The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
The multi-layer metal sintered mesh filter element is made of metal meshes with different wire diameters and meshes sorted in a certain order and sintered at high temperature. It has higher strength than stainless steel fiber felt, better permeability than metal powder products, uniform pore size distribution, good permeability, high strength, strong corrosion resistance, high temperature resistance, weldable, renewable, long life, easy to clean and not easy to break.
Product parameters
Material: stainless steel 304 or 316L;
Size: 1000mmx500mm, 1200mmx600mm, 1000mmx1000mm (customizable);
Filtration accuracy: 2um-300um;
Classification: single-layer, double-layer, three-layer, five-layer, seven-layer and multi-layer metal Note: Special specifications can be customized according to the requirements of the buyer.
Features
1.High strength and durability: This feature is achieved through high temperature sintering, which is a process of sintering material through heat and pressure without melting it. The high temperature sintering process enables the material to have a high level of strength and durability, making it resistant to wear and tear.
2.Anti-corrosion and heat resistance: This material can withstand high temperatures up to 600 C and is resistant to corrosion, which makes it ideal for use in harsh environments.
3.Steady filter rating: This material has a steady filter rating that ranges from 2 micron to 300 microns. This means that it can effectively filter out particles of different sizes, making it suitable for a wide range of applications.
4.Filter mesh not easy to deform: The filter mesh is protected by two layers, which makes it difficult to deform. This feature ensures that the filter mesh maintains its shape and continues to function effectively even under high pressure or high viscosity environments.
5.Versatile in manufacturing processes: This material can be cut, bent, punched, stretched, and welded, making it versatile in manufacturing processes. It can be easily customized to fit different shapes and sizes, making it suitable for a wide range of applications.
Application aspects and industries
Metal meshes of various wire sizes are sorted in a specific sequence, sintered at high temperatures, and used to create the multi-layer metal sintered mesh filter element. It is stronger than stainless steel fiber felt, more permeable than metal powder goods, evenly distributed pore size, strong corrosion resistance, high temperature resistance, weldable, renewable, long-lasting, simple to maintain, and difficult to break.
Multi-layer metal sintered mesh filter elements have many applications in the filtration of high-temperature and high-pressure media (liquid-solid separation, gas-solid separation), including oil sand separation in oil fields, high temperature gas dust removal, beverage filtration, oil filtration, and water treatment.
We offer a wide plethora of Zinc in many forms including LME registered
and non registered Special High Grade Ingots and Jumbos, cathodes,
dust, foil, granules, powder, pieces, anodize activated powder, shot,
and a mossy form.
Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is
malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air
at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc
on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
We are able to supply Tin in many forms including LME registered and
non registered, ingots, slabs, bars, foil, granules, powder, anodized
activated powder, shot, wire, sticks, ingots, and “mossy tin”.
Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline
structure. The element has two colours, with a cubic structure which changes at
allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is
cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This
change is affected by impurities such as Aluminium and Zinc, and can be prevented
by small additions of Antimony or Bismuth.
We put forward a high quality of assortment of Nickel which is available
in many forms including LME registered and non registered cathodes,
cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder,
flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods.
Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile,
somewhat ferromagnetic, and a fair conductor of heat and electricity
We are engaged in making Lead available in several forms including
LME registered and non registered 99.97% and 99.99% as well as
secondary ingots, foil, granules, powder, rod, shot, sheet, and wire.
Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a
relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes
upon exposure to air. Alloys include pewter and solder.
We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol
