Pinnacle Fire & Security Systems

"Product name
Fire Extinguisher Cylinder
Type
0.5kg/0.8kg/1.2kg/1.3kg/1.35kg/Cutomized
Material
Steel
Usage
CO2 Fire Fighring
Keywords
Co2 Fire Extinguisher
Color
Customer Request
Working pressure
150bar"

It use to open the door. We have mutiple open door methods , like keypad pin code, fingerprint , face indentification models.

Intelligent fire Detection system as a high efficiency and low cost unmanned fire detection system in capable of an early detection regardless spontaneously fire or firebug.
This system is located in outdoor area such small and middle sized cultureal assets, natural monument and outdoor facilities.

Size: L420*W330*H980mm
Material: 304 Brushed stainless steel
Arm lengthï¼?500mm
Passageway wide ï¼?550mm

A fire alarm system is a set of electric/electronic devices/equipment working together to detect and alert people through visual and audio appliances when smoke/fire is present. These alarms may be activated from smoke detectors, heat detectors, water flow sensors, which are automatic or from a manual fire alarm pull station.

Types of Fire Alarm System:
All Fire Alarm Systems essentially operate on the same principle. If a detector detects smoke or heat or someone operates a break glass unit (manual break point), then alarm sounders operate to warn others in the building that there may be a fire and to evacuate. It may also incorporate remote signaling equipment which would alert the fire brigade via a central station.

Conventional Fire Alarm System
In a Conventional Fire Alarm System, a number of call points and detectors are wired to the Fire Alarm Control Panel in Zones. A Zone is a circuit and typically one would wire a circuit per floor or fire compartment. The Fire Alarm Control Panel has a number of Zone Lamps. The reason for having Zones is to give a rough idea as to where a fire has occurred. This is important for the fire brigade and of course for the building management. The accuracy of knowing where a fire has started is controlled by the number of Zones a Control Panel has and the number of circuits that have been wired within the building. The Control Panel is wired to a minimum of two sounder circuits which could contain bells, electronic sounders or other audible devices. Each circuit has an end of line device which is used for monitoring purposes.

Addressable Fire Alarm System
The detection principle of an Addressable System (Fire Alarm System) is similar to a Conventional System except that the Control Panel can determine exactly which detector or call point has initiated the alarm. The detection circuit is wired as a loop and multi devices may be connected to each loop. The detectors are essentially Conventional Detectors, with an address built in. The address in each detector is set by dil switches and the Control Panel is programmed to display the information required when that particular detector is operated. Additional Field Devices are available which may be wired to the loop for detection only i.e. it is possible to detect a normally open contact closing such as sprinkler flow switch, or a normally closed contact opening.

Fire Alarm System comes with single loop as well as multi loops. It depends on requirement. The items which are integrated with Fire Alarm Systems are given belowâ?¦.

Brands are available : AGNI, MORLEY, NOTIFIER,

Modern Technologies gives you top class branded Fire Alarm System with affordable price. We also provide installation & maintenance services.

The Notifier NBG-12 Series Pull Station is a fire alarm initiation device that allows manual activation of the fire alarm system. It typically consists of a red or yellow manual-pull handle or lever, which when activated, sends a signal to the fire alarm control panel to initiate an alarm. The NBG-12 series is designed for use in fire alarm systems and is commonly used in commercial, industrial, and residential buildings. The product is known for its durability and reliability, and it meets industry standards for fire alarm systems.

"Total Weight - 1.3 KG
Diameter - 146mm
Activation Time - Approx 10 seconds
Warning Sound - 120 - 140 dBA
Fire Extinguish for an area - 3 Cubic Meters"

Key Specifications :
Work on all types of fire
Automatically activates upon contact with flames
Simple to use, no training required
Ideal for homes, offices, hotel, industrial settings
provides fast and reliable fire safety
No maintenance cost required for Agni Kawach fire extinguisher ball."

Model: RTU5025
Name: GSM 3G Gate Opener Access Control
The GSM 3G Gate Opener is special for authorized door access, and require turning ON/OFF your equipments remotely with a FREE call from your mobile phone and protect your assets. It supports to open the gate at the specified time. Also, the historical data can be read out via USB port.
The RTU5025 supports GPRS communication function, very suitable for remotely monitoring outdoor cabinets and stations of telecom company, traffic origination, power supply company and so on. It can be authorized different repair person or maintains person to open the cabinets or stations at the specified time, saving time to get the keys for the locks and saving cost to repair or replace the locks while the person lost the key. And also can remote monitoring the door is opened or closed, or illegal opened.
1. Quad-band, 3G WCDMA, 3G CDMA, can work in the worldwide GSM and 3G Networks;
2. No call charges. the GPRS-3G Gate Opener rejects the call from authorized number then carries out the turn ON/OFF action on the first 'ring';
3. Multiple applications. (gates, bollards, barriers, garage doors, shutters and access doors or machines);
4. Add or remove users by SMS Text command or over GPRS Network or USB Port;
5. No need to provide a remote control or keys for different users;
6. Up to 999 authorized phone numbers can be configured at the specified time;
7. Remotely upload the historical data or via USB port, the record capacity is 10000events;
8. 1 Digital inputs for motion sensors or other sensors to protect your door and windows;
9. 1 input special for monitoring door status and automatically armed when door closed;
10. 1 output with relay rating 3A/240VAC for connecting the switch of the door or machines;

Access Control System Tripod Turnstile Gate
Tripod Turnstile Main Functions:
(1) Tripod Turnstile Easy to install, use and maintain.
(2) Tripod Turnstile direction can be set as single-direction or bi-direction.
(3) Arms auto drop when power off, complying with fire safety requirements.
(4) Tripod Turnstile can be integrated with magnetic card, barcode scanner, counter, swallow machine, token accepter, and fingerprint machine and so on by standard electrical interface.

Tripod Turnstile Specifications Sheet:
Item: Description:
Framework: 304 (Standard).
Thickness of Ply: 1.2mm (Standard).
Dimensions: (L)1200* (W)280 *(H)990 (mm)
Finishing: Brushed (Standard) / Fingerprint processing
Pass width: ¡¡¡ì1500mm (Can be customized))
Weight: 55Kg
Operation direction: Single direction / Bi-direction
Power Voltage: AC220V +/- 10V 50Hz
AC110V +/- 10V 60Hz
Work Environment: Indoor / Outdoor
Pass rate: 35person/ minute
Power Consumption: 20W/24V
Operating Temp.: -15oC ~ 60oC
Operating Humidity: 0 ~ 95% without concretion
Emergency: Automatic arm drop down
Input: 12v dry contact

Access Control System Tripod Turnstile Gate
 Tripod Turnstile Specific Function:
(1) Electromagnet lock, photoelectric unlock, long service life, High operation dependability and fast response.
(2) The whole system runs smoothly, low noise, no mechanical impact.
(3) Tripod Turnstile Self-test function, when power on, system restoration automatic.
(4) Tripod Turnstile working modes selectable: bi-direction card reading;
One direction cards reading and another no reading; one direction card reading and another freely. Working modes can be set in the control panel.
(5) When power off, Tripod Turnstile arms will drop automatically, to meet the special needs of users and fire safety requirements. While power on later, arm should be lift by hand.
(6) Tripod Turnstile easy integrate with computer to control and manage hallway access.
(7) When connect the access control system, you can know how many person through the machine by computer directly.
(8) Tripod Turnstile passing direction will be shown by LED and passengers will know which direction is allowed to pass.
(9) Card reading memory or card reading without memory function can be set in the control panel menu according to your request.
(10) By software, the people who can pass through or not can be set to meet special request.
(11) Automatic reset function. When the Tripod Turnstile receives an open single, but passenger do not pass through the Tripod Turnstile hallway within a specific time (Default 5s), machine arm will lock again. Limit passing time can be set.
(12) ISO 9001 Quality Assurance and CE certification.

Access Control System Tripod Turnstile Gate
Tripod Turnstile Applications
Amusement Park
Airport
Buildings offices
Enterprises
Exhibition centers
Entertainment centers
Industrial
Living garden
Museums
Railways
Stadium
Seaports
Ski resorts
Schools
Shops
Supermarkets
Public Park
Water Park
And so on

Contact info:
Company Name: Daosafe Technology Co., Ltd.



Export Standard Wooden Package