13%-15%
Penetration Worked 60
GB/T 269
240-250
Dropping point min
GB/T 4929
135-140
Copper Corrosion
GB/T 7326
pass
Base Fluid Properties
Base Fluid Type
Mineral
Viscosity @40 cst
GB/T 265
185
Viscosity @100 cst
GB/T 265
12
Pour Point
-20
Propertie
Great in anti-water;
Better mechanical invariability;
Better anti-rust;
Good oxidation stability;
Can take place of calcium base and sodium base greases.
This product is made of refined base oil, thickened by fatty acid metallic soap thickener, added with many kinds of additives, for instance, abrasion and extreme pressure resisting, anti-corrosive, antioxidant and rustproof etc.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs.
Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field.
Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency.
Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment,
as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point.
Applications and Compressor Type
HFC, HCFC, HFO Refrigeration
Reciprocating, Screw, Centrifugal Compressors
Features and Benefits
Thermally stable Longer system life
Improved oil management Efficiency gains
Corrosion protection Enhanced system reliability and reduced downtime
Excellent bearing lubrication Longer compressor Life
Optimized System performance Reduced operating costs
Environmentally friendly Biodegradable
Excellent lubricity Increased efficiency, reduced cost of operation
Outstanding Miscibility
The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase.
Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Soles 170, as a polyol ester has a controlled level of miscibility with HFC gases.
Excellent Thermal Stability
Sealed tube results (ASHRAE 97) indicate that Solest�® 170 provides excellent stability in the presence of HFC
refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other
materials of construction.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field.
Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC
lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency.
Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point.
Applications and Compressor Type
HFC, HCFC, HFO Refrigeration
Reciprocating, Screw, Centrifugal Compressors
Features and Benefits
Thermally stable Longer system life
Improved oil management Efficiency gains
Corrosion protection Enhanced system reliability and reduced down-time
Excellent bearing lubrication Longer compressor Life
Optimized System performance Reduced operating costs
Environmentally friendly Biodegradable
Excellent lubricity Increased efficiency, reduced cost of operation
Outstanding Miscibility
The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase.
Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 170, as a polyol ester has a controlled level of miscibility with HFC gases.
Excellent Thermal Stability
Sealed tube results (ASHRAE 97) indicate that Solest 170 provides excellent stability in the presence of HFC
refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other
materials of construction.
ANTAR As a petroleum lubrication technology enterprise that rose in the East, since its establishment, it has been committed to the research and development of lubricant technology. Its products can be applied in fields such as lubrication, anti-wear and energy conservation, and heavy machinery friction,and it researches, develops, and sells various ultra-highperformance lubricating oils suitable for automobiles, ships, and industries.
With the vision of "Leading Lubrication Technology, Empowering Global Indus-try", ANTAR has rapidly developed into a global leader in the field of
lubrication solutions. With a modern production base covering an area of 40.000square meters, ANTAR not only plows deep into the Chinese market
but also expands its business territory to many countries and regions in Asia. Europe and North America, and establishes a sales and service network covering the whole world.
ANTAR has established long-term cooperative relationships with internationally renowned companies to jointly promote the innovation and application of lubrication technology and provide customers around the world with high-quality lubrication solutions without boundaries.
All ANTAR products fully meet the International Organization for Standardization (ISO), the American Petroleum Institute (API), the Society of Automotive
Engineers (SAE), the U.S. Environmental Protection Agency EPA, and other standardized production.
The products meet the certification standards of many international mainstream manufacturers such as CUMMINS, VOLVO, MAN, Mercedes-Benz, and Porsche.
BMW, Automobile Manufacturers Association of Europe (ACEA), European Union CE, etc., as well as the installations of Audi, Volkswagen, Porsche, MercedesBenz, Volvo, BMW, Mack, Mann, Renault, Cummins and other many engine manufacturers, After-sales service oil certification, and is widely accepted and used by motorsports organizations around the world.
We have passed IS09001:2015 quality management system certification, IS014001:2015 environmental management system certification, and OHSAS18001:2007 occupational health and safety management system certification to ensure that every step from raw material procurement to finished product shipment meets the latest international standards.
