Blast furnace slag is a nonmetallic coproduct produced in the process. It consists primarily of silicates, aluminosilicates, and calcium-alumina-silicates. The molten slag, which absorbs much of the sulfur from the charge, comprises about 20 percent by mass of iron production. The average chemical composition of the material is the following: CaO 36.50% MgO 7.90% Al2O3 11.70% MnO 1.13 % K2O 0.43 % Na2O 0.22% FeO 1.71 % SiO2 38.73% TiO2 0.69% S 0.86% We have available two different lots of slag GRANULATED BLAST FURNACE SLAG The granulated blast-furnace slag is sand-type slag manufactured by spraying high-pressure water jets on a blast-furnace molten slag.
Origin :- Vietnam . India
Fly ash, also known as flue-ash is a residue which is generated during combustion and consists of fine particles. There are impurities in coal which mostly consist of clays, limestone and dolomite particles. These turn up into ash as they cannot be completely burned.
Fly ash is useful in a number of ways and is one of the most researched upon mineral source. It is mainly a pozzolanic substance which contains aluminum and silicon material which in return due to the presence of water can take form of cement.
A lot of research and development initiative have been taken place across the globe to build and develop technologies that can utilize the full potential of fly ash. Royal Mineral takes care to ensure flawless production stages.
Coal Fly Ash
CFA could be used in huge quantities in two areas: ash dyke construction and low-lying region filling [26,27,28]. In several affluent countries, CFA has been utilized successfully as a structural filler.
Fly ash is a by-product of coal burning at the utility plants. As coal is burned, non-combustible mineral impurities in coal evaporate andcondense into tiny particles of glass, almost totally spherical inshape. The individual particles are very small, like talcum powderand are carried up and out of the boiler in the flow of exhaust gasesleaving the boiler after the coal is consumed.
The fly ash particlesare removed from the exhaust stream in bag houses or electrostatic precipitators and then stored for later shipment
The difference between fly ash and Portland cement becomes apparentunder a microscope. Fly ash particles are almost totally spherical inshape allowing them to flow and blend freely in mixture. Thatcapability is one of the properties making fly ash adesirable admixture of concrete.
