This model is mainly used for balancing rotating work pieces, Such as large and medium- sized motor rotors, blowers, pump impellers, centrifugal, drying cylinders, and rollers, mine ventilator etc. The gimbals -driving offers several rotational speeds, large driving power, high precision and easy operation etc.
Specification Parameter:
Mass scope of workpiece(kg) 2000
Mass diameter of workpiece(mm) 1800
The distance between two bearing pedestals(mm) Min100
Journal diameter on roller carriages(mm) 40-240
Distance from coupling flange of drive shaft to center of farthest bearing (mm) 1800
Spindle speed(r/min) 280/560/900/1800
Motor Power(kw) 7.5(variable-frequency)
Universal coupling torque(N.m) 300
Minimum achievable Residual Unbalance(emar) 1g.mm/kg.
Balancing machines to measure unbalance of rotation parts like shafts, electric armatures, fans, and any rotating part in one plane or two planes, balancing machines for crankshafts. Capacity from 1 gram to 100 ton.
Ryq-3 turbocharger balancer/ balancing machine
Parameter
1.Maximum weight of workpiece: 0.1-3kg
2.Maximum diameter of workpiece: 350mm
3.Distance between two bearing pedestals: 30-450mm
4.Journal diameter on roller carriages: 4-17mm
5.Belt driving diameter: less than150mm
6.Rotation speed when the diameter of operationg transmission is 50mm:400-3000min r/mm
7.Minimum achievable residual unbalance: less than 0.5%
8.Unbalance reduction ratio: 90%
9.Motor power:0.09kw
10.Speed regulation way: frequency conversion speed regulation
This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, crankshaft, textile machinery, fans, shaft, etc .. Driven by belt, it is simple to load and unload, quick to start and with high precision and low failure rate.
Specifications Parameters
Max Mass of Workpiece (kg) 50
Max Diameter of Work piece (mm) 700
Distance between Two Support Bearings (mm) 80--700
Journal Diameter Scope of Work piece (mm) 8~80
Diameter Scope of Driving Belt (mm) 18~200
Rotation Speed when the Diameter of Driving Belt is 100mm (r/min) 650/1000/1300/2000
Motor Power (kw) 0.55/0.75
Min Achievable Residual Unbalance Amount (emar) 0.5g¡¤ mm/kg.
Yyq-16 belt drive hard bearing balancer/ balancing machine
Parameter
1.Maximum weight of workpiece: 0.3-16kg
2.Maximum diameter of workpiece: 500mm
3.Distance between two bearing pedestals: 50-550mm
4.Journal diameter on roller carriages: 5-36mm
5.Belt driving diameter: 15-200mm
6.Rotation speed when the diameter of operationg transmission is 100mm:400-2500min r/mm
7.Minimum achievable residual unbalance: less than 0.5%
8.Unbalance reduction ratio: 90%
9.Motor power:0.18kw
10.Speed regulation way: frequency conversion speed regulation
This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, turbocharger,textile machinery, fans,shaft, etc .. Driven by belt,it is simple to load and unload,quick to start and with high precision and low failure rate.
Specifications:
Parameters
Max Mass of Workpiece (kg)
50
Max Diameter of Workpiece (mm)
700
Distance between Two Support Bearings (mm)
80--700
Journal Diameter Scope of Workpiece (mm)
8~80
Diameter Scope of Driving Belt (mm)
18~200
Rotation Speed when the Diameter of Driving Belt is 100mm (r/min)
650/1000/1300/2000
Motor Power (kw)
0.55/0.75
Min Achievable Residual Unbalance Amount (emar)
0.5g mm/kg
This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, impeller,roller,textile machinery, fans, shaft, etc. Driven by belt, it is simple to load and unload, quick to start and with high precision and low failure rate.
Specifications Parameters:
Max Mass of Work piece (kg) 160
Max Diameter of Work piece (mm) 1000
Distance between Two Support Bearings (mm) 150--1200
Journal Diameter Scope of Work piece (mm) 10~140
Diameter Scope of Driving Belt (mm) 30~350
Rotation Speed when the Diameter of Driving Belt is 100mm (r/min) 798/1274/1596/2548
Motor Power (kw) 1.3/1.8
Min Achievable Residual Unbalance Amount (emar) 0.5g mm/kg.
GASES THAT WE CAN PROVIDE FROM CHINA AND EUROPE IN DOT CYLINDERS ARE AS FOLLOWS:
R-11
R-12
R-13
R-22
R-23
R-32
R-113
R-113a
R-123
R-124
R-125
R-134a
R-141b
R-142b
R-143a
R-152a
R-404a
R-406a
R-407c
R-409a
R-410a
R-415b
R-500
R-502
R-507 GASES ARE AVAILABLE IN CYLINDERS AND DRUMS DEPENDING ON THE TYPE OF GAS AND THEIR WEIGHT
Supplier: Refrigeration gases, copper coils for refrigeration, motors, air filters, compressors, valves, pipes, all kinds of oil and gas related products Services: Balancing machines for aircraft and shipping industry
