Supplier : Electrical & electronics like solar lighting, chargers, automotive parts , health care products, rubber parts, sheet metal, die casting, powder coating
Services : Screen & pad printing, plastic machining, injection molding, mold making Established: 2006
Standards: TUV CERTIFIED WITH ISO 9001-2008 ACCREDITATION
Verification Status
Contact Details:
Plot No 95, Road No 7, 3Rd Phase
K.i.a.d.b Industrial Area, Obdenahalli
Doddaballapura
Bangalore
561203
Karnataka
India
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol
We are engaged in making Lead available in several forms including
LME registered and non registered 99.97% and 99.99% as well as
secondary ingots, foil, granules, powder, rod, shot, sheet, and wire.
Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a
relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes
upon exposure to air. Alloys include pewter and solder.
We put forward a high quality of assortment of Nickel which is available
in many forms including LME registered and non registered cathodes,
cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder,
flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods.
Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile,
somewhat ferromagnetic, and a fair conductor of heat and electricity
Fasteners are the general term of the class of mechanical parts used in fastening two or more parts (or components) into a whole. It is widely used in energy, electronics, electrical appliances, machinery, chemical, metallurgy, mold, hydraulic and other industries, at the same time, in various kinds of machinery, equipment, vehicles, ships, railway, bridge, construction, structure, tools, instruments, chemical, instruments and supplies, you can see all kinds of fasteners, is the most widely used mechanical foundation parts. It is characterized by a wide variety of variety specifications, different performance uses, and a very high degree of standardization, series, and generalization. Therefore, a class of fasteners that already have national standards is called standard fasteners, or simply standard ones.
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing.
Main Specification
(Customized size is acceptable.) 3.0mm thickness
* 12mm width *15m roll length
2.5mm thickness * 8mm width * 15m roll length
2 mm thickness * 15mm width * 20m roll length
2.5 mm thickness * 8mm width * 20m roll length
Main Color
black, grey, white
Technical Data
Product Series FOCUS-6100
Application Composite Materials Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 23N/cm
Tensile Strength 220KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion.
Wide application temperature range.
Excellent performance in waterproofing and sealing.
Applications
* During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent
sealing property between vacuum bags and molds.
* During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds.
* As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht.
* Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively.
Specifications:
Appearance white powder
F 52% min
Al 12% min
Na 33% max
SiO2 0.36% max
Fe2O3 0.08% max
CaO 0.5% max
P2O5 0.03% max
SO4 0.6% max
H2O 0.4% max
Loss on ignition 2 % max
Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels.
Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
Product Features
Appearance : White Or Light Yellow Crystal Powder
Odour: Sulfur Dioxide
Taste : Salty
Melting Poing : 150
Specific Density1.48
Ph : 4.0-4.6
Solubility : Soluble In Water ,insoluble In Alcohol
Application:
1. For industry
Mordant of printing and dyeing; Dechlorinate of textile after bleaching;
Sulphonated agent and reducer of chemical industry and pharmacy;
Bleach of paper pulp, bamboo and timber bleach of stapk; Treatment agent of waste water; Rubber solidifying agent ;Perfume industry is served as hydrocarbon perfume aldehyde ;
The hide profession employ to do to molt dose and pliable dose and wearproof dose ,The sensitize industry is served as the developing agent reductant and the protection of fixing bath dose and so on; sewage treatment.
2.For food additive
Bleach agent (e.g.candies, cake, bamboo shoots, etc);Loose agent (e.g.bread, cracker etc);Antiseptic and germicide (e.g.fruit juice, tinned foodbrews, the cereals food is defended storage etc);Inhibitor and freshen agent (e.g.day lily, seafood, fruit and vegetable etc)
Specifications:
Na2S2O5 97% min
SO2 65% min
Fe 0.0015% max
water-Insoluble 0.01% max
As 0.0001% max
PH 4.0-4.6
Packing and Storage
Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
Product Physical Properties
WHITE POWDER CRYSTAL, SPECIFIC GRAVITY IS 1.586, IT CANDISSOLVE IN WATER, BUT CANT DISSOLVE IN ALCOHOL AND ACETINE.
Specifications:
Appearance: white free-flowing crystalline powder without agglomeration
Purity as Ammonium Bicarbonate ,% by weight 99.5 (minimum)
Chloride (as Cl), % by weight 0.20(maximum)
Sulphates (as SO4),% by weight 0.10(maximum)
Iron (as Fe), % by weight 0.004(maximum)
Nonvolatile matter, % by weight 0.10(maximum)
Heavy metals (as Pb), ppm 2.50(maximum)
Copper (as Cu), ppm 5.0(maximum)
Arsenic (as As), ppm 0.6(maximum)
Tarry matter To pass test
Oil Content Less than 10 ppm
Melamine Content NIL
USAGE
BAKING FOODS SUCH AS CRISP CAKE, BISCUIT ETC. IN ADDITION, ITALSO WIDELY USED IN CHEMICAL FIELD SUCH AS FLOUR BRIGHTENING AGENT,RARE EARTH DEEP PROCESSING, MEDICINE MIDBODY, PLASTICS PROCESSING,ELECTRONIC ELEMENT ETC.
PACKING
OUTSIDE IS WEAVE BAG OR PAPER BAG, INSIDE IS FOOD PLASTICSBAG, 25KG/BAG. THE PACKING ALSO CAN ACCORDING TO CONSUMERS REQUEST.
Characteristics: White powder or tiny crystalls, nodorousand salty, easily soluble in water,insoluble in alcohol, presenting slightly alkalinity, decomposed when heating. Decomposed slowly when exposed to moist air.
Quality Standard
Item The National Standard
The Total Alkalinity Content(NaHCO3)% 99.0, 100.5
Loss on Dring% 0.20
PH Value(10g/1) Solution, 8.6
Arsentic Content% 0.0001
Heavy Metal Content, 0.0005
Ammonium Salt pass
Clearness pass
Uses: food fermentation, feed addive, detergent ingredient, carbon dioxide foamer, pharmacy, leather, ore milling and metallurgy, detergent for wool, extinguisher and metal heat-treating, fiber and rubber industry, etc.
Packing:25kgs or 50kgs plastic woven bags lined with one layer polythene bag.
(We can meet with all your demands according with your need.)
