FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags.
Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
Material Rubber
Color Black, Red, White, Green, Yellow
Size/ Diameter 100 Meters
Length of Pipe Water, Chemical,etc
Elastomer Processors manufacturer & exporter of silicone rubber tube from size 0.2 mm ID to 200 mm ID with wall thickness from 0.2 mm to 10 mm as per customer requirement in all type of colour like REd, Black, White, Green, Orange, Blue, Yellow, Violet etc
Hello,
We are direct exporter and seller of silicone rubber scraps , coming from mobile keypads, silicone sealant waste, silicone rubber scraps coming from insulators, silicone rubber scraps from pipe grade etc.
For medical equipment such as ventilators. Thermal insulation pad XK-P20 offers a high reliable performance, produced by IATF16949 certified factory.
(1) More than 20% profit can grow, because using GLPOLY thermal gap pad.
(2) Market share will increase 20% , from purchasing the high stability quality product made by GLPOLY
(3) What GLPOLY can provide, no second in China.
GLPOLY recommends XK-P20, which can service the thermal structure inside medical equipment, such as the MRI, CT, ventilator etc. GLPOLY thermal gap pad with thermal conductivity of 2.0 ~ 3.0 w/m �· k is satisfied, which have been supplied to more than 10 medical equipment companies, exported abroad.
In the domestic material market, are mixed up with good and inferior quality. So which brand can be trusted, that must the one that hold some experience in medical electronics. GLPOLY is one of these trusted brands
In the face of the unprecedented shortage of medical devices, the export of products made in China also needs quality certification. GLPOLYs thermal insulation materials have RoHS report and UL. For urgent medical needs, we will give priority to produce and delivery and provide the best quality.
Beijing Wandong Medical Co., Ltd. is a customer we have been cooperating with for many years, they make MRI and CT devices. GLPOLY provides them with thermal gap filler pad XK-P20S, thermal conductivity 2.0 w/m �· k, thickness of 0.7 mm required by the drawing, breakdown voltage measured to be greater than 10KV. In addition, increasing the tensile strength of the material and control the silicone oil content. Medical equipment have very strict quality control, but compared with well-known brands such as Hankel, 3M, Fujipoly, Customer Wandong Medical chose GLPOLY.
In fact, If know more the details of GLPOLY brand, can find our 70% of our products are used in new energy vehicles, so:
(1) The factory has already obtained the certifactions of IATF16949, ISO14001 and OHSAS180001, and its quality control has been higher than most peers.
(2) XK-P20 thermal insulation pad with many years of product experience in medical electronics, so that no quality defection
(3) Passed SGS test. Comply with export standards
(4) The service life is as long as 10 years. The operating temperature is -50~220flammability level is UL94 V-0
To sum up, what GLPOLY can provide is good quality, high performance thermal management materials for export.
Silicon is the material most commonly used in the manufacturing of photovoltaic (PV) cells. In the current study, laboratory experiments of purification of solar cell silicon materials through filtration are carried out.
All such of manufacturing process We supplies a Silicon metal in various form and Selling(exporting) to China, Eastern Europe, Russia and India.
Description
Crystalline silicon is a lustrous, Black-greyish color, while the Amorphous form of silicon is a dark brown powder. Making up 25% of the earth's crust, silicon metal is the second most abundant element, following oxygen. Silicon is not found freely in nature, but can form more compounds than any other element, except carbon. It is a most important to semi conducting elements. Silicon and its compounds have some of the most useful mechanical, thermal, optical, and electrical properties to mankind.
Shreeya International also cater to various Aluminium Alloy manufacturers for various grades of Silicon.
Acetic GP Silicone removable Sealant fact cure sealant adhesive for indoor
Supply Ability:
1000000 Piece/Pieces per Month high quality windshield structural auto glass silicone sealant
Packaging & Delivery
Packaging Details
For 260ml,24pcs/carton,carton size:295*195*24mm,2080ctns/20ft
For 300ml,24pcs/carton,carton size:307*207*250mm,1850ctns/20ft
For 590ml,20pcs/carton,carton size:360*250*200mm,1550ctns/20ft
Port: Qingdao Port
Lead Time : 5-15 days, depends on order details, payment time
Colors:
Clear, Black,
White, Grey,
Brown, Bronze ,
requested by customer
2019 New Arrival Free Samples Mirror Glass Window Car Windshield Rubber adhesive for corian
Performance
Standard
Measured Value
Testing Method
Test at 50±5% RH and temperature 23±20C:
Density (g/cm3)
±0.1
0.97
GB/T 13477
Tack-Free Time (min)
180
12
GB/T 13477
Tack-Free Time (min)
80
1000
GB/T 13477
Tensile Modulus (Mpa) /23
0.4
0.18
GB/T 13477
Slumpability (mm) vertical
not change shape
not change shape
GB/T 13477
Slumpability (mm) horizontal
30
GB/T 13477
Curing Speed (mm/d)
23
As Cured -After 21 days at 50±5% RH and temperature 23±20C:
Hardness (Shore A)
20~60
34
GB/T 531
Tensile Strength under Standard Conditions (Mpa)
/
0.4
GB/T 13477
Elongation of Rupture (%)
/
88
GB/T 13477
Movement Capability (%)
20
20
GB/T 13477
Storage
12 Months
