Synthetic technology motor oil specially designed for modern high performance engine with gasoline direct injection (GDI and Turbo-GDI) systems. Developed by latest evolution technology platform EVOTEC fortified with SMART Molecules that improve engine cleanliness and prevent low-sped pre-ignition (LSPI). Outstanding low friction and heat resistance enhance acceleration response, wear prevention and maintaining engine power for better drivability in all situations.
APPLICATION
Designed for high performance gasoline engine both GDI and Turbo-GDI.
Recommended for passenger car, sport car and SUV equipped with start-stop system.
Suitable for all port fuel injection (PFI) gasoline engines running with unleaded gasoline (ULG) and ethanol blended gasoline (E10, E20 and E85).
KEY FEATURES
Enhance excellent engine cleanliness especially in piston and help reduce LSPI occurrence in Turbo-GDI engine by SMART Molecules.
Improve superb engine protection against wear and prevent timing chain elongation for maintaining maximum engine performance.
Outstanding low oil friction with high heat resistance by EVOTEC technology for superior acceleration responsiveness and reduced oil consumption.
Better oil degradation resistance and engine sludge prevention through oil drain intervals.
Product Properties for AdBlue as per the revised ISO22241 standard.
Urea 32,5 % (approximate) solution dissolved within deionised water. As required by SCR equipped vehicles under the provisions of Emissions standards Euro IV (Euro4), Euro V (Euro5) & Euro VI (Euro6).
Urea Content 31.8 33.2 % by weight
Density at 20C 1.0870 1.0930 g/cm
Refracting Index at 20C 1.3814 1.3843
Alkalinity as NH3 0.2 %
Biuret 0.3 %
Aldehyde 5 mg/kg
Insolubles 20 mg/kg
Phosphate (PO4) 0.5 mg/kg
Calcium 0.5 mg/kg
Iron 0.5 mg/kg
Copper 0.2 mg/kg
Zinc 0.2 mg/kg
Chromium 0.2 mg/kg
Nickel 0.2 mg/kg
Aluminium 0.5 mg/kg
Magnesium 0.5 mg/kg
Sodium 0.5 mg/kg
Potassium 0.5 mg/kg
13%-15%
Penetration Worked 60
GB/T 269
240-250
Dropping point min
GB/T 4929
135-140
Copper Corrosion
GB/T 7326
pass
Base Fluid Properties
Base Fluid Type
Mineral
Viscosity @40 cst
GB/T 265
185
Viscosity @100 cst
GB/T 265
12
Pour Point
-20
Propertie
Great in anti-water;
Better mechanical invariability;
Better anti-rust;
Good oxidation stability;
Can take place of calcium base and sodium base greases.
This product is made of refined base oil, thickened by fatty acid metallic soap thickener, added with many kinds of additives, for instance, abrasion and extreme pressure resisting, anti-corrosive, antioxidant and rustproof etc.
Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs.
Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.
Supplier From
Busan,
South Korea (Republic Of Korea)
Supplier: Pump pv22, used korean hyundai & kia engine with gearbox, organic fertilizer, used volvo and scania engine with gearbox, arnold palmer golf shoes
Texol ATF Dex VI is a new generation, Premium class, fully synthetic, multi-vehicle ATF suitable for current and all previous types of vehicles needing Dexron type Transmission fluids. The product is made using fully synthetic base oils and carefully selected friction modifiers, anti-wear additives, viscosity index improvers and oxidation inhibitors. Synthetic base oil provides high viscosity index and high operating range besides providing very low pour point.
Applications
Texol ATF Dex VI is a multi-vehicle ATF recommended for almost all the latest automatic transmissions needing Dexron VI and Mercon LV fluids. It is suitable for Voith, BMW and ZF transmission oils such as 5 speed, 6 speed, 7 speed, 8 speed and 9 speed gear boxes (Lifeguard), besides applications requiring JASO 1A oil. Texol ATF Dex VI is recommended for use in Allison C3, C4
applications, Chrysler ATF +3 and +4; ATF 134, T-IV, Type WS, Mopar 8&9, SP-IV, LT 71141, 3309, 3403, etc.
Features and Benefits
Good viscosity/temperature characteristics.
High thermal stability.
Very good low temperature properties.
High stability to aging and high chemical resistance.
Resistance to wear and good friction characteristics.
Excellent corrosion protection.
Quality, Specifications and Approvals
GM DEX VI
JASO 1A
Texol's proprietary specifications.
Health and Safety
Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
