This tag is uhf frequency(include 860~868mhz and 902~928mhz), it can support iso18000-6c(epc gen2) protocol to read and write, the read range depends on the reader.It made by pu material, the size is 68*80*2mm.
We also can provide oem service, such as print on the tags according customer's specific requirement.
This tag is uhf frequency(include 860~868mhz and 902~928mhz), it can support iso18000-6c(epc gen2) protcol to read and write, the read range can up to 10~12m if use our uhf long range reader at the normal environment.
The size is 110mm*45mm*0.3mm, we also can help customer customize different size according customer's specific requirement.
It made by self-adhesive paper, can be fixed on the car windshield directly, mainly used for vehicle management in parking application.
BD-ONU-111-Z Series single-user ONU is designed for ONU in deferent FTTH solutions by , The carrier-
class FTTH application provides date service access.
BD-ONU-111-Z series adopts high-performance and low-consumption chips, and supports CTC 2.1
interconnection and interworking standard of China Telecom. With the help of NGBN View NMS, it can
provide subscribers with abundant services, and totally meet the needs of carrier-class FTTH devices.
BD-ONU-111-Z series is designed by ZTE chipset
Functional Feature
Color is optional
Router mode supports PPPoE/DHCP/ static IP
Support port-based rate limitation and bandwidth control
In compliant with IEEE802.3ah Standard
Up to 20KM transmission Distance
Support data encryption, group broadcasting, port Vlan separation, etc.
Support Dynamic Bandwidth Allocation (DBA)
Support ONU auto-discovery/Link detection/remote upgrade of software
Support VLAN division and user separation to avoid broadcast storm
Support broadcasting storm resistance function
Support ACL and SNMP to configure data packet filter flexibly
Specialized design for system breakdown prevention to maintain stable system
Support software online upgrading EMS network management based on SNMP, convenient for
Maintenance
iR2022 accommodates 2 of 2.5SATA III hard drive and offering both RAID 0 and RAID 1 functions . Uses the RAID 0 function to integrate the capacity of one hard drives and to enhance both read & write performance. On the other hand, uses RAID 1 function for data redundancy by mirroring data among both hard drives to prevent the event of a hard drive failure causes system shutdown.
Model No: iR2022
Interfaces: 7+15-pin SATA III (6.0Gb/s) Port
Compatible Drives: 2.5 SATA III, II, I HDD/SSD (x2)
Raid Level: RAID 0 / RAID 1
System Monitoring: Fan Failure, Overheat. HDD/SSD Failure
Cooling System: 4 cm Low Noise Fan
Operating System: Windows, Linux
Function Control Interface: GUI (Windows Only)
