Capacity:
2 million m2/y~50 million m2/y (thickness of 9.5mm)
Automation:
Full automatic
Drying system:
Hot air stove drying system
Fuel:
Natural gas, heavy oil, coal and diesel
Main raw materials:
Gypsum powder, modified starch, foaming agent, glue and protective paper
Dimension of final product:
Thickness: 8mm-20mm.
Size of 9 square wave polycarbonate roofing sheets
Width: 1070mm
Thickness: 0.65mm - 1.5mm
Common length: 6m
Especially, providing the length according to the individual requirements of each customer
Technical characteristics of SkyLite polycarbonate awning:
* Using materials are SkyLite polycarbonate panels with UV resistance, high light transmission, sound insulation, good heat insulation.
* Negative link between the frame and the plate, minimizing the screw holes on the surface, avoiding the leak through the screw hole and high aesthetics.
Simple to transport and install, save time in construction and installation.
* Environmentally friendly, safe for users.
Category: standard plaster board. Fire-resistant gypsum board, moisture-resistant gypsum board.
Specifications:1200x2400mm 1220x2440mm 1220x1830 -----
Thickness:8 --- 16 mm
Products meet national standards of china, iso gypsum board standard and the united states astm c1396 standards.
The cellular polycarbonate skylight for metal roofs is a natural lighting system based on lines shaped in half barrel cellular polycarbonate.
All it's elements are designed under the norms of the SSR type roof systems.
DESIGN
All the elements that made up our system are attached to the base moldings and do not penetrate nor damage the SSR deck system at the end design to derail the water and ensure a smooth transition to the cover.
They can be placed in di�erent widths from 0.45 meters to 1.37 meters and 6mm or 8mm of cellular polycarbonate.
Our Roof Curbs are manufactured to meet equipment manufacturer'size requirements or the pipe penetration system.
Made with 14 or less gauge galvanized steel, with a minimal curb height of 8â?? and all welded ends for better herm. It can be install at any convenient location and as soon as the roof support members are in place. As a general rule, the curb should be placed directly on the roof support members.
DESIGN
The interior curb is designed according to the weight of the equipment, its dimensions and the propose of the equipment. The curb can also need additional nailing plates which can be provide and locate directly below the �anges of the curb to give further support and to minimize vibration.
The reinforcements in place are to consider as well the return and the supply of air. The exterior design allows the metal roof deck to expand or contract without folding or breaking, each and every roof curb is manufactured according to the roof system in place and the corresponding heating, ventilation and air conditioning system.
ADVANTAGES
Design according to equipment.
Welded joints.
Metal caps.
Custom Made.
Cost efficiency.
Certified quality assurance.
Easy on-site Installation.
Construction quality control at factory.
Perfect Hermeticity.
APPLICATIONS
AC units,
Chillers.
Cooling towers,
Large extractor.
