Silicon carbide sic electric heater rod for element temperatures up to 1625, for industrial and lab furnaces/ovens, available in a wide variety of standard sizes and geometries, or in customized designs.
Mosi2 heaters is a kind of resistance heating element basically made of high pure molybdenum disilicide.In oxidizing atmosphere, its max temperature can reach 1800 deg.C, and its applicable temperature is 500~1700 deg.C. It can be widely used in such applications as sintering and heating treating of ceramic, magnet , glass, metallurgy , refractory, ect.
All the specifications can be made according to your requirements. And our technical engineers are pleased to assist you!
There are u type?w type?l type(bend at lu)?l type(90° bend at lu)?straight type and other types for you to choose.
The silicon carbide(sic) heating element is a kind of non~metal high temperature electric heating element. It is made of selected super quality green silicon carbide as main material , which is made into blank, solid under high temperature and re~crystallized. Compared with metal electric heating element, this element is characterized by high~applied temperature , anti~oxidization, anti~corrosion, long service life, little deformation, easy installation and maintenance. Therefore , it is widely used in various high temperature electric furnaces and other electric heating devices, such as in the
Industries of magnet, ceramics, powder metallurgy, glass, metallurgy and machinery etc.
All the specifications can be made according to your requirements. And our technical engineers are pleased to assist you!
There are ed(rod) type?u type?w(three phase)type?g(gun)type?db(dumbbell)type?scr(double spiral)type?sc(single spiral)type?h type for you to choose.
API 16A BOP Annular BOP Packing element Spherical or Tapered Features:
1)Standard: API
2)Pressure: 2000~15000psi
3)Size: 7-1/16" to 21-1/4"
4)Annuar/Tapered type Available
5)Quick delivery.
6)Can interchange with shaffer hydril SK Rongsheng's packing element
API Spec 16A BOP Packing Elements Main technology parameters
1, Working pressure 2000~15000psi (21~70MPa)
2, Nominal bore7 1/16~21 1/4"(179.4~540mm)
3, According to the latest API Spec 16A standard, and quality standard of ISO9001.
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
