Shenzhen Hongweicheng Electronics Co., Ltd.

Chip inductors

Volume: 0402, 0603, 0805, 1206, 1210
Unit: H, NH, UH, MH
Error: ±5%, ±10%
Packing: 4000PCS/reel, 3000PCS/reel above 1206
Current: the difference between small current and large current, unit A (A)
The SMD inductors in our inventory have complete specifications:
The conventional models are complete, including: chip beads, high current chip inductors, chip power inductors, high frequency inductors, chip winding inductors, laminated inductors, common mode inductors, shielded inductors, I-shaped inductors, etc.; Conventional inductance, rated current and other parameter products are available in stock.

The role of chip inductors:
1. Filtering
It can be used for power supply filtering because it has the characteristics of DC and AC resistance;
2. Resonance
It can form a resonant frequency selective circuit with a capacitor, and the resonant frequency is determined by the size of the chip inductance and capacitor;
3. Frequency division
Can be used for frequency division of high and low frequency signals
Application areas of chip inductors: Internet of Things products, smart products, Internet products, communication products, 3D printers, etc.

Item Specifics:
Model: PIM1030R12MZ
L0(uH)/inductance at 0A,100KH):Typ.:0.12
DCR (mª+)at 25ípC:Typ.0.65/Max:0.75
Irated(Adc)/Heat RatingCurrent :Typ.:30
Isat(Adc)/Saturation Current:Typ.:75
Available L0(uH):From 0.12 to 10.00
Molded Power Inductor
Operating temperature : -55íµ ~ +125íµ
Ambient Temperature, Maximum : 85íµ
Temperature Rise, Maximum: 40íµ
Features
Low profile, high current SMD type. Lowest DCR/µH, in this package size, low buzz noise due to its gap-less structure, RoHS compliant.
Frequency range up to 5MHz.
Lowest DCR/µH, in this package size
Low buzz noise due to its gap-less structure
RoHS compliant.
Applications
Notebook/Desktop/Server/Video Card applications.
High current POL converters.
Low profile, high current power supplies
Battery powered devices.
Ideal for power source circuits, DC-DC converter
DC-AC inverters inductor application.
Note:
1. L0 is inductance tested at 0 Adc.
2. Isat is the DC current which cause the inductance drop approximately 30% of its nominal inductance without current.
3. Irated is the DC current which cause the surface temperature of the part increase appproximately than 40íµ.
4. Operating Temperature Range: - 55íµ to +125íµ
5. The part temperature (ambient + temp rise ) should not exceed 125íµ under worse case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provision all affect the part temperature. Part temperature should be verified in the end application.
6. The rated current as listed is either the saturation current or the heating current depending on which value is lower.

Features:
Laminated ceramic allows high SRF
Closed magnetic circuits
Monolithic structure suitable for flow and reflow soldering
High resistance to heat and humidity
Operating temperature range: -40 to 105ípC
Applications:
Wireless communication
Mobile telephones
Video cameras and portable VCRs

Magnetic Shielded surface mount inductor with high current rating.

Low Resistance to keep power loss minimum.

PAGOODA chip inductor introduction:
Volume: 0402, 0603, 0805, 1206, 2520, 3225
4532, 5650
Sensitivity: 12NH, 15NH, 22NH, 39NH, 68NH
1R0K, 1R2K, 2R2K2R7K, 3R3K, 4R7K10uH, 15uH12uH18u22H1MH12MH 1.5MH18MH2.2MH......
Error: J=+5%K=±10%M=±20%, N=±30%
Inductors used in power supply mounting and circuits are produced with metal composite materials or ferrite materials. It is mainly used for circuits that realize voltage conversion that requires a specific voltage to provide stable power for ICs. The corresponding inductor is used in the power supply circuit, maintains the inductance when the current allows, and has the characteristics of low square resistance.
High Current
Slow down saturation and maintain high current characteristics
Low RDC
Improves high current efficiency through low branch resistance
PAGOODA high-end technology electronic component manufacturers, chip inductors have complete specifications, can provide samples, quality assurance, comprehensive technical support, welcome to inquire

We provide OEM,ODM service,you can customized your own design,put with your logo etc


From coil to the magnetic sheet/plastic or electronic parts/accessories,we can provide one step solution service with cost saving .

You can customized the wire material,wire size,coil dimension,coil turns, coil thickness, magnet,leading wire,resistance, inductance etc.

Wire size: start from 0.011mm -1.3mm /customized Coil Size: 0.1-3MM To 300MM /Customized
Wire material:enameled copper wire,silk cover /customized
winding style: self-adhensive, wet winding

by automatic and semi-automatic machine over 400

Coil Style:inductor coil,self-bonding coil,bobbin coil, hearing adis coil, antenna coil, ,RFID Coil, Sensor Coil,

Transformers,inductors,

Application of precision coil:

Hearing Aids,sound amplifiers,bluetooth,high-end earphone,medical equipment and instruction etc.



Customized service included:

Wire material

Wire size

Coil height

Number of Coil

Inductance

DCR

Etc



Customized process options

Clients Provide the design drawing

Clients Provide the Samples

Clients Provide the detailed data and requirements



Supply drawing is best, or tell us the size, inductance,

resistance, Q value, OD, ID, Turns, thickness, etc.

Sample lead time

1-3 days

Sample delivery

Ship via your agent

Ship via DHL/UPS/TNT/FEDEX/China Post



Bulk order Lead Time

7-15 Days

Supply Ability Of our factory

1000000 Piece/Pieces per Month

Quality Certification:ISO14000,ISO9000,ISO9001

IATF16149

Test Equipment/Laboratory certification:

1:High-Potting

2:combustion flame retardant experiement

3:Cold and hot shock/Thermal Shock

4: constant temperature and humidity test

5: Drop Test

6:the vibration test

7: PCT High pressure accelerated aging test

8: 2D Profile/two dimensional image measurements

9" X-ray fluorescence

ETC

Package: plastic bag. blister divider,carton etc

customized as per your products feature

Shipment

BY AIR,BY EXPRESS,BY SEA,BY TRAIN ETC

EX-WORK,FOB,CIF,DDP,DDU etc


Payment term: T/T L/C 30% Deposit and balance before shipment

Brand: pagooda
Application range: deflection
Type: fixed inductor
Model: 0510 0410
Package form: color ring inductor
Winding form: single-layer winding
Magnetic properties: hollow core
Core shape: E shape
Working frequency: high frequency
Installation method: vertical seal
Frame material: plastic
Inductance: 4R7K
Allowable error: M=�±20%
Inductive resistance XL: 20
Rated current: 30
Distributed capacitance: 22
Nominal voltage: 16
Color ring inductance (color code inductance): refers to the inductance that is painted with different color rings on the surface of the inductor to represent the inductance (similar to the resistor). It is usually represented by a four-color ring. The color ring at one end of the inductor is the first ring, and the other end with more natural colors of the inductor is the last ring. The first color circle is the tens digit, the second color circle is the single digit, the third color circle is the multiple to be multiplied (in mH), and the fourth color circle is the error rate.
Basic Features:
1. Sturdy structure, low cost, suitable for automated production.
2. Special iron core material, high Q value and self-resonant frequency.
3. The outer layer is treated with epoxy resin, which has high reliability.
4. Large inductance range and automatic plug-in.
Welcome friends who are interested to consult online

Specialising in the manufacture of various types of inductors, choke coils and linear filters.