VNSEAL 104 is a two component, flexible cementitious waterproofing membrane consisting of a synthetic resin mixed with a blend of selected cement and well-graded fillers.
When mixed, VNSEAL 104 becomes a smoooth slurry and is easily applied by brush, roller or suitable spraying equipment.
VNSEAL 104 can be applied onto damp substrates. The cured membrane is flexible, durable and weather resistant and has excellent adhesion to most building substrates. Its unique chemical structure provides a breathable membrane that is permeable to water vapour and yet impermeable to water. VNSEAL 104 is capable of bridging hairline cracks.
Typical Uses:
Waterproofing of Basement walls and lift pits Waterproofing of potable water tanks, waterproofing of reservoirs, culverts, storm drains, canal, water retaining and water excluding structures.
Waterproofing of kitchens and toilets
Waterproofing of balconies and planter boxes
Waterproofing of swimming pools and water features
Waterproofing to precast gable end walls
Waterproofing to RC flat roof (re-roofing-exposed and concealed applications) and gutters.
Waterproofing to external wall prior to installation of claddings.
Advantages:
Pre-packed Easy to mix and apply
Excellent waterproofing qualities able to withstand high hydrostatic pressure
Excellent adhesion to concrete, masonry, ceramics, natural and artificial
Flexible able to bridge hairline cracks up to 2mm Does not contain chloride or other corrosive salts which cause efflorescence Non toxic- suitable for use in waterproofing of potable water tanks
Able to withstand light foot tracfficking
â?¢ Can be applied onto damp substrates
â?¢ Weathering resistant
Mixing Instructions:
Pour Part A (liquid) into Part B (powder)container and mix with a slow speed mechanical mixer until homogenous and lump free. Allow the mix to stand for 5 minutes and re-stir manually before use.
Application:
For horizontal and vertical surfaces, a roller, brush or spray gun, may be used to apply the slurry. Care must be taken to ensure that air is not entrapped in the membrane
Apply the first coat of VNSEAL 104 and allow it to dry. At the same time, ensure that all joints and corners are properly coated, preferable with a brush. Allow membrane to dry for approximately 2 hours before application of the second coat
VNSEAL 104 the professionals choice of quality products and system for building construction
Shelf life
Expiry date 12 months from the production date
Storage conditions
Dry, cool, shaded place
Packaging
1) Combo A: 4kg - B: 3kg
Component A is Grey powder: 4kg/barrel
component B is milky white liquid: 3kg/plastic can
2) Combo A: 10kg - B: 7,5kg
Component A is Grey powder: 10kg/barrel
component B is milky white liquid: 7,5kg/plastic can
3) Combo A: 20kg - B: 15kg
Component A is Grey powder: 20kg/barrel
component B is milky white liquid: 15kg/plastic can
Polyethylene(PE) takes the name of ethylene which is in the form of monomer. With several
methods of polymerization, Ethylene becomes Polyethylene. Ahed HDPE Geomembrane is a
geosynthetic liner which is formed as a result of extrusion of high density polyethylene and
shaped homogenously by calender system. It can be used in all projects where impermeability
is required.
Types:
HDPE Flat Geomembranes
HDPE one-side textured geomembranes
HDPE two-side textured geomembranes
LDPE geomembranes
LLDPE geomembranes
VLDPE geomembranes
HDPE T-Grip geomembranes
HDPE Discrete T-Grip geomembranes
HDPE one-side geotextile laminated geomembrane
Use Locations:
Landfills
Waste water repository and treatment
Drainage pits for collecting leakage of gold
and other mines
Oil tanks and oil fields
Sedimentation ponds
Fertilizer pits
Building foundations, if needed
Irrigation ponds
Tunnels
Irrigation canals
Bioenergy generation plants
Product Featurus
High resistance to chemicals
UV resistant
Less friction rate because of the textured layer
Highly resistant to organic and inorganic solvents
Profoundly resistant to the fractures
Resistant against natural conditions
Resistant to punctures and cracks
Low permeability
Higher tensile strenght
Ahed PVC Geomembranes are geosynthetic liners manufactured from PVC resin and other
synthetic raw materials and used in waterproofing applications. Ahed PVC geomembranes
have different types for different applications such as for pools, tunnels, irrigation channels,
pipes, building foundations, terraces and water reservoirs.
Use Locations
Building Foundations
Dams, transmission tunnels
Roofs and terraces
Carparks
Waste water treatments
Pools
Pond for agricultural irrigation purposes
Potable water reservoirs
Underpasses
Highway, railway tunnels
Subway stations and tunnels
Irrigation canals
Product Features:
Resistant to plant roots. Can be recycled. Resistant to temperatures between -40C and +70C.
Joints are welded with welding robots which can do double inlet welding. Resistant to aging and
corrusion. Enclosed class E� in combustion, no flame occurs. Long life span. High resistance
to mechanic shocks. High performance in tensile strenght, elongation and elasticity. Keeps high
eleasticity in cold weather conditions, never cracks. Can be manufactured as lamination with
geotextile fabric; UV beam resistant, signal layered (OPTIONAL). Since it is loose laid, it is affected at
the minimum degree as a result of movement in construction. Different colour and dimension options.
UV RESISTANT PVC GEOMEMBRAN:
It is made of PVC. Since it is manufactured
as UV Beam Resistant, it is called Pond
Type� Geomembrane. Because of UV
additive, it is direct sun beam resistant for
ages. That kind of AHED PVC Geomembrane
is comfortabely used without coating the
surface of it. It is manufactured in gray,
blue, yellow colours.
AHED PVC GEOMEMBRANES are
manufactured in a width of 2,10m; standard
lengths of 20m&25m; with thicknesses of
1,00mm & 1,20mm & 1,50mm & 2,00mm &
2,50mm & 3,00mm. When it is demanded,
they are manufactured in optional lengths.
