so on.Our oil purifiers have been exported to many countries and gain high reputation.
If this is not your needing type, follow is our catalogue for you to choose:
Series ZY Single-Stage Vacuum Transformer Oil Purifier
Series ZYD Double High Vacuum Transformer Oil Purifier
Series ZYB Multiply-Function insulating oil treatment machine
Series TY Turbine Oil Purification Apparatus
Series TYA Lubricating oil/ hydraulic oil purification unit
Series LYE Engine oil recycling machine
Series BOD black dirty oil regeneration equipment
Series DOD diesel oil regeneration equipment
Series TYB Portable light Fuel oil purification machine
Series LY Plate pressure oil purifier
Series TYD Vacuum dehydrator
Series JL Portable oil filtering and oiling machine
Series IIJ Oil Tester (BDV Tester)
The Pall HNP fluid conditioning purifier removes 100% of free water and as much as 80% of dissolved water. It also removes 100% of free and entrained gases and up to 80% of dissolved gases. Particulate removal is achieved using a high beta rated (5(c)=1000) Ultipor III filter element to polish the fluid before discharge back to the system reservoir.Other replacement filter media grades are also available to suit application requirements.
Replacement HNP series oil purifier is designed to filtering oil by remove water,air and dirty. Oil oxidation,Lubrication performance loss and aeration influence directly on reliability of system and service life of system component and oil.
The HNP can be moved from one system to another or left as a permanent installation. The HNP purifier is simply connected to an electric supply, the inlet valve opened and reset and start buttons pressed to start the fluid purifying process.
Automatic controls, integral to the unit, constantly monitor the operation and will safely shut down the system if fluid levels and pressures are outside normal limits.
Model HNP006 HNP021 HNP073 HNP200
Flow rate (L/min) 10 20 70 229
Inlet pressure(bar) 10 -0.4~0.4 -0.4~3 -0.4~3
Outlet Max pressure(bar) 10 7 7 8
Normal work vacuum(bar) -0.6 0.9
Inlet size G1 1/4 G1 G2 G4
Outlet size G1 G1 G1 1/2 G3
Motor power(KW) 0.67 2.25 6.4 22.7
Oil type Hydraulic oil,lube oil,turbine oil
Peak viscosity(cSt) 700
Temperature Range( ) 10~70
Net Weight(Kg) 75 180 450
(600 with heater) 1760
Size L(mm) 695 1090 1580 2679
W(mm) 455 620 680(1170 with heater) 1662
H(mm) 1041 Movable 1040 1880 (2113 With heater) 3266
Fixed 1020 1780
Dehydration Free water Remove 100%
Dissolved water Remove90% Remove 80% Remove 90%
Deaeration Free gas Remove 100%
Dissolved gas Remove 80%
No. Flow rate(L/min)
006 10
021 20
073 70
200 229
No. Voltage
M 220V 1PH
R 380V 1PH
T 415V 3PH
No. Frequency(Hz)
3 50Hz 3PH
4 60Hz 3PH
5 50Hz 1PH
LY series plate pressure oil purifier is mainly used to separate the impuritys and water from the oil. It is suitable for filtering the cooking oil, transformer oil, used lubricating oil and so on. There is filtering media, such as filtering paper or filtering cloth, installed between the plastic filter board and filter plate that will be fixed to form a single filtering room under the pressure of the packing device. The filtering paper or filtering fuse packed between the filter board and filter plate will play a role of filtering. It's characterized by simple structure,easy operation,low cost,etc.
Technical Parameters
Type LY-30 LY-50 LY-100 LY-125 LY-150 LY-200 LY-300
Rated Flow L/min 30 50 100 125 150 200 300
Working Pressure MPa 0 0.5
Filtering area ¡ 0.8 1.1 1.5 1.8 2.0 2.5 3.1
Plate Size mm 280 280
Compaction Method Manual screw clamping
Number of Filtering Frame 11 13 17 23 25 34 41
Number of Filtering Plate 12 14 18 25 26 35 42
Power 380V 50HZ
Power of Motor(KW) 1.1 1 5 2 2 2 2 3 4 5 5
Rotating Speed r/min 1440
Filter Precision m 5
Size of Filtering Cloth mm 300 300
Oil Inlet (outlet )
Diameter mm 32 32 42 42 50 50 60
Apparent
Size mm Length 700 800 850 850 950 1200 1400
Width 410 530 530 600 600 600 600
Height 800 930 930 1100 1100 1100 1100
Total Weight kg 80 95 130 190 210 250 300
Attention:Dimension and weight will be changed with changing the technical specification.
